See also: dumpster.
A skip (British English, Australian English, Hiberno-English and New Zealand English) (or skip bin) is a large open-topped waste container designed for loading onto a special type of lorry called a skip loader. Typically skip bins have a distinctive shape: the longitudinal cross-section of the skip bin is either a trapezium or two stacked trapezia. The lower trapezium has the smaller edge at the bottom of the skip bin, and a longer edge at the top. The smaller edge on either end is lower which makes it easier to load. Where there is an upper trapezium, it has the smaller edge at the top. There is a sloping floor or wall at each end. There are usually two lugs on each side of the bin onto which chains can be attached, permitting the heavy skip to be lifted onto and off a skip lorry or skip truck. A special skip-carrying lorry or crane is used.
One end of the skip sometimes has a large door that hinges down to allow manual loading and unloading, these skips are called 'drop-door skips'. Skips are usually durable and tough, made to withstand rough use by tradespeople and labourers. The size of skip bins can vary greatly depending on their use, with sizes ranging from small 2 m mini-skips to the very large 40 m roll-on/roll-off skips. Even though these large bins can store many tons of waste, most lorries are limited to carrying around 7.5 tons of material in the container.
A typical small skip, when empty, weighs about 187kg.
There are several types of skip containers:
Skips are commonly used to hold open-topped loads of construction and demolition waste, garden waste or other waste and litter types. The construction debris may originate from a building, renovation, or demolition site; building supplies can be delivered to a site in a skip that is later used to remove waste. Skips are also used for various cleaning-out jobs that need much material to be taken away, and at factories producing large quantities of scrap metal. The material in the skip may be taken to a landfill, recycled or recovered/disposed of in some other way. There are wide range of uses of skip bins including construction building, home renovations, handyman maintenance or repair projects, garden or green clean up.
Skip hire companies typically print 'level fill' on the sides of skips to instruct users that the contents should not fill or have contents showing above the height of the sides of the skip. This is a safety requirement, enforced by the DVSA, 2 m – miniature skip 4 m – medium skip 6 m – builders skip 8 m – large builders skip Refrigerators and other white goods can be put in skip bins, as long as they have been degassed and the doors are removed. However it is better to take white goods to a dedicated recycling facility, as they take up significant room in a skip bin. Plasterboard is also prohibited, as it can contaminate the entire contents of the skip. Sometimes, with permission, small quantities of plasterboard are permitted by skip hire companies if placed on top of the skip and wrapped to prevent contamination. In the event that the waste management company discovers prohibited waste in a skip bin that has been collected, the bin may be taken back to the customer for them to sort out the waste, or the hazardous waste may be disposed of at a different, specialist site at the cost of the customer. The origins of calling a rubbish cart a skip (most often found in Australia, New Zealand and the UK) come from the word , used to refer to a basket.[1] Skep itself comes from the Late Old English English, Old (ca.450-1100);: sceppe, from the Old Norse Norse, Old: skeppa 'basket'.[2] While the first recorded use of a rubbish skip dates back to 1922, the practice of using skips to dispose of residential and commercial waste became mainstream over the following century, culminating in the modern skip waste disposal system that is used today.Domestic skip sizes and uses
3 m3
5 m3
6 m3Prohibited waste
Etymology
See also
Notes and References