SiC–SiC matrix composite is a particular type of ceramic matrix composite (CMC) which have been accumulating interest mainly as high temperature materials for use in applications such as gas turbines, as an alternative to metallic alloys. CMCs are generally a system of materials that are made up of ceramic fibers or particles that lie in a ceramic matrix phase. In this case, a SiC/SiC composite is made by having a SiC (silicon carbide) matrix phase and a fiber phase incorporated together by different processing methods. Outstanding properties of SiC/SiC composites include high thermal, mechanical, and chemical stability while also providing high strength to weight ratio.[1]
SiC/SiC composites are mainly processed through three different methods. However, these processing methods are often subjected to variations in order to create the desired structure or property:[1]
Mechanical properties of CMCs, including SiC–SiC composites can vary depending on the properties of their various components, namely, the fiber, matrix, and interphases. For example, the size, composition, crystallinity, or alignment of the fibers will dictate the properties of the composite. The interplay between matrix microcracking and fiber-matrix debonding often dominates the failure mechanism of SiC/SiC composites. This results in SiC/SiC composites having non-brittle behavior despite being fully ceramic. Additionally, creep rates at high temperatures are also extremely low, but still dependent on its various constituents.[1] [6]
SiC–SiC composites have a relatively high thermal conductivity and can operate at very high temperatures due to their inherently high creep and oxidation resistance. Residual porosity and stoichiometry of the material can vary its thermal conductivity, with increasing porosity leading to lower thermal conductivity and presence of Si–O–C phase also leading to lower thermal conductivity. In general, a typical well processed SiC–SiC composite can achieve a thermal conductivity of around 30 W/m-K at 1000abbr=NaNabbr=.[1]
Since SiC–SiC composites are generally sought for in high temperature applications, their oxidation resistance is of high importance. The oxidation mechanism for SiC–SiC composites vary depending on the temperature range, with operation in the higher temperature range (>1000 °C) being more beneficial than at lower temperatures (<1000 °C). In the former case, passive oxidation generates a protective oxide layer wheres in the latter case, oxidation degrades the fiber-matrix interface. Nonetheless, oxidation is an issue and environmental barrier coatings are being investigated to address this issue.[1]
Silicon carbide (SiC) ceramic matrix composites (CMCs) are a specific application ofengineering ceramic materials used to enhance aerospace applications such as turbine enginecomponents and thermal protection systems. Due to exhibiting high temperature capabilities, lowdensity, and resistance to oxidation and corrosion, SiC/SiC CMCs are largely used in aerospaceapplications. The use of SiC/SiC CMCs on rotating engine components reduce the complexity ofdesign and engine structure weight, providing improved performance and fuel emissions. Theimplementation of SiC/SiC ceramic matrix components will improve aircraft and space vehicleperformance and fuel efficiency, reducing additional harm to the environment in a cost-effectivemanner.
Additional applications of SiC/SiC CMCs include combustion and turbine section components ofaero-propulsion and land-based gas turbine engines, thermal protection systems, thruster nozzles,reusable rocket nozzles, and turbopump components for space vehicles.
With the development and implementation of future SiC/SiC CMCs, the SiC fiber creep andrupture properties must be examined. Defects such as grain size, impurities, porosity, and surfacetoughness all contribute to SiC fiber creep and rupture. Due to relatively low toughness, lowdamage tolerance, and large variability in mechanical properties, CMCs have been limited to lesscritical components. In the future, the implementation of greater SiC/SiC CMCs into aerospaceapplications is hindered by lack of understanding of ceramic material characteristics,degradation, mechanisms, and interactions to prevent component life and broaden componentdesign.