In an electromechanical generator,[1] the short circuit ratio is the ratio of field current required to produce rated armature voltage at the open circuit to the field current required to produce the rated armature current at short circuit.[1] [2] This ratio can also be expressed as an inverse of the saturated direct-axis synchronous reactance (in p.u.):
SCR=
| 1 | |
| XS |
Higher SCR requires lower reactance
XS
Both high and low levels of SCR have their benefits:
Therefore, in practice the design of a generator is seeking an SCR that balances benefits and drawbacks for a particular application.
The larger the SCR, the smaller is alternator reactance (Xd) and inductance Ld. This is the result of larger air gaps in generator design (As in Hydro generators or Salient Pole Machines). It results into Machine loosely coupled to the grid, and its response will be slow. This increases the machines’ stability while operating on the grid, but simultaneously will increase the short circuit current delivery capability of the machine (higher short circuit current) and subsequently larger machine size and its cost. Typical values of SCR for Hydro alternators may be in the range of 1 to 1.5.
Conversely, the smaller the SCR, the larger is alternator's reactance (Xd), the larger is Ld. It results from small air gaps in machine design (As in Turbo generators or Cylindrical rotor Machines). Machines are tightly coupled to the grid, and their response will be fast. This reduces the machine's stability while operating on the grid and will reduce the short circuit current delivery capability (lower short circuit current), smaller machine size, and lower cost subsequently. Typical values of SCR for turbo alternators may be in the range of 0.45 to 0.9.