Serpentine Dam (Tasmania) Explained

Serpentine Dam
Location Map:Australia Tasmania
Location Map Size:280
Location Map Caption:Location of the Serpentine Dam in Tasmania
Coordinates:-42.7764°N 145.9822°W
Country:Australia
Location:South West Tasmania
Purpose:P
Status:O
Owner:Hydro Tasmania
Dam Type:E
Dam Crosses:Serpentine River
Dam Height:38m (125feet)
Dam Length:134m (440feet)
Dam Volume:127e3m3
Spillway Count:1
Spillway Type:Controlled
Spillway Capacity:242m3/s
Res Name:Lake Pedder
Res Capacity Total:2937930ML
Res Catchment:734km2
Res Surface:2420NaN0
Res Max Depth:430NaN0

The Serpentine Dam is a rockfill embankment dam with a concrete face and a controlled spillway across the Serpentine River, located in the South West region of Tasmania, Australia.

The impounded reservoir, also formed with the Edgar Dam and the Scotts Peak Dam, is called Lake Pedder which flooded Lake Edgar, a naturally forming fault scarp pond. The dam was constructed in 1971 by the Hydro Electric Corporation (TAS) as part of the Gordon River Power Development Scheme for the purpose of generating hydro-electric power via the conventional Gordon Power Station. Water from Lake Pedder is diverted to Lake Gordon (formed by the Gordon Dam) via the McPartlan Pass Canal.[1] [2] [3]

Location and features

The Serpentine Dam, together with the Edgar Dam and the Scotts Peak Dam, are three major dams that form the headwaters for the Gordon River Power Development Scheme. The dam is located near Lake Pedder's most northwesterly point where the Serpentine River descends from the Frankland Range into what is now known as the Pedder Reach. At the southern end of the Lake Pedder, the Scotts Peak Dam impounds the upper reaches of the Huon River. The Edgar Dam forms a saddle dam at Lake Pedder's most easterly point. The water in Lake Pedder provides around 40% of the water used in the Gordon Power Station. The water flows to Lake Gordon via McPartlan Canal.[1] Water from Lake Gordon then exits through the Gordon Power Station releasing via the tailrace into the Gordon River.

Built on a foundation of rock and soil, the Serpentine Dam wall was constructed with of rockfill and faced with concrete. The dam wall is high and long. At 100% capacity the dam wall holds back of water. The surface area of Lake Pedder is and the catchment area is . The dam wall has a controlled spillway capable of discharging .[4]

This non-hydroelectric dam helps retain water in the new impoundment, which then flows to Lake Gordon via the McPartlans Pass Canal at .

The construction of the Serpentine Dam resulted in the loss of one of the significant sub-populations of the endangered Centrolepis pedderensis (a small herbaceous plant), while the nearby Gordon Dam caused the loss of another. It is now only known to exist in one location on the Frankland Range. One sub-population existed along the Serpentine River and is now inundated as a direct cause of the creation of this dam.[5]

See also

Notes and References

  1. Web site: Gordon - Pedder . Energy: Our power stations . . 21 June 2015 .
  2. Web site: Scotts Peak Dam, Tasmania . Submission for an Historic Engineering Marker . . April 2000 . 1 July 2015 .
  3. Web site: Gordon River - more power to Tasmania . https://web.archive.org/web/20110706113332/http://www.wheretostay.com.au/article.htm?qa=augordonriver . dead . 6 July 2011 . www.wheretostay.com.au . 29 November 2009 .
  4. Web site: Register of Large Dams in Australia . Excel (requires download) . . 2012 . 28 June 2015 . Dams information.
  5. Web site: Centrolepis pedderensis — Pedder Centrolepis . . . 29 November 2009 .