| Seafarer 22 | |
| Insignia: | File:Seafarer 22 sail badge.png |
| Insignia Size: | 80px |
| Designer: | McCurdy & Rhodes |
| Location: | United States |
| Year: | 1976 |
| Builder: | Seafarer Yachts |
| Role: | Cruiser |
| Draft: | 2.83feet |
| Displacement: | 23000NaN0 |
| Hull Type: | monohull |
| Construction: | fiberglass with balsa-cored deck |
| Loa: | 21.67feet |
| Lwl: | 18.33feet |
| Beam: | 7.42feet |
| Engine: | outboard motor |
| Keel Type: | fin keel |
| Ballast: | 7800NaN0 |
| Rudder Type: | skeg-mounted rudder |
| Rig Type: | Bermuda rig |
| I: | 26feet |
| J: | 9.25feet |
| P: | 21.75feet |
| E: | 8feet |
| Sailplan: | masthead sloop |
| Sailarea Main: | 87square feet |
| Sailarea Headsail: | 120.25square feet |
| Sailarea Total: | 207.25square feet |
| Phrf: | 270 |
The Seafarer 22 is an American trailerable sailboat that was designed by McCurdy & Rhodes as a cruiser and first built in 1976.[1] [2] [3]
The design was built by Seafarer Yachts in Huntington, New York in the United States, starting in 1976, but it is now out of production.[1] [3] [4]
The Seafarer 22 is a recreational keelboat, built predominantly of fiberglass with a balsa-cored deck. It has a masthead sloop rig, a raked stem, a slightly reverse transom, a skeg-mounted rudder controlled by a tiller and a fixed fin or optional shoal draft keel. It displaces 23000NaN0 and carries 7800NaN0 of lead ballast.[1] [3]
The boat has a draft of 2.83feet with the standard keel and 2.08feet with the optional shoal draft keel. The shoal draft keel model also had a transom-mounted, vertically lifting rudder.[1] [3]
There were also two deck designs available for the same hull, the earlier production "Futura" deck, which was more streamlined and had only one port per side or the later "Standard" deck with two cabin ports per side or.[1] [3]
The boat is normally fitted with a small 3to outboard motor for docking and maneuvering.[1] [3]
The design has sleeping accommodation for four people, with a double "V"-berth in the bow cabin and two straight settee berths in the main cabin around a folding table. The galley is located on the port side just aft of the bow cabin. The galley is equipped with a sink. The head is located in the bow cabin under the "V"-berth. Cabin headroom is 570NaN0 and the fresh water tank has a capacity of .[1] [3]
The design has a PHRF racing average handicap of 270 and a hull speed of 5.7kn.[3]
In a 2010 review Steve Henkel wrote, "the first of a long line of McCurdy & Rhodes designs for Seafarer Fiberglass Yachts of Huntington, NY ... This model featured a streamlined forward deck and only one portlight on each side. Later versions of the '22' used a new deck molding, with extra ports that give more light below, and also offered a choice of two keels, either the 2' 10" so-called 'high performance' keel ... designed primarily for better stability and speed, or a 2' 1" keel for easier launching and retrieving from a trailer. Best features: The coaming on the early boats ... curled up over the cabin-top to ease attachment of a weather-tight dodger, a great convenience when cruising in rainy weather. Worst features: The shoal-keel version's performance will not satisfy most sailors, and the smaller, shallower rudder that is needed to match the shoal keel will not perform as well either. We recommend sticking with the 'high performance' version—which can't be expected to match her comp[etitor]s upwind pointing ability, since she's just not deep enough. The skeg-mounted rudder in both early and late versions has been known to develop problems at the gudgeons. In the early one-port-per-side boats, some owners have sawn holes for new ports to secure additional light below."[3]
