The Dunn Solar Telescope, also known as the Richard B. Dunn Solar Telescope,[1] is a unique vertical-axis solar telescope that specializes in high-resolution imaging and spectroscopy. It is located at Sacramento Peak in Sunspot, New Mexico. It is the main telescope at the Sunspot Solar Observatory, operated by New Mexico State University in partnership with the National Solar Observatory through funding from the National Science Foundation, the state of New Mexico, and private funds from other partners. The Dunn Solar Telescope helps astrophysicists worldwide better understand the Sun and how it affects Earth.
Completed in 1969, the telescope was upgraded with high-order adaptive optics in 2004 and remains a highly versatile astrophysical observatory that serves as an important test platform for developing new instrumentation and technologies.
The Dunn Solar Telescope specializes in solar high-resolution imaging and spectroscopy. These observations allow solar astronomers worldwide to obtain a better understanding of the Sun. Scientists and engineers use the telescope to investigate a range of solar activities, often in concert with satellites or rocket launches, and to develop new technologies for the 4-meter Daniel K. Inouye Solar Telescope.
The telescope was inaugurated as the world's premier high spatial resolution optical solar telescope in 1969. With a horizontal rotating 40adj=midNaNadj=mid observing platform, such that instruments do not have to be mounted on the telescope itself, the Dunn Solar Telescope continues to offer a versatile, user-friendly setup. It has two high-order adaptive optics benches to compensate for blurring by Earth's atmosphere.
The whole building from top to bottom is a single instrument. Like an iceberg, only a part of the telescope's bulk is visible above ground. More than half the entire building is underground – the tower extends 136feet feet above ground, while the lowest excavated point (the bottom of the sump) is 228feet below ground. Enclosed within the concrete tower is a vertical vacuum tube with 3-foot-thick walls.
The optical path starts at a heliostat on top of the tower. An entrance window at the top of the tower, and two mirrors, reflect sunlight down the vacuum tube to the 64-inch primary mirror, 193feet underground.[2] The primary mirror focuses the light and reflects it back up, where it exits the vacuum tube through six quartz optical windows in the floor of an optical laboratory at ground level.
The telescope's entire optical system – from the top of the tower to the base of its underground portion, plus the 40adj=midNaNadj=mid observing room floor – is contained within the vacuum tube. The optics are evacuated to eliminate distortion due to convection in the telescope that would otherwise be caused by the great heat produced by focusing sunlight.
The interior vacuum tube, which weighs more than 250 tons, is suspended from the top of the tower by a mercury float bearing that contains 10 tons of mercury. This bearing allows the entire vacuum tube to be rotated, compensating for the apparent rotation of the image as the Sun rises into the sky. The bearing, in turn, is hung on three bolts, each only 76mm in diameter. Despite the size and weight, much of the telescope can be controlled and monitored from a single control room, off to one side of the main instrument observing table.
The Dunn Solar Telescope has a rotating optical bench, which can be configured to multiple observing setups, depending on the requirements of the science under study. The four most widely used instruments, often used together in one complex observing setup, are:
The Facility Infrared Spectropolarimeter is a multi-slit spectropolarimeter made specifically for the Dunn Solar Telescope to study magnetism on the solar surface. The instrument samples adjacent slices of the solar surface using four parallel slits to achieve high cadence, diffraction-limited, precision spectropolarimetry. Up to four spectral lines at visible and infrared wavelengths, covering four different heights in the solar atmosphere, can be observed simultaneously. It can be optimized to provide simultaneous spectral coverage at visible (3,500 – 10,000 Å) and infrared (9,000 – 24,000 Å) wavelengths through the use of a unique dual-armed design. It was "designed to capture the Fe I 6302 Å and Fe I 15648 Å or He I 10830 Å lines with maximum efficiency."
The Spectro-Polarimeter for Infrared and Optical Regions performs achromatic lens Stokes polarimetry across several visible and infrared spectral regions. Completed in 2005, it was designed to act as 'experimental oriented' instrument, built with a flexibility to allow for the combination of any many spectral lines, "limited only by practical considerations (e.g., the number of detectors available, space on the optical bench, etc.)".
The Interferometric Bidimensional Spectro-polarimeter (IBIS) is a dual interferometer, imaging spectropolarimeter. It uses a series of precise piezoelectric tuning to rapidly scan selected spectral lines within the 550 and 860 nm range. This creates a time series of high-fidelity imaging, spectroscopy, and polarimetry of the Sun. It has a large circular field-of-view combined with high spectral (R ≥ 200,000), spatial ≃ 0.2″) and temporal resolution (several frames per second).
The Rapid Oscillations in the Solar Atmosphere (ROSA) instrument is a single-controlled system of six imaging fast-readout CCD cameras. The full chip on each camera can be read out 30 frames per second, and all the cameras are triggered from one control system. As such, it provides the ability to image multiple layers of the photosphere and chromosphere simultaneously. At its installation in 2010, it generated up to 12 TB of data per day, making it one of the largest datasets in ground-based solar astronomy at the time.
In addition, some older instruments are available, although these are now rarely used:
A design for a Solar Vacuum Tower Telescope was started by the architect and engineer Charles W. Jones in 1963. Construction on the final building started in 1966 under the U.S. Army Corps of Engineers and ended in 1967, at a cost of about $3 million, with the architectural firm of Roghlin and Baran, Associates. Richard B. Dunn, for whom the instrument was eventually dedicated, wrote an article in Sky & Telescope about the completion of the instrument in 1969. As quoted from the article:"In our design we wanted most of all to eliminate problems of local seeing, which are discussed at every meeting on solar instrumentation. Solar astronomers worry about turbulence caused by the slot in the observatory dome, heating of the dome surfaces, heating of the telescope, local convection, and turbulence within the optical system...In our case, the dome was eliminated. We put a window high up on a 135-foot pyramidal tower and then evacuated the air from the entire telescope inside the tower. The latter reduces the effects of local convection and the vacuum eliminates the internal turbulence and seeing problems. Also, it provides the comfort of a heated observing room [...]"[3]
The tower telescope was originally dedicated on October 15, 1969, and renamed in 1998 after Richard B. Dunn. A plaque at the facility reads:"Named in honor of one of solar astronomy's most creative instrument builders, this vacuum tower telescope is the masterpiece of Richard B. Dunn's long scientific career at Sacramento Peak Observatory (1998). Construction of the vacuum tower used for the DST significantly impacted future solar instruments: So sharp were the images formed from this type of solar telescope, that almost every large solar telescope built since then has been based on the vacuum tower concept."