| Rhombicuboctahedron | |
| Faces: | 8 equilateral triangles 18 squares |
| Edges: | 48 |
| Vertices: | 24 |
| Symmetry: | Octahedral symmetry Oh Pyritohedral symmetry Th |
| Schläfli: | r\begin{Bmatrix}3\ 4\end{Bmatrix} |
| Angle: | square-to-square: 135° square-to-triangle: 144.7° |
| Vertex Figure: | Polyhedron small rhombi 6-8 vertfig.svg |
| Vertex Config: | 24(3 ⋅ 43) |
| Net: | Polyhedron small rhombi 6-8 net.svg |
In geometry, rhombicuboctahedron is an Archimedean solid with 26 faces, consisting of 8 equilateral triangles and 18 squares. It is named by Johannes Kepler in his 1618 Harmonices Mundi, being short for truncated cuboctahedral rhombus, with cuboctahedral rhombus being his name for a rhombic dodecahedron.
The rhombicuboctahedron is an Archimedean solid, and it has Catalan solid as its dual, deltoidal icositetrahedron. The elongated square gyrobicupola is a polyhedron that is similar to a rhombicuboctahedron, but it is not an Archimedean solid because it is not vertex-transitive. The skeleton of a rhombicuboctahedron can be represented as a graph. The rhombicuboctahedron is found in diverse cultures in architecture, toys, the arts, and elsewhere.
The rhombicuboctahedron may be constructed from a cube by drawing a smaller one in the middle of each face, parallel to the cube's edges. After removing the edges of a cube, the squares may be joined by adding more squares adjacent between them, and the corners may be filled by the equilateral triangles. Another way to construct the rhombicuboctahedron is by attaching two regular square cupolas into the bases of a regular octagonal prism.
A rhombicuboctahedron may also be known as an expanded octahedron or expanded cube. This is because the rhombicuboctahedron may also be constructed by separating and pushing away the faces of a cube or a regular octahedron from their centroid (in blue or red, respectively, in the animation), and filling between them with the squares and equilateral triangles. This construction process is known as expansion. By using all of these methods above, the rhombicuboctahedron has 8 equilateral triangles and 16 squares as its faces. Relatedly, the rhombicuboctahedron may also be constructed by cutting all edges and vertices of either cube or a regular octahedron, a process known as rectification.
Cartesian coordinates of a rhombicuboctahedron with an edge length 2 are the permutations of
\left(\pm\left(1+\sqrt{2}\right),\pm1,\pm1\right)
The surface area of a rhombicuboctahedron
A
V
a
The optimal packing fraction of rhombicuboctahedra is given byIt was noticed that this optimal value is obtained in a Bravais lattice by . Since the rhombicuboctahedron is contained in a rhombic dodecahedron whose inscribed sphere is identical to its inscribed sphere, the value of the optimal packing fraction is a corollary of the Kepler conjecture: it can be achieved by putting a rhombicuboctahedron in each cell of the rhombic dodecahedral honeycomb, and it cannot be surpassed, since otherwise the optimal packing density of spheres could be surpassed by putting a sphere in each rhombicuboctahedron of the hypothetical packing which surpasses it.
The dihedral angle of a rhombicuboctahedron can be determined by adding the dihedral angle of a square cupola and an octagonal prism:
A rhombicuboctahedron has the Rupert property, meaning there is a polyhedron with the same or larger size that can pass through its hole.
Oh
Th
The rhombicuboctahedron is an Archimedean solid, meaning it is a highly symmetric and semi-regular polyhedron, and two or more different regular polygonal faces meet in a vertex. The polygonal faces that meet for every vertex are one equilateral triangle and three squares, and the vertex figure is denoted as
3 ⋅ 43
The elongated square gyrobicupola is the only polyhedron resembling the rhombicuboctahedron. The difference is that the elongated square gyrobicupola is constructed by twisting one of its cupolae. It was once considered as the 14th Archimedean solid, until it was discovered that it is not vertex-transitive, categorizing it as the Johnson solid instead.
The skeleton of a rhombicuboctahedron can be described as a graph. It is polyhedral graph, meaning that it is planar and 3-vertex-connected. In other words, the edges of a graph are not crossed while being drawn, and removing any two of its vertices leaves a connected subgraph. It has 24 vertices and 48 edges. It is a quartic, meaning each of its vertices is connected by four vertices. This graph is classified as Archimedean graph, because it resembles the graph of Archimedean solid.
The rhombicuboctahedron appears in the architecture, with an example of the building being the National Library located at Minsk. The Wilson House is another example of the rhombicuboctahedron building, although its module was depicted as a truncated cube in which the edges are all cut off. It was built during the Second World War and Operation Breakthrough in the 1960s.
The rhombicuboctahedron may also be found in toys. For example, the lines along which a Rubik's Cube can be turned are, projected onto a sphere, similar, topologically identical, to a rhombicuboctahedron's edges. Variants using the Rubik's Cube mechanism have been produced, which closely resemble the rhombicuboctahedron. During the Rubik's Cube craze of the 1980s, at least two twisty puzzles sold had the form of a rhombicuboctahedron (the mechanism was similar to that of a Rubik's Cube)[1] [2] Another example may be found in dice from Corfe Castle, each of which square faces have marks of pairs of letters and pips.
The rhombicuboctahedron may also appear in art. An example is the 1495 Portrait of Luca Pacioli, traditionally attributed to Jacopo de' Barbari, which includes a glass rhombicuboctahedron half-filled with water, which may have been painted by Leonardo da Vinci.[3] The first printed version of the rhombicuboctahedron was by Leonardo and appeared in Pacioli's Divina proportione (1509).