| Proteus Airlines Flight 706 | |
| Occurrence Type: | Accident |
| Summary: | Mid-air collision |
| Site: | Quiberon Bay |
| Total Fatalities: | 15 |
| Total Survivors: | 0 |
| Coordinates: | 47.5044°N -2.9892°W |
| Date: | July 30, 1998 |
| Plane1 Occupants: | 14 |
| Plane1 Passengers: | 12 |
| Plane1 Crew: | 2 |
| Plane1 Fatalities: | 14 |
| Plane1 Survivors: | 0 |
| Plane1 Type: | Beechcraft 1900D |
| Plane1 Image: | F-GRPM B.1900D Proteus ZRH 27AUG99 (6928130883).jpg |
| Plane1 Caption: | A Beechcraft 1900D of Proteus Airlines, similar to the accident aircraft |
| Plane1 Operator: | Proteus Airlines |
| Plane1 Iata: | YS706 |
| Plane1 Icao: | PRB706 |
| Plane1 Callsign: | PROTEUS 706 |
| Plane1 Tailnum: | F-GSJM |
| Plane1 Origin: | Lyon Satolas Airport Lyon, France |
| Plane1 Destination: | Lorient-Lann Bihoué Airport Lorient, France |
| Plane2 Occupants: | 1 |
| Plane2 Crew: | 1 |
| Plane2 Fatalities: | 1 |
| Plane2 Survivors: | 0 |
| Plane2 Type: | Cessna 177RG Cardinal |
| Plane2 Image: | Cessna 177RG.jpg |
| Plane2 Caption: | A Cessna 177RG Cardinal, similar to the accident aircraft |
| Plane2 Operator: | Private |
| Plane2 Tailnum: | F-GAJE |
| Plane2 Origin: | Vannes Airport Meucon, France |
Proteus Airlines Flight 706 was a scheduled commuter flight from Lyon, France to Lorient, France. On July 30, 1998, the Beechcraft 1900D operating the flight collided in mid-air with a Cessna 177 over Quiberon Bay, Brittany. Both aircraft crashed in the sea, killing all 15 occupants on both planes.
Flight 706 took off from Lyon–Saint-Exupéry at 14:21 local time (12:21 UTC) on a flight to Lorient Lann-Bihoué airport. About seventy minutes into the flight, the crew made a request to the Lorient approach controller to deviate from their route slightly to the west to Quiberon Bay.[1] The reason for this detour was to give the passengers and crew a view of the SS Norway (previously named SS France), at that time the longest ocean liner ever built in France. Later examinations of the 1900D's cockpit voice recorder revealed that a passenger made his way to the cockpit and told the pilot and co-pilot of the presence of the Norway nearby, then suggested that the crew fly the aircraft closer to the ship.[2] At the time of this request, a Cessna 177 registered F-GAJE belonging to a local flying club took off from the airfield at Vannes for a local flight to Quiberon.[3]
At 15:53, after first being cleared to descend to 3700feet over the bay, the Proteus crew contacted air traffic control again and cancelled their flight plan to operate under instrument flight rules, switching to visual flight rules; they then put the 1900D into a descent from 2500feet to 2000feet while making a 360° turn around the ship.[2] At 15:56, the pilot of the Cessna contacted the flight information service at Quiberon as he passed Larmor-Baden and informed them of his intent to descend from 3000feet to 1500feet.[2] At 15:57, the Proteus crew announced to the Lorient approach controller that they had reached the end of their 360° turn and asked to take a direct course for Lorient.[2] After they received confirmation of this request at 15:58, the Proteus crew's aircraft collided with the Cessna. The cockpit voice recording ended at the moment of collision, and the flight data recording ended two seconds later; in those two seconds, the airplane rolled from 7.1 to 56 degrees left and pitched down 95 degrees.[2] Both aircraft immediately fell to the water, killing all 14 passengers and crew on board the Beechcraft, as well as the sole occupant of the 177.[4]
The investigation found that the Cessna's transponder had not been switched on.[2] In documentation published by the Aeronautical Information Service in 1997 and 1998 and probably used by the pilot of the Cessna, the use of a transponder while operating under visual flight rules could be interpreted as optional.[2] As a result of the transponder being off, the Cessna was not depicted on the radar screen of the Lorient approach controller and its traffic information could not be relayed to the crew of the Beechcraft.[2] In communicating with an AFIS controller at Quiberon, the pilot of the Cessna was likewise not informed of the presence of the Beechcraft.[2] While a traffic collision avoidance system (TCAS) system on the Beechcraft would not have prevented the accident without the Cessna's transponder operating, the report also noted that the BF Goodrich TCAS installed in the Beechcraft at the factory had been removed due to not yet being approved for operation in France. Had the Cessna's transponder not been turned off and the Beechcraft's TCAS not been uninstalled, a pilot with expected reaction time would likely have avoided the collision by about 300 feet.[2]
The investigation also revealed that the organization of activity in the Beechcraft's cockpit as well as its ergonomics during the left-hand 360° turn did not allow for effective monitoring during the merger of the two aircraft, particularly to the outside of the turn, placing the Cessna in the Beechcraft's blind spot.[2] The position of the sun as well as the configuration of the Cessna's fuselage and nose cowling were thought to have impeded the view of the Cessna's pilot in the moments just prior to the collision.[2]
Following this accident, the BEA recommended that pilots should only cancel instrument flight rules flight plans in cases of necessity.[2]
This accident was featured in the 16th season of the Canadian TV series Mayday. It aired on 5 July 2016 and is titled Deadly Detour.[5]