Pillau-class cruiser explained

The German: Pillau class of light cruisers was a pair of ships built in Germany just before the start of World War I. The class consisted of and . The ships were initially ordered for the Imperial Russian Navy in 1912, and were built by the Schichau-Werke shipyard in Danzig. After the outbreak of World War I, however, the German German: [[Kaiserliche Marine]] (Imperial Navy) confiscated the ships before they were completed. The ships were similar in design to other German light cruisers, although they lacked an armored belt. They were the first German light cruisers to be equipped with 15 cm SK L/45 guns, of which they carried eight. The two ships had a top speed of .

German: Pillau and German: Elbing saw extensive service with the German High Seas Fleet. German: Pillau participated in the Battle of the Gulf of Riga in August 1915, and German: Elbing took part in the bombardment of Yarmouth and Lowestoft in April 1916. The following month, both ships were heavily engaged in the Battle of Jutland on 31 May  - 1 June; there, German: Elbing scored the first hit of either side in the battle. German: Elbing was accidentally rammed and immobilized by the German battleship in the confused night fighting, and her crew were ultimately forced to scuttle her. German: Pillau continued to serve with the fleet until the end of the war. After the German defeat, she was ceded to Italy as a war prize and renamed Italian: Bari. She served in the Italian: [[Regia Marina]] (Royal Navy) until June 1943, when she was sunk in Livorno by USAAF bombers, and eventually broken up for scrap in 1948.

Design

In 1912, the Russian Navy sought builders for a pair of light cruisers; the German: [[Schichau-Werke]] shipyard in Danzig won the contract. The two ships were originally ordered by the Russian Navy as Russian: Maraviev Amurskyy and Russian: Admiral Nevelskoy from the German: Schichau-Werke that year. The two ships were laid down in 1913; Russian: Maraviev Amurskyy was launched on 11 April 1914, after which fitting-out work commenced. Both ships were requisitioned by the German Navy on 5 August 1914, and were renamed German: Pillau and German: Elbing, respectively. German: Elbing was launched on 21 November 1914. German: Pillau and German: Elbing were commissioned into the High Seas Fleet on 14 December 1914 and 4 September 1915, respectively.

General characteristics and machinery

The German: Pillau class ships were 134.3m (440.6feet) long at the waterline and 135.3m (443.9feet) long overall They had a beam of 13.6m (44.6feet) and a draft of 5.98m (19.62feet) forward and 5.31m (17.42feet) aft. They displaced 4390sp=usNaNsp=us as designed and 5252t at full load. The ships' hulls were constructed with transverse and longitudinal steel frames. The hulls were divided into sixteen watertight compartments and had a double bottom that extended for 51 percent of the length of the hull.

The ships had a crew of twenty-one officers and 421 enlisted men. They carried a number of smaller boats, including one picket boat, one barge, two yawls, and two dinghies. They were good sea boats, but were fairly stiff and suffered from severe roll. The cruisers were maneuverable, but were slow going into a turn. Steering was controlled by a single large rudder. They lost speed only slightly in a head sea, but lost up to sixty percent in hard turns.

Their propulsion system consisted of two sets of Marine steam turbines driving two 3.5m (11.5feet) propellers. They were designed to give 30000shp. These were powered by six coal-fired Yarrow water-tube boilers, and four oil-fired Yarrow boilers, trunked into three funnels on the centerline. These gave the ships a top speed of . The two ships carried 620MT of coal, and an additional 580MT of oil that gave them a range of approximately 4300nmi at . The two ships each had three turbo-generators that provided a combined electrical output of at 220 Volts.

Armament and armor

As designed, the ships would have mounted eight 13cm (05inches) L/55 quick-firing guns and four 6.3cm (02.5inches) L/38 guns of Russian design. After they were seized by the German Navy, the planned armament was revised to be standardized with new German cruisers. The standard SK L/45 gun used on previous German cruisers was considered, but abandoned in favor of a larger weapon. As completed, the ships were armed with eight SK L/45 guns in single pedestal mounts. Two were placed side by side forward on the forecastle, four were located amidships, two on either side, and two were side by side aft. They were the first German light cruisers to mount the 15 cm gun. These guns had a range of 17600m (57,700feet) and were supplied with a total of 1,024 rounds of ammunition. German: Pillau and German: Elbing also carried four SK L/55 anti-aircraft guns, though these were replaced with a pair of two 8.8sp=usNaNsp=us SK L/45 anti-aircraft guns. They were also equipped with a pair of 50cm (20inches) torpedo tubes mounted on the deck. The ships could also carry 120 mines.

Since they had been ordered and designed for the Russian Navy, the ships did not possess a waterline armored belt like contemporary German designs. The conning tower had thick sides and a thick roof. The deck was covered with 80mm thick armor plate forward, which was reduced to 20mm aft. Sloping armor 40mm thick provided a measure of protection on the upper portion of the ships' sides. The main battery guns were equipped with 50 mm thick gun shields.

Service history

Pillau

See main article: SMS Pillau.

German: Pillau spent the majority of her career in II Scouting Group, and saw service in both the Baltic and North Seas. In August 1915, she participated in the Battle of the Gulf of Riga against the Russian Navy, and on 31 May – 1 June 1916, she saw significant action at the Battle of Jutland. She was hit by a large-caliber shell once in the engagement, but suffered only moderate damage. She assisted the badly damaged battlecruiser reach port on 2 June after the conclusion of the battle. She also took part in the Second Battle of Heligoland Bight, though was not damaged in the engagement. German: Pillau was assigned to the planned, final operation of the High Seas Fleet in the closing weeks of the war, but a large scale mutiny in the fleet forced it to be canceled.

After the end of the war, German: Pillau was ceded to Italy as a war prize in 1920. Renamed Italian: Bari, she was commissioned in the German: [[Regia Marina]] (Royal Navy) in January 1924. She was modified and rebuilt several times over the next two decades. In the early years of World War II, she provided gunfire support to Italian troops in several engagements in the Mediterranean. In 1943, she was slated to become an anti-aircraft defense ship, but while awaiting conversion, she was sunk by USAAF bombers in Livorno in June 1943. The wreck was partially scrapped by the Germans in 1944, and ultimately raised for scrapping in January 1948.

Elbing

See main article: SMS Elbing.

German: Elbing participated in only two major operations during her career. The first, the bombardment of Yarmouth and Lowestoft, occurred in April 1916; there, she briefly engaged the British Harwich Force. A month later, she took part in the Battle of Jutland, where she scored the first hit of the engagement. She was heavily engaged in the confused fighting on the night of 31 May – 1 June, and shortly after midnight she was accidentally rammed by the battleship, which tore a hole in the ship's hull. Flooding disabled the ship's engines and electrical generators, rendering her immobilized and without power. At around 02:00, a German torpedo boat took off most of her crew, and an hour later the remaining men scuttled the ship; they escaped in the ship's cutter and were later picked up by a Dutch steamer.

References

Further reading