Photoelectric flame photometer explained

Flame photometry is a type of atomic emission spectroscopy. It is also known as flame emission spectroscopy.[1] [2] A photoelectric flame photometer is an instrument used in inorganic chemical analysis to determine the concentration of certain metal ions, among them sodium, potassium, lithium, and calcium.[3] Group 1 (alkali metals) and Group 2 (alkaline earth metals) are quite sensitive to flame photometry due to their low excitation energies.

In principle, it is a controlled flame test with the intensity of the flame color quantified by photoelectric circuitry. The intensity of the color will depend on the energy that had been absorbed by the atoms that was sufficient to vaporise them. The sample is introduced to the flame at a constant rate. Filters select which colours the photometer detects and exclude the influence of other ions. Before use, the device requires calibration with a series of standard solutions of the ion to be tested.

Flame photometry is crude but inexpensive compared to flame emission spectroscopy or ICP-AES, where the emitted light is analyzed with a monochromator. Its status is similar to that of the colorimeter (which uses filters) compared to the spectrophotometer (which uses a monochromator). It also has the range of metals that could be analysed and the limit of detection are also considered

Notes and References

  1. Web site: Flame Photometer: Principle, Working Procedure and Applications Study&Score . 2023-11-19 . www.studyandscore.com.
  2. Web site: Flame Photometry (Theory) : Inorganic Chemistry Virtual Lab : Chemical Sciences : Amrita Vishwa Vidyapeetham Virtual Lab . 2023-11-19 . vlab.amrita.edu.
  3. Domingo . W. R. . Klyne . W. . 1949 . A photoelectric flame photometer . The Biochemical Journal . 45 . 4 . 400–408 . 0264-6021 . 1275017 . 15394430.