Petroleum production in Canada is a major industry which is important to the overall economy of North America. Canada has the third largest oil reserves in the world and is the world's fourth largest oil producer and fourth largest oil exporter. In 2019 it produced an average of 4.7Moilbbl/d of crude oil and equivalent. Of that amount, 64% was upgraded from unconventional oil sands, and the remainder light crude oil, heavy crude oil and natural-gas condensate. Most of the Canadian petroleum production is exported, approximately 3.8Moilbbl/d in 2019, with 98% of the exports going to the United States.[1] Canada is by far the largest single source of oil imports to the United States, providing 43% of US crude oil imports in 2015.[2]
The petroleum industry in Canada is also referred to as the "Canadian Oil Patch"; the term refers especially to upstream operations (exploration and production of oil and gas), and to a lesser degree to downstream operations (refining, distribution, and selling of oil and gas products). In 2005, almost 25,000 new oil wells were spudded (drilled) in Canada. Daily, over 100 new wells are spudded in the province of Alberta alone.[3] Although Canada is one of the largest oil producers and exporters in the world, it also imports significant amounts of oil into its eastern provinces since its oil pipelines do not extend all the way across the country and many of its oil refineries cannot handle the types of oil its oil fields produce. In 2017 Canada imported 405,700 bbl/day (barrels per day) and exported 1,115,000 bbl/day of refined petroleum products.[4] [5]
See main article: History of the petroleum industry in Canada. The Canadian petroleum industry developed in parallel with that of the United States. The first oil well in Canada was dug by hand (rather than drilled) in 1858 by James Miller Williams near his asphalt plant at Oil Springs, Ontario. At a depth of [6] he struck oil, one year before "Colonel" Edwin Drake drilled the first oil well in the United States.[7] Williams later went on to found "The Canadian Oil Company" which qualified as the world’s first integrated oil company.
Petroleum production in Ontario expanded rapidly, and practically every significant producer became his own refiner. By 1864, 20 refineries were operating in Oil Springs and seven in Petrolia, Ontario. However, Ontario's status as an important oil producer did not last long. By 1880 Canada was a net importer of oil from the United States.
Canada's unique geography, geology, resources and patterns of settlement have been key factors in the history of Canada. The development of the petroleum sector helps illustrate how they have helped make the nation quite distinct from the United States. Unlike the United States, which has a number of different major oil producing regions, the vast majority of Canada's petroleum resources are concentrated in the enormous Western Canadian Sedimentary Basin (WCSB), one of the largest petroleum-containing formations in the world. It underlies 1400000km2 of Western Canada including most or part of four western provinces and one northern territory. Consisting of a massive wedge of sedimentary rock up to 6km (04miles) thick extending from the Rocky Mountains in the west to the Canadian Shield in the east, it is far distant from Canada's east and west coast ports as well as its historical industrial centres. It is also far from American industrial centres. Because of its geographic isolation, the area was settled relatively late in the history of Canada, and its true resource potential was not discovered until after World War II. As a result, Canada built its major manufacturing centres near its historic hydroelectric power sources in Ontario and Quebec, rather than its petroleum resources in Alberta and Saskatchewan. Not knowing about its own potential, Canada began to import the vast majority of its petroleum from other countries as it developed into a modern industrial economy.
The province of Alberta lies at the centre of the WCSB and the formation underlies most of the province. The potential of Alberta as an oil-producing province long went unrecognized because it was geologically quite different from American oil producing regions. The first oil well in western Canada was drilled in southern Alberta in 1902, but did not produce for long and served to mislead geologists about the true nature of Alberta's subsurface geology. The Turner Valley oil field was discovered in 1914, and for a time was the biggest oil field in the British Empire, but again it misled geologists about the nature of Alberta's geology. In Turner Valley, the mistakes oil companies made led to billions of dollars in damage to the oil field by gas flaring which not only burned billions of dollars worth of gas with no immediate market, but destroyed the field's gas drive that enabled the oil to be produced. The gas flares in Turner Valley were visible in the sky from Calgary, 75km (47miles) away. As a result of the highly visible wastage, the Alberta government launched vigorous political and legal attacks on the Canadian Government and the oil companies that continued until 1938 when the province set up the Alberta Petroleum and Natural Gas Conservation Board and imposed strict conservation legislation.
The status of Canada as an oil importer from the US suddenly changed in 1947 when the Leduc No. 1 well was drilled a short distance south of Edmonton. Geologists realized that they had completely misunderstood the geology of Alberta, and the highly prolific Leduc oil field, which has since produced over 50000000m2 of oil was not a unique formation. There were hundreds more Devonian reef formations like it underneath Alberta, many of them full of oil. There was no surface indication of their presence, so they had to be found using reflection seismology. The main problem for oil companies became how to sell all the oil they had found rather than buying oil for their refineries. Pipelines were built from Alberta through the Midwestern United States to Ontario and to the west coast of British Columbia. Exports to the U.S. increased dramatically.
Most of the oil companies exploring for oil in Alberta were of U.S. origin, and at its peak in 1973, over 78 per cent of Canadian oil and gas production was under foreign ownership and over 90 per cent of oil and gas production companies were under foreign control, mostly American. This foreign ownership spurred the National Energy Program under the Trudeau government.[8]
See main article: Canadian petroleum companies.
Although around a dozen companies operate oil refineries in Canada, only three companies – Imperial Oil, Shell Canada and Suncor Energy – operate more than one refinery and market products nationally. Other refiners generally operate a single refinery and market products in a particular region. Regional refiners include North Atlantic Refining in Newfoundland, Irving Oil in New Brunswick, Valero Energy in Quebec, Federated Co-operatives in Saskatchewan, Parkland in British Columbia, and Cenovus Energy in Alberta, BC, and Saskatchewan.[9] While Petro Canada was once owned by the Canadian government, it is now owned by Suncor Energy, which continues to use the Petro Canada label for marketing purposes. In 2007 Canada's three biggest oil companies brought in record profits of $11.75 billion, up 10 percent from $10.72 billion in 2006. Revenues for the Big Three climbed to $80 billion from about $72 billion in 2006. The numbers exclude Shell Canada and ConocoPhillips Canada, two private subsidiaries that produced almost 500,000 barrels per day in 2006.[10]
Approximately 96% of Canadian oil production occurs in three provinces: Alberta, Saskatchewan, and Newfoundland and Labrador. In 2015 Alberta produced 79.2% of Canada's oil, Saskatchewan 13.5%, and the province of Newfoundland and Labrador 4.4%. British Columbia and Manitoba produced about 1% apiece.[11] The four Western Canada provinces of Alberta, British Columbia, Saskatchewan and Manitoba all produce their oil from the vast and oil rich Western Canadian Sedimentary Basin, which is centered on Alberta but extends into the other three Western provinces and into the Northwest Territories. The province of Newfoundland and Labrador produces its oil from offshore drilling on the Grand Banks of Newfoundland in the western Atlantic Ocean.[12]
Alberta is Canada's largest oil producing province, providing 79.2% of Canadian oil production in 2015. This included light crude oil, heavy crude oil, crude bitumen, synthetic crude oil, and natural-gas condensate. In 2015 Alberta produced an average of 492265m3/d of Canada's 621560m3/d of oil and equivalent production.[11] Most of its oil production came from its enormous oil sands deposits, whose production has been steadily rising in recent years. These unconventional deposits give Canada the world's third largest oil reserves, which are rivaled only by similar but even larger oil reserves in Venezuela, and conventional oil reserves in Saudi Arabia. Although Alberta has already produced over 90% of its conventional crude oil reserves, it has produced only 5% of its oil sands, and its remaining oil sands reserves represent 98% of Canada's established oil reserves.[13]
In addition to being the world's largest producer of oil sands bitumen in the world, Alberta is the largest producer of conventional crude oil, synthetic crude, natural gas and natural gas liquids products in Canada.
Alberta's oil sands underlie 142200km2 of land in the Athabasca, Cold Lake and Peace River areas in northern Alberta - a vast area of boreal forest which is larger than England. The Athabasca oil sands is the only large oil field in the world suitable for surface mining, while the Cold Lake oil sands and the Peace River oil sands must be produced by drilling.[14] With the advancement of extraction methods, bitumen and economical synthetic crude are produced at costs nearing that of conventional crude. This technology grew and developed in Alberta. Many companies employ both conventional strip mining and non-conventional methods to extract the bitumen from the Athabasca deposit. About 24e9m3 of the remaining oil sands are considered recoverable at current prices with current technology.[13] The city of Fort McMurray developed nearby to service the oil sands operations, but its remote location in the otherwise uncleared boreal forest became a problem when the entire population of 80,000 had to be evacuated on short notice because of the 2016 Fort McMurray Wildfire which enveloped the city and destroyed over 2,400 homes.[15]
Major oil fields are found in southeast (Brooks, Medicine Hat, Lethbridge), northwest (Grande Prairie, High Level, Rainbow Lake, Zama), central (Caroline, Red Deer), and northeast (heavy crude oil found adjacent to the oil sands) Alberta.
Structural regions include: Foothills, Greater Arch, Deep Basin.
There are five oil sands upgraders in Alberta which convert crude bitumen to synthetic crude oil, some of which also produce refined products such as diesel fuel. These have a combined capacity of 1.3Moilbbl/d of crude bitumen.[16]
Since it is Canada's largest oil producing province, Alberta is the hub of Canadian crude oil pipeline systems. About 415000km (258,000miles) of Canada’s oil and gas pipelines operate solely within Alberta’s boundaries and fall under the jurisdiction of the Alberta Energy Regulator. Pipelines that cross provincial or international borders are regulated by the National Energy Board.[17] Major pipelines carrying oil from Alberta to markets in other provinces and US states include:[18]
There are four oil refineries in Alberta with a combined capacity of over 458200oilbbl/d of crude oil. Most of these are located on what is known as Refinery Row in Strathcona County near Edmonton, Alberta, which supplies products to most of Western Canada. In addition to refined products such as gasoline and diesel fuel, the refineries and upgraders also produce off-gases, which are used as feedstock by nearby petrochemical plants.[16]
Two of the largest producers of petrochemicals in North America are located in central and north central Alberta. In both Red Deer and Edmonton, world class polyethylene and vinyl manufacturers produce products shipped all over the world, and Edmonton's oil refineries provide the raw materials for a large petrochemical industry to the east of Edmonton. There are hundreds of small companies in Alberta dedicated to providing various services to this industry—from drilling to well maintenance, pipeline maintenance to seismic exploration.
While Edmonton (population 972,223 thousand in 2019[20]) is the provincial capital and is considered the pipeline, manufacturing, chemical processing, research and refining centre of the Canadian oil industry, its rival city Calgary (population 1.26 million[20]) is the main oil company head office and financial centre, with more than 960 senior and junior oil company offices. Calgary also has regional offices of all six major Canadian banks, some 4,300 petroleum, energy and related service companies, and 1,300 financial service companies, helping make it the second largest head office city in Canada after Toronto.[21]
Saskatchewan is Canada's second-largest oil-producing province after Alberta, producing about 13.5% of Canada's petroleum in 2015. This included light crude oil, heavy crude oil, and natural-gas condensate. Most of its production is heavy oil but, unlike Alberta, none of Saskatchewan's heavy oil deposits are officially classified as bituminous sands. In 2015 Saskatchewan produced an average of 83814m3/d oil and equivalent production.[11]
All of Saskatchewan's oil is produced from the vast Western Canadian Sedimentary Basin, about 25% of which underlies the province. Lying toward the shallower eastern end of the later the sedimentary basin, Saskatchewan tends to produce more oil and less natural gas than other parts. It has four major oil-producing regions:[23]
There are two heavy oil upgraders in Saskatchewan.[25]
The majority of the province's refining capacity is in a single complex in the provincial capital of Regina:[25]
Oil and gas activity is regulated by the Saskatchewan Industry and Resources (SIR).[26]
Newfoundland and Labrador is Canada's third largest oil producing province, producing about 4.4% of Canada's petroleum in 2015. This consisted almost exclusively of light crude oil produced by offshore oil facilities on the Grand Banks of Newfoundland. In 2015 these offshore fields produced an average of 27373m3/d of light crude oil.[11]
Newfoundland has one oil refinery, the Come By Chance Refinery, which has a capacity of 115000oilbbl/d. The refinery was built before the discovery of oil offshore Newfoundland to process cheap imported oil and sell the products mainly in the United States. Unfortunately the startup of the refinery in 1973 coincided with the 1973 oil crisis which quadrupled the price of the refinery's crude oil supply. This and technical problems caused the refinery to go bankrupt in 1976. It was restarted under new owners in 1986 and has gone through a series of owners until now, when it is operated by North Atlantic Refining Limited.[27] However, despite the fact that major oil fields were subsequently discovered offshore of Newfoundland, the refinery was not designed to process the type of oil they produced, and it did not process any Newfoundland oil at all until 2014. Until then all of Newfoundland's production went to refineries in the United States and elsewhere in Canada, while the refinery imported all its oil from other countries.[28]
British Columbia produced an average of 8643m3/d oil and equivalent in 2015, or about 1.4% of Canada's petroleum. About 38% of this liquids production was light crude oil, but most of it (62%) was natural-gas condensate.[11]
British Columbia's oil fields lie at the gas-prone northwest end of the Western Canadian Sedimentary Basin, and its oil industry is secondary to the larger natural gas industry. Drilling for gas and oil takes place in Peace Country of north-eastern British Columbia, around Fort Nelson (Greater Sierra oil field), Fort St. John (Pink Mountain, Ring Border) and Dawson Creek
Oil and gas activity in BC is regulated by the Oil and Gas Commission (OGC).[29]
BC has only two remaining oil refineries.[9]
There once were four oil refineries in the Vancouver area, but Imperial Oil, Shell Canada, and Petro Canada converted their refineries to product terminals in the 1990s and now supply the BC market from their large refineries near Edmonton, Alberta, which are closer to Canada's oil sands and largest oil fields.[30] Chevron's refinery is at risk of closure due to difficulties in getting oil supply from Alberta via the capacity-limited Trans Mountain Pipeline, its only pipeline link to the rest of Canada.[31]
In June 2016 Chevron put its oil refinery in Burnaby, BC up for sale, along with its fuel distribution network in British Columbia and Alberta. “The company acknowledges these are challenging times and we need to be open to changing market conditions and opportunities as they arise,” a company representative said. The refinery, which started production in 1935, has 430 employees. Chevron's offer to sell follows Imperial Oil's sale of 497 Esso gas stations in B.C. and Alberta. It is unclear what will happen if Chevron fails to sell its BC assets.[32]
Manitoba produced an average of 7283m3/d of light crude oil in 2015, or about 1.2% of Canada's petroleum production.[11]
Manitoba's oil production is in southwest Manitoba along the northeast flank of the Williston Basin, a large geological structural basin which also underlies parts of southern Saskatchewan, North Dakota, South Dakota and Montana. Unlike in Saskatchewan, very little of Manitoba's oil is heavy crude oil.[33]
There are no oil refineries in Manitoba.
The Northwest Territories produced an average of 1587m3/d of light crude oil in 2015, or about 0.2% of Canada's petroleum production.[11] There is an historic large oil field at Norman Wells, which has produced most of its oil since it started producing 1937, and is continuing to produce at low rates. There used to be an oil refinery at Norman Wells, but it was closed in 1996 and all of the oil is now pipelined out to refineries in Alberta.[34]
See also: Petroleum exploration in the Arctic. Extensive drilling was done in the Canadian Arctic during the 1970s and 1980s by such companies as Panarctic Oils Ltd., Petro Canada and Dome Petroleum. After 176 wells were drilled at a cost of billions of dollars, a modest of oil were found. None of the finds were big enough to pay for the multibillion-dollar production and transportation schemes required to bring the oil out, so all the wells which had been drilled were plugged and abandoned.[36] In addition, after the Deepwater Horizon explosion in the Gulf of Mexico in 2010, new rules were introduced which discouraged companies from drilling in the Canadian Arctic offshore.[37]
Ontario produced an average of 157m3/d of light crude oil in 2015, or less than 0.03% of Canada's petroleum production. Onshore production in other provinces east of Ontario was even more insignificant.[11]
Ontario was the centre of the Canadian oil industry in the 19th century. It had the oldest commercial oil well in North America (dug by hand in 1858 at Oil Springs, Ontario, a year before the Drake Well was drilled in Pennsylvania), and having the oldest producing oil field in North America (producing crude oil continuously since 1861). However, it reached its production peak and started to decline more than 100 years ago.[38]
Canada had one of the world’s first oil pipelines in 1862 when a pipeline was built to deliver oil from Petrolia, Ontario to refineries at Sarnia, Ontario. However, Ontario's oil fields began to decline toward the end of the 19th century, and by World War II Canada was importing 90% of its oil. By 1947, only three Canadian crude oil pipelines existed. One was built to handle only Alberta production. A second moved imported crude from coastal Maine to Montreal, while the third brought American oil into Ontario.[39] However, in 1947 the first big oil discovery was made in Alberta when Leduc No. 1 struck oil southwest of central Edmonton, Alberta. It was followed by many even larger discoveries in Alberta, so pipelines were built to take the newly discovered oil to refineries in the American Midwest and from there to refineries in Ontario.[40]
Despite having very little oil production, Eastern Canada has a large number of oil refineries. The ones in Ontario were built close to the historic oil fields of southern Ontario; the ones in provinces to the east were built to process oil imported from other countries. After Leduc No. 1 was discovered in 1947, the much larger oil fields in Alberta began to supply Ontario refineries. After the 1973 oil crisis drastically increased the price of imported oil, the economics of refineries became unfavorable, and many of them closed. In particular, Montreal, which had six oil refineries in 1973, now has only one.[42]
The province of Newfoundland and Labrador is Canada's third largest oil producer with 27373m3/d of light crude oil from its Grand Banks offshore oil fields in 2015, about 4.4% of Canada's petroleum. See the Newfoundland and Labrador section above for details. Most of the other offshore production was in the province of Nova Scotia, which produced 438m3/d of natural gas condensate from its Sable Island offshore natural gas fields in 2015, or about 0.07% of Canada's petroleum.[11]
Broadly speaking Canadian conventional oil production (via standard deep drilling) peaked in the mid-1970s, but East Coast offshore basins being exploited in Atlantic Canada did not peak until 2007 and are still producing at relatively high rates.[43]
Production from the Alberta oil sands is still in its early stages and the province's established bitumen resources will last for generations into the future. The Alberta Energy Regulator estimates that the province has 50abbr=offNaNabbr=off of ultimately recoverable bitumen resources. At the 2014 production rate of 366300sigfig=2NaNsigfig=2, they would last for about 375 years. The AER projects that bitumen production will increase to 641800sigfig=2NaNsigfig=2 by 2024, but at that rate they would still last for about 213 years.[44] Because of the enormous size of the known oil sands deposits, economic, labor, environmental, and government policy considerations are the constraints on production rather than finding new deposits.
In addition, the Alberta Energy Regulator has recently identified over 67e9m3 of unconventional shale oil resources in the province.[44] This volume is larger than the province's oil sands resources, and if developed would give Canada the largest crude oil reserves in the world. However, due to the recent nature of the discoveries there are not yet any plans to develop them.
These oil fields are or were economically important to the Canadian economy:
There are three components of the Canadian petroleum industry: upstream, midstream and downstream.
The upstream oil sector is also commonly known as the exploration and production (E&P) sector.[45] [46] [47]
The upstream sector includes the searching for potential underground or underwater crude oil and natural gas fields, drilling of exploratory wells, and subsequently drilling and operating the wells that recover and bring the crude oil and/or raw natural gas to the surface. With the development of methods for extracting methane from coal seams,[48] there has been a significant shift toward including unconventional gas as a part of the upstream sector, and corresponding developments in liquified natural gas (LNG) processing and transport. The upstream sector of the petroleum industry includes Extraction of petroleum, Oil production plant, Oil refinery and Oil well.
The midstream sector involves the transportation, storage, and wholesale marketing of crude or refined petroleum products. Canada has a large network of pipelines - over 840,000 km - that transport crude oil and natural gas across the country.[49] There are four main pipeline groups: gathering, feeder, transmission, and distribution pipelines. Gathering pipelines transport crude oil and natural gas from wells drilled in the subsurface to oil batteries or natural gas processing facilities. The majority of these pipelines are found in petroleum producing areas in Western Canada.[50] Feeder pipelines move crude oil, natural gas, and natural gas liquids (NGLs) from the batteries, processing facilities, and storage tanks to the long-distance portion of the transportation system: transmission pipelines. These are the major carriers of crude oil, natural gas, and NGLs within provinces and across provincial or international borders, where the products are either sent to refineries or exported to other markets. Finally, distribution pipelines are the conduit for delivering natural gas to downstream customers, such as local utilities, and then further distributed to homes and businesses. If pipelines are near capacity or non-existent in certain areas, crude oil is then transported over land by rail or truck, or over water by marine vessels.
The midstream operations are often taken to include some elements of the upstream and downstream sectors. For example, the midstream sector may include natural gas processing plants which purify the raw natural gas as well as removing and producing elemental sulfur and natural gas liquids (NGL) as finished end-products. Midstream service providers in Canada refer to Barge companies, Railroad companies, Trucking and hauling companies, Pipeline transport companies, Logistics and technology companies, Transloading companies and Terminal developers and operators. Development of the massive oil sand reserves in Alberta would be facilitated by enhancing the North American pipeline network which would transport dilbit to refineries or export facilities.[51]
The downstream sector commonly refers to the refining of petroleum crude oil and the processing and purifying of raw natural gas, as well as the marketing and distribution of products derived from crude oil and natural gas. The downstream sector touches consumers through products such as gasoline or petrol, kerosene, jet fuel, diesel oil, heating oil, fuel oils, lubricants, waxes, asphalt, natural gas, and liquified petroleum gas (LPG) as well as hundreds of petrochemicals. Midstream operations are often included in the downstream category and considered to be a part of the downstream sector.
Crude oil, for example, Western Canadian Select (WCS) is a mixture of many varieties of hydrocarbons and most usually has many sulfur-containing compounds. The refining process converts most of that sulfur into gaseous hydrogen sulfide. Raw natural gas also may contain gaseous hydrogen sulfide and sulfur-containing mercaptans, which are removed in natural gas processing plants before the gas is distributed to consumers. The hydrogen sulfide removed in the refining and processing of crude oil and natural gas is subsequently converted into byproduct elemental sulfur. In fact, the vast majority of the 64,000,000 metric tons of sulfur produced worldwide in 2005 was byproduct sulfur from refineries and natural gas processing plants.[52] [53]
Total Canadian crude oil production, most of which is coming from the Western Canada Sedimentary Basin (WCSB), is forecast to increase from 3.85 million barrels per day (b/d) in 2016 to 5.12 million b/d by 2030.[54] Supply from the Alberta oil sands accounts for most of the growth and is expected to increase from 1.3 million b/d in 2016 to 3.7 million b/d in 2030. Bitumen from the oil sands requires blending with a diluent in order to decrease its viscosity and density so that it can easily flow through pipelines. The addition of diluent will add an estimated 200,000 b/d to the total volumes of crude oil in Canada, for a total of 1.5 million extra barrels per day requiring the creation of additional transport capacity to markets. The current takeaway capacity in Western Canada is tight, as oil producers are beginning to outpace the movement of their products.
Pipeline capacity measurements are complex and subject to variability. They depend on a number of factors, such as the type of product being transported, the products it is mixed with, pressure reductions, maintenance, and pipeline configurations.[55] The major oil pipelines exiting Western Canada have a design transport capacity of 4.0 million b/d. In 2016, however, the pipeline capacity was estimated at 3.9 million b/d,[1] and in 2017 the Canadian Association of Petroleum Producers (CAPP) estimated the pipeline capacity to be 3.3 million b/d. The lack of available pipeline capacity for petroleum forces oil producers to look to alternative transport methods, such as rail.
Crude-by-rail shipments are expected to increase as existing pipelines reach capacity and proposed pipelines experience approval delays.[56] The rail loading capacity for crude in Western Canada is close to 1.2 million b/d, although this varies depending on several factors including the length of the unit trains, size and type of railcars used, and the types of crude oil loaded.[57] Other studies, however, estimate the current rail loading capacity in Western Canada to be 754,000 b/d. The International Energy Agency (IEA) forecasts that crude-by-rail exports will increase from 150,000 b/d in late 2017 to 390,000 b/d in 2019, which is much greater than the record high of 179,000 b/d in 2014.[58] The IEA also warns that rail shipments could reach as high as 590,000 b/d in 2019 unless producers store their produced crude during peak months. The oil industry in the WCSB may need to continue to rely on rail in the forecastable future, as no major new pipeline capacity is expected to be available before 2019.[57] The capacity - to a certain extent - is there, but producers must be willing to pay a premium to move crude by rail.
Canada has had access to western tide water since 1953, with a capacity of roughly 200,000 - 300,000 bpd https://www.transmountain.com/history via the Kinder Morgan Pipeline. There is a myth perpetuated in Canadian media that Canadian WCS oil producers will have better access to “international prices” with greater access to tidewater,[59] however, this claim does not take into account existing access. Shipments to Asia reached their peak in 2012 when the equivalent of nine fully loaded tankers of oil left Vancouver for China. Since then, oil exports to Asia have completely dropped off https://www.portvancouver.com/wp-content/uploads/2016/03/2013-Statistics-Overview.pdf#page=19 to the point at which China imported only 600 barrels of oil in 2017 https://www.portvancouver.com/wp-content/uploads/2018/03/2017-Stats-Overview-1.pdf#page=21. With regard to the claim that Canada does not have access to “international prices”, many economists decry the concept that Canada does have access to the globalized economy as ridiculous and attribute the price differential to the costs of shipping heavy, sour crude thousands of kilometres, compounded by over supply in the destinations able to process aforementioned oil.[60] Due to a doubling of a “production and export” model bet on by the biggest players in the tar sands, producers have recently (2018) encountered an over supply problem, and have sought further government subsidies to lessen the blow of their financial miscalculations earlier this decade. Preferred access ports include the US Gulf ports via the Keystone XL pipeline to the south, the British Columbia Pacific coast in Kitimat via the Enbridge Northern Gateway Pipelines, and the Trans Mountain line to Vancouver, BC. Frustrated by delays in getting approval for Keystone XL, the Enbridge Northern Gateway Pipelines, and the expansion of the existing Trans Mountain line to Vancouver, Alberta has intensified exploration of northern projects, such as building a pipeline to the northern hamlet of Tuktoyatuk near the Beaufort Sea, "to help the province get its oil to tidewater, making it available for export to overseas markets".[61] Under Prime Minister Stephen Harper, the Canadian government spent $9 million by May 2012, and $16.5 million by May 2013, to promote Keystone XL.[62] In the United States, Democrats are concerned that Keystone XL would simply facilitate getting Alberta oil sands products to tidewater for export to China and other countries via the American Gulf Coast of Mexico.
In 2013, Generating for Seven Generations (G7G) and AECOM received $1.8 million in funding from Alberta Energy to study the feasibility of building a railway from northern Alberta to the Port of Valdez, Alaska.[63] The proposed 2,440-km railway would be capable of transporting 1 million to 1.5 million b/d of bitumen and petroleum products, as well as other commodities, to tidewater[64] (avoiding the tanker ban along British Columbia's northern coast). The last leg of the route - Delta Junction through the coastal mountain range to Valdez - was not deemed economically feasible by rail; an alternative, however, may be the transfer of products to the underutilized Trans Alaska Pipeline System (TAPS) to Valdez.
Port Metro Vancouver has a number of petroleum terminals, including Suncor Burrard Terminal in Port Moody, Imperial Oil Ioco Terminal in Burrard Inlet East, and Kinder Morgan Westridge, Shell Canada Shellburn, and Chevron Canada Stanovan terminals in Burnaby.[65]
The public debate surrounding the trade-offs between pipeline and rail transportation has been developing over the past decade as the amount of crude oil transported by rail has increased.[66] [56] It was invigorated in 2013 after the deadly Lac-Mégantic disaster in Quebec when a freight train derailed and spilled 5.56 million litres[67] of crude oil, which resulted in explosions and fires that destroyed much of the town's core. That same year, a train carrying propane and crude derailed near Gainford, Alberta, resulting in two explosions but no injuries or fatalities.[68] These rail accidents, among other examples, have raised concerns that the regulation of rail transport is inadequate for large-scale crude oil shipments. Pipeline failures also occur, for instance, in 2015 a Nexen pipeline ruptured and leaked 5 million litres of crude oil over approximately 16,000 m2 at the company's Long Lake oilsands facility south of Fort McMurray.[69] Although both pipeline and rail transportation are generally quite safe, neither mode is without risk. Numerous studies, however, indicate that pipelines are safer, based on the number of occurrences (accidents and incidents) weighed against the quantity of product transported.[70] [71] Between 2004 and 2015, the likelihood of rail accidents in Canada was 2.6 times greater than for pipelines per thousand barrels of oil equivalents (Mboe).[72] Natural gas products were 4.8 times more likely to have a rail occurrence when compared to similar commodities transported by pipelines. Critics question if pipelines carrying diluted bitumen from Alberta's oil sands are more likely to corrode and cause incidents, but evidence shows the risk of corrosion being no different from that of other crude oils.[73]
A 2017 study by the National Bureau of Economic Research found that contrary to popular belief, the sum of air pollution and greenhouse gas (GHG) emissions costs is substantially larger than accidents and spill costs for both pipelines and rail.[74] For crude oil transported from the North Dakota Bakken Formation, air pollution and greenhouse gas emission costs are substantially larger for rail compared to pipeline. For pipelines and rail, the Pipeline and Hazardous Materials Safety Administration's (PHMSA) central estimate of spill and accident costs is US$62 and US$381 per million-barrel miles transported, respectively.[75] Total GHG and air pollution costs are 8 times higher than accident and spills costs for pipelines (US$531 vs US$62) and 3 times higher for rail (US$1015 vs US$381).
Finally, transporting oil and gas by rail is generally more expensive for producers than transporting it by pipeline. On average, it costs between US$10-$15 per barrel to transport oil and gas by rail compared to $5 a barrel for pipeline.[76] [77] In 2012,16 million barrels of oil were exported to USA by rail. By 2014, that number increased to 59 million barrels.[78] Although quantities decreased to 48 million in 2017, the competitive advantages offered by rail, particularly its access to remote regions as well as lack of regulatory and social challenges compared with building new pipelines, will likely make it a viable transportation method for years to come. Both forms of transportation play a role in moving oil efficiently, but each has its unique trade-offs in terms of the benefits it offers.
See also: Energy policy of Canada.
The jurisdiction over the petroleum industry in Canada, which includes energy policies regulating the petroleum industry, is shared between the federal and provincial and territorial governments. Provincial governments have jurisdiction over the exploration, development, conservation, and management of non-renewable resources such as petroleum products. Federal jurisdiction in energy is primarily concerned with regulation of inter-provincial and international trade (which included pipelines) and commerce, and the management of non-renewable resources such as petroleum products on federal lands.[79]
Oil and Gas Policy and Regulatory Affairs Division (Oil and Gas Division) of Natural Resources Canada (NRCan) provides an annual review of and summaries of trending of crude oil, natural gas and petroleum product industry in Canada and the United States (US)[80]
Until February 2018, the petroleum industry was also regulated by the National Energy Board (NEB), an independent federal regulatory agency. The NEB regulated inter-provincial and international oil and gas pipeline transport and power lines; the export and import of natural gas under long-term licenses and short-term orders, oil exports under long-term licenses and short-term orders (no applications for long-term exports have been filed in recent years), and frontier lands and offshore areas not covered by provincial/federal management agreements.
In 1985, the federal government and the provincial governments in Alberta, British Columbia and Saskatchewan agreed to deregulate the prices of crude oil and natural gas. Offshore oil Atlantic Canada is administered under joint federal and provincial responsibility in Nova Scotia and Newfoundland and Labrador.
There were few regulations in the early years of the petroleum industry. In Turner Valley, Alberta for example, where the first significant field of petroleum was found in 1914, it was common to extract a small amount of petroleum liquids by flaring off about 90% of the natural gas. According to a 2001 report that amount of gas that would have been worth billions. In 1938 the Alberta provincial government responded to the conspicuous and wasteful burning of natural gas. By the time crude oil was discovered in the Turner Valley field, in 1930, most of the free gas cap had been flared off.[81] The Alberta Petroleum and Natural Gas Conservation Board (today known as the Energy Resources Conservation Board) was established in 1931 to initiate conservation measures but by that time the Depression caused a waning of interest in petroleum production in Turner Valley which was revived from 1939 to 1945.[82]