| Bridge Name: | Paul Sauer Bridge |
| Carries: | N2 national highway. |
| Crosses: | Storms River |
| Locale: | Eastern Cape, South Africa |
| Designer: | Riccardo Morandi |
| Design: | Arch bridge |
| Material: | Concrete |
| Height: | 120m (390feet) |
| Mainspan: | 100m (300feet) |
| Begin: | 1953 |
| Complete: | 1956 |
| Cost: | £100,000[1] |
| Coordinates: | -33.9685°N 23.9315°W |
The Paul Sauer Bridge, also known as the Storms River Bridge, is a deck arch bridge over the Storms River in the Eastern Cape of South Africa. The bridge is located on the Garden Route section of National Route 2, between Cape Town and Port Elizabeth. At a maximum height of 120m (390feet) above the Storms River, it was the highest concrete arch in Africa until the Bloukrans Bridge, 216m (709feet), opened on the same road in 1984.
It is named after Paul Sauer.
The bridge was designed by Italian engineer Riccardo Morandi, and constructed by Concor between 1953 and 1956.
It spans 100m (300feet) and sits 120m (390feet) above the river. The main span of the bridge consists of a reinforced concrete arch structure spanning between two concrete abutments located on the western and eastern sides of the river. The deck of the bridge consists of three main spans, the center span between the two abutments and the two approach spans up to the joint above the abutments. The reinforced concrete deck is supported by the arch by means of 12 sets three reinforced concrete columns or struts.
The main arch structure was constructed in a unique fashion: the complete arch was divided into four semi-arches which were built with climbing formwork in an essentially vertical position on opposite sides of the gorge. These were then rotated and lowered into position in pairs to meet at the centre, thus forming the completed arch structure.
The Paul Sauer Bridge was renovated in 1986.