The Parrish Dart started in 1983 as a delta-winged design, but was developed into a canard configuration resembling a Rutan Long-EZ. It features a cantilever mid-wing, a two-seats-in-tandem enclosed cockpit under a bubble canopy, fixed tricycle landing gear main gear with a retractable nosewheel and a single engine in pusher configuration.[2]
The aircraft is made from fiberglass, with the fuselage a fibreglass sandwich and the wings and canard built from fibreglass spars and solid-core fibreglass airfoil shapes cut with a hot-wire foam cutter. Its 231NaN1 span wing has a wing area of 75square feet. The cabin width is 26inches. The cockpit features a side-stick at both seat positions and a right-mounted console. Rudder pedals and brakes are only fitted for the front seat. The acceptable power range is 75to and maximum engine weight is 225lb. The standard engine used is the 750NaN0 Volkswagen air-cooled engine.[2]
The designer estimated the construction time from the supplied plans as 1500 hours.[2]
By 1998 the company reported that one aircraft had been completed and was flying.[2]
In April 2015 only one example, the prototype, was registered in the United States with the Federal Aviation Administration.[3]