An oloid is a three-dimensional curved geometric object that was discovered by Paul Schatz in 1929. It is the convex hull of a skeletal frame made by placing two linked congruent circles in perpendicular planes, so that the center of each circle lies on the edge of the other circle. The distance between the circle centers equals the radius of the circles. One third of each circle's perimeter lies inside the convex hull, so the same shape may be also formed as the convex hull of the two remaining circular arcs each spanning an angle of 4π/3.
The surface area of an oloid is given by:[1]
A=4\pir2
V=
| 2 | |
| 3 |
\left(2E\left(
| 3 | |
| 4 |
\right)+K\left(
| 3 | |
| 4 |
\right)\right)r3
K
E
V ≈ 3.0524184684r3
The surface of the oloid is a developable surface, meaning that patches of the surface can be flattened into a plane. While rolling, it develops its entire surface: every point of the surface of the oloid touches the plane on which it is rolling, at some point during the rolling movement.[1] Unlike most axial symmetric objects (cylinder, sphere etc.), while rolling on a flat surface, its center of mass performs a meander motion rather than a linear one. In each rolling cycle, the distance between the oloid's center of mass and the rolling surface has two minima and two maxima. The difference between the maximum and the minimum height is given by
\Deltah=r\left(
| \sqrt{2 | |
r
At each point during this rolling motion, the oloid touches the plane in a line segment. The length of this segment stays unchanged throughout the motion, and is given by:[1] [3]
l=\sqrt{3}r
Another object called the two circle roller is defined from two perpendicular circles for which the distance between their centers is √2 times their radius, farther apart than the oloid.It can either be formed (like the oloid) as the convex hull of the circles, or by using only the two disks bounded by the two circles. Unlike the oloid its center of gravity stays at a constant distance from the floor, so it rolls more smoothly than the oloid.
In 1979, modern dancer Alan Boeding designed his "Circle Walker" sculpture from two crosswise semicircles, forming a skeletal version of the sphericon, a shape with a similar rolling motion to the oloid. He began dancing with a scaled-up version of the sculpture in 1980 as part of an MFA program in sculpture at Indiana University, and after he joined the MOMIX dance company in 1984 the piece became incorporated into the company's performances. The company's later piece "Dream Catcher" is based around another Boeding sculpture whose linked teardrop shapes incorporate the skeleton and rolling motion of the oloid.
Tobias Langscheid, Tilo Richter (Ed.): Oloid – Form of the Future. With contributions by Dirk Böttcher, Andreas Chiquet, Heinrich Frontzek a.o., niggli Verlag 2023, ISBN 978-3-7212-1025-5
