| Hopper | |
| Designfirm: | Nvidia |
| Manuf1: | TSMC |
| Process: | TSMC N4 |
| Products-Server1: | Tesla H series |
| L1-Cache: | 256KB (per SM) |
| L2-Cache: | 50MB |
| Memory-Support: | HBM3 |
| Pcie-Support: | PCI Express 5.0 |
| Encoders: | NVENC |
| Predecessor: | Ampere |
| Variant: | Ada Lovelace (consumer and professional) |
| Successor: | Blackwell |
Hopper is a graphics processing unit (GPU) microarchitecture developed by Nvidia. It is designed for datacenters and is parallel to Ada Lovelace. It is the latest generation of the line of products formerly branded as Nvidia Tesla and since rebranded as Nvidia Data Center GPUs.
Named for computer scientist and United States Navy rear admiral Grace Hopper, the Hopper architecture was leaked in November 2019 and officially revealed in March 2022. It improves upon its predecessors, the Turing and Ampere microarchitectures, featuring a new streaming multiprocessor and a faster memory subsystem.
The Nvidia Hopper H100 GPU is implemented using the TSMC N4 process with 80 billion transistors. It consists of up to 144 streaming multiprocessors. In SXM5, the Nvidia Hopper H100 offers better performance than PCIe.
The streaming multiprocessors for Hopper improve upon the Turing and Ampere microarchitectures, although the maximum number of concurrent warps per streaming multiprocessor (SM) remains the same between the Ampere and Hopper architectures, 64. The Hopper architecture provides a Tensor Memory Accelerator (TMA), which supports bidirectional asynchronous memory transfer between shared memory and global memory. Under TMA, applications may transfer up to 5D tensors. When writing from shared memory to global memory, elementwise reduction and bitwise operators may be used, avoiding registers and SM instructions while enabling users to write warp specialized codes. TMA is exposed through cuda::memcpy_async
When parallelizing applications, developers can use thread block clusters. Thread blocks may perform atomics in the shared memory of other thread blocks within its cluster, otherwise known as distributed shared memory. Distributed shared memory may be used by an SM simultaneously with L2 cache; when used to communicate data between SMs, this can utilize the combined bandwidth of distributed shared memory and L2. The maximum portable cluster size is 8, although the Nvidia Hopper H100 can support a cluster size of 16 by using the cudaFuncAttributeNonPortableClusterSizeAllowed function, potentially at the cost of reduced number of active blocks. With L2 multicasting and distributed shared memory, the required bandwidth for dynamic random-access memory read and writes is reduced.[1]
Hopper features improved single-precision floating-point format (FP32) throughput with twice as many FP32 operations per cycle per SM than its predecessor. Additionally, the Hopper architecture adds support for new instructions, including the Smith–Waterman algorithm. Like Ampere, TensorFloat-32 (TF-32) arithmetic is supported. The mapping pattern for both architectures is identical.
The Nvidia Hopper H100 supports HBM3 and HBM2e memory up to 80 GB; the HBM3 memory system supports 3 TB/s, an increase of 50% over the Nvidia Ampere A100's 2 TB/s. Across the architecture, the L2 cache capacity and bandwidth were increased.
Hopper allows CUDA compute kernels to utilize automatic inline compression, including in individual memory allocation, which allows accessing memory at higher bandwidth. This feature does not increase the amount of memory available to the application, because the data (and thus it's compressibility) may be changed at any time. The compressor will automatically choose between several compression algorithms.
The Nvidia Hopper H100 increases the capacity of the combined L1 cache, texture cache, and shared memory to 256 KB. Like its predecessors, it combines L1 and texture caches into a unified cache designed to be a coalescing buffer. The attribute cudaFuncAttributePreferredSharedMemoryCarveout may be used to define the carveout of the L1 cache. Hopper introduces enhancements to NVLink through a new generation with faster overall communication bandwidth.
Some CUDA applications may experience interference when performing fence or flush operations due to memory ordering. Because the GPU cannot know which writes are guaranteed and which are visible by chance timing, it may wait on unnecessary memory operations, thus slowing down fence or flush operations. For example, when a kernel performs computations in GPU memory and a parallel kernel performs communications with a peer, the local kernel will flush its writes, resulting in slower NVLink or PCIe writes. In the Hopper architecture, the GPU can reduce the net cast through a fence operation.
max(min(a+b,c),0)
__vimax3_s16x2_relu can be used, a three-way min or max followed by a clamp to zero.[2] Similarly, Hopper speeds up implementations of the Needleman–Wunsch algorithm.[3] The Hopper architecture utilizes a transformer engine.[4]
The SXM5 form factor H100 has a thermal design power (TDP) of 700 watts. With regards to its asynchrony, the Hopper architecture may attain high degrees of utilization and thus may have a better performance-per-watt.
| Grace Hopper GH200 | |
| Codename: | Grace Hopper |
| Created: | 2023 |
| Transistors1: | approx. 200B total[5] --> |
| Compute: | GPU: 132 Hopper SMs CPU: 72 Neoverse V2 cores |
| Shader-Clock: | 1980 MHz |
| Designfirm: | Nvidia |
| Manuf1: | TSMC |
| Process: | TSMC 4N |
| Memory-Support: | GPU: 96 GB HBM3 or 144 GB HBM3e CPU: 480 GB LPDDR5X |
The GH200 combines a Hopper-based H200 GPU with a Grace-based 72-core CPU on a single module. The total power draw of the module is up to 1000 W. CPU and GPU are connected via NVLink, which provides memory coherence between CPU and GPU memory.[6]
In November 2019, a well-known Twitter account posted a tweet revealing that the next architecture after Ampere would be called Hopper, named after computer scientist and United States Navy rear admiral Grace Hopper, one of the first programmers of the Harvard Mark I. The account stated that Hopper would be based on a multi-chip module design, which would result in a yield gain with lower wastage.[7]
During the 2022 Nvidia GTC, Nvidia officially announced Hopper.[8] By 2023, during the AI boom, H100s were in great demand. Larry Ellison of Oracle Corporation said that year that at a dinner with Nvidia CEO Jensen Huang, he and Elon Musk of Tesla, Inc. and xAI "were begging" for H100s, "I guess is the best way to describe it. An hour of sushi and begging".[9]
In January 2024, Raymond James Financial analysts estimated that Nvidia was selling the H100 GPU in the price range of $25,000 to $30,000 each, while on eBay, individual H100s cost over $40,000.[10] As of February 2024, Nvidia was reportedly shipping H100 GPUs to data centers in armored cars.[11]