ntoskrnl.exe (short for Windows NT operating system kernel executable), also known as the kernel image, contains the kernel and executive layers of the Microsoft Windows NT kernel, and is responsible for hardware abstraction, process handling, and memory management. In addition to the kernel and executive layers, it contains the cache manager, security reference monitor, memory manager, scheduler (Dispatcher), and blue screen of death (the prose and portions of the code).[1]
x86 versions of ntoskrnl.exe depend on bootvid.dll
, [[hal.dll]]
and kdcom.dll
(x64 variants of ntoskrnl.exe have these dlls embedded in the kernel to improve performance). However, it is not a native application thus it is not linked against [[Microsoft Windows library files#NTDLL.DLL|ntdll.dll]]
. Instead, ntoskrnl.exe has its own entry point "KiSystemStartup" that calls the architecture-independent kernel initialization function. Because it requires a static copy of the C Runtime objects, the executable is usually about 10 MB in size.
In Windows XP and earlier, the Windows installation source ships four kernel image files to support uniprocessor systems, symmetric multiprocessor (SMP) systems, CPUs with PAE, and CPUs without PAE. Windows setup decides whether the system is uniprocessor or multiprocessor, then, installs both the PAE and non-PAE variants of the kernel image for the decided kind. On a multiprocessor system, Setup installs ntkrnlmp.exe
and ntkrpamp.exe
but renames them to ntoskrnl.exe
and ntkrnlpa.exe
respectively.
Starting with Windows Vista, Microsoft began unifying the kernel images as multi-core CPUs took to the market and PAE became mandatory.
32-bit Windows | |||
Filename | Supports SMP | Supports PAE | |
---|---|---|---|
32-bit kernel | |||
ntoskrnl.exe | |||
ntkrnlmp.exe | |||
ntkrnlpa.exe | |||
ntkrpamp.exe | |||
64-bit kernel (x64 editions) | |||
Filename | Supports SMP | Supports 57 bit VA | |
ntkrnlmp.exe | |||
ntkrla57.exe |
Windows kernel's architecture is structured so that everything is easy to understand. Functions and global variables use the, so called Pascal Case formatting with special (additional) prefixes in their names to differentiate parts of the kernel.
An example is IoCreateDevice and ObReferenceObjectByHandle. Both functions have different prefix names to differentiate critical managers within the kernel code: Io being used for I/O Manager functions and Ob for Object Manager functions.
Variations of these prefixes exist for internal functions that are not being exported by the kernel, such as adding an i after the first letter (e.g., Ki
for “Kernel Internal”) or appending p to the full prefix (e.g., Psp
for “Process Support Internal”).
The following table lists all prefixes.
ExportPrefix | Internal Prefix | Meaning | |
---|---|---|---|
Cc | Ccp | File system cache[2] | |
Cm | Cmp | Configuration Manager, the kernel mode side of Windows Registry | |
Dbg | Dbg | Debugging aid functions, such as a software break point | |
Dbgk | Dbgk | A set of debugging functions that are being exposed to user mode through ntdll.dll | |
Ex | Exp | Windows executive, an "outer layer" of Ntoskrnl.exe | |
FsRtl | FsRtlp | File system runtime library[3] | |
Io | Iop | I/O manager[4] | |
Ke | Ki | Core kernel routines[5] | |
Kx | Interrupt handling, semaphores, spinlocks, multithreading and context switching related functions | ||
Ks | Kernel streaming | ||
Ldr | Ldrp | NT's PE Executables loader | |
Lpc | Lpcp | Local Procedure Call, an internal, undocumented, interprocess or user/kernel message passing mechanism | |
Lsa | Lsap | Local Security Authority | |
Mm | Mi | Memory management | |
Nls | Nls | Nls for Native Language Support (similar to code pages). | |
Ob | Obp | Object Manager | |
Po | Pop | Plug-and-play and power management[6] | |
Ps | Psp | Process and thread management (task management) | |
Rtl | Rtlp | Runtime library, i.e., many utility functions that can be used by native applications, yet don't directly involve kernel support | |
Se | Sep | Security Manager, access token for the Win32 API | |
Vf | Vi | Driver Verifier | |
Zw/Nt | Nt or Zw are system calls declared in ntdll.dll and ntoskrnl.exe . When called from ntdll.dll in user mode, these groups are almost exactly the same; they trap into kernel mode and call the equivalent function in ntoskrnl.exe via the SSDT. When calling the functions directly in ntoskrnl.exe (only possible in kernel mode), the Zw variants ensure kernel mode, whereas the Nt variants do not.[7] |
When the kernel receives control, it gets a struct-type pointer from bootloader. The pointer's destination contains information about the hardware, the path to the Windows Registry file, kernel parameters containing boot preferences or options that change the behavior of the kernel, path of the files loaded by the bootloader (SYSTEM
Registry hive, nls
for character encoding conversion, and vga
font).[8] The definition of this structure can be retrieved by using the kernel debugger or downloading it from the Microsoft symbol database.[9]
In the x86 architecture, the kernel receives the system already in protected mode, with the GDT, IDT and TSS ready. But since it does not know the address of each one, it has to load them one by one to fill the PCR structure.
The main entry point of ntoskrnl.exe performs some system dependent initialization then calls a system independent initialization then enters an idle loop.
Modern operating systems use interrupts instead of I/O port polling to wait for information from devices.
In the x86 architecture, interrupts are handled through the Interrupt Dispatch Table (IDT). When a device triggers an interrupt and the interrupt flag (IF) in the FLAGS register is set, the processor's hardware looks for an interrupt handler in the table entry corresponding to the interrupt number to which in turn has been translated from IRQ by PIC chips, or in more modern hardwares, APIC. Interrupt handlers usually save some subset of the state of registers before handling it and restore them back to their original values when done.
The interrupt table contains handlers for hardware interrupts, software interrupts, and exceptions. For some IA-32 versions of the kernel, one example of such a software interrupt handler (of which there are many) is in its IDT table entry 2E16 (hexadecimal; 46 in decimal), used in assembly language as INT 2EH
for system calls. In the real implementation the entry points to an internal subroutine named (as per symbol information published by Microsoft) KiSystemService
. For newer versions, different mechanisms making use of SYSENTER
instruction and in x86-64 SYSCALL
instruction are used instead.
One notable feature of NT's interrupt handling is that interrupts are usually conditionally masked based on their priority (called "IRQL"), instead of disabling all IRQs via the interrupt flag. This permits various kernel components to carry on critical operations without necessarily blocking services of peripherals and other devices.[10]
The entire physical memory (RAM) address range is broken into many small blocks also called pages, 4KB in size each, and mapped to virtual addresses. A few of the properties of each block are stored in structures called page table entries, which are managed by the OS and accessed by the processor's hardware. Page tables are organized into a tree structure, and the physical page number of the top-level table is stored in control register 3 (CR3).
Microsoft Windows divides virtual address space into two regions. The lower part, starting at zero, is instantiated separately for each process and is accessible from both user and kernel mode. Application programs run in processes and supply code that runs in user mode. The upper part is accessible only from kernel mode, and with some exceptions, is instantiated just once, system-wide. Ntoskrnl.exe is mapped into this region, as are several other kernel mode components. This region also contains data used by kernel mode code, such as the kernel mode heaps and the file system cache.
+ Virtual Address Space Layouts | |||
Arch | MmHighestUserAddress | MmSystemRangeStart | |
---|---|---|---|
x86 | 0x7fffffff | 0x80000000 | |
ARM | |||
x86-64 | 0x000007ff'ffffffff (until Windows 8.1 Update 2)0x00007fff'ffffffff (from Windows 8.1 Update 3) | 0xffff8000'00000000 |
Windows Registry is a repository for configuration and settings information for the operating system and for other software, such as applications. It can be thought of as a filesystem optimized for small files.[11] However, it is not accessed through file system-like semantics, but rather through a specialized set of APIs, implemented in kernel mode and exposed to user mode.
The registry is stored on disk as several different files called "hives." One, the System hive, is loaded early in the boot sequence and provides configuration information required at that time. Additional registry hives, providing software-specific and user-specific data, are loaded during later phases of system initialization and during user login, respectively.
The list of drivers to be loaded from the disk are retrieved from the Services
key of the current control set's key in the SYSTEM
registry hive. That key stores device drivers, kernel processes and user processes. They are all collectively called "services" and are all stored mixed on the same place.
During initialization or upon driver load request, the kernel traverses that tree looking for services tagged as kernel services.
As mentioned in Windows Internals Book 7th edition, the boot-time option increaseuserva
and corresponding header in executable image is required for this feature.