New York State Route 920P Explained

State:NY
Type:NY
Route:920P
Alternate Name:Riverside Drive
Map Custom:yes
Map Alt:Map of New York State Route 920P
Map Notes:Map of Montgomery County in eastern New York with NY 920P highlighted in red
Length Mi:2.20
Direction A:West
Terminus A: in Fultonville
Junction: in Fultonville
Direction B:East
Terminus B: in Glen
Counties:Montgomery

New York State Route 920P (NY 920P) is an unsigned reference route designation for Riverside Drive in the Montgomery County town of Glen, New York, in the United States. The roadway connects NY 30A and NY 5S to exit 28 of the New York State Thruway (Interstate 90 or I-90) in the village of Fultonville. Most of Riverside Drive runs alongside the Mohawk River. Although the route is inventoried by the New York State Department of Transportation (NYSDOT) as NY 920P, the reference markers bear the number 862.

The section of the route east of the Thruway interchange was originally maintained by Montgomery County and designated County Route 119 (CR 119). In 1981, the state of New York assumed ownership and maintenance of CR 119 as part a highway maintenance swap with the county. The new state highway subsequently became part of NY 920P.

Route description

NY 920P begins at an intersection with NY 30A in the village of Fultonville. The route, named Riverside Drive, heads eastward along the Mohawk River, paralleling the New York State Thruway (I-90) and NY 5S to the south. It initially serves a residential area of the village; however, the houses quickly give way to an area of truck stops and other businesses—predominately dining, fuel, and lodging—surrounding Riverside Drive's interchange with the Thruway on the eastern edge of the village. Past exit 28, the development along the highway slowly decreases in density as Riverside Drive heads through the town of Glen.

About from NY 30A, the businesses cease completely while the road curves southward and heads uphill to an overpass carrying the road over the Thruway. Past the Thruway, NY 920P turns back to the east, loosely following the Thruway through an undeveloped, wooded area of the town. Riverside Drive ends from the Thruway overpass at a junction with NY 5S west of the hamlet of Auriesville. The Montgomery County Correctional Facility is located across from Riverside Drive on the south side of NY 5S.

History

By 1978, the portion of Riverside Drive west of the interchange with the New York State Thruway was a short state highway maintained by NYSDOT; however, the remainder of the roadway east to NY 5S was maintained by Montgomery County as CR 119.[1] On April 1, 1981, maintenance and ownership of both CR 119 and CR 52 in northwestern Montgomery County (now NY 67) were transferred to New York State in exchange for a reference route in Glen and then-NY 160 north of Scotch Church (now CR 122 and CR 165, respectively).[2] The entirety of Riverside Drive remains state-maintained to this day as NY 920P.[3]

Future

NY 920P's reference markers bear the number "862", a number reserved for later use by the New York State Department of Transportation. What the number is reserved for is not clear.

See also

Notes and References

  1. Tribes Hill Digital Raster Quadrangle . New York State Department of Transportation . 1978 . 1:24,000 . May 25, 2010.
  2. Web site: New York State Legislature . New York State Legislature . New York State Highway Law § 341 . May 25, 2010.
  3. Book: Official Description of Highway Touring Routes, Bicycling Touring Routes, Scenic Byways, & Commemorative/Memorial Designations in New York State . New York State Department of Transportation . January 2012 . PDF . February 1, 2012.