| Nagant M1895 | |
| Type: | Revolver |
| Service: | 1895–present |
| Wars: | Boxer Rebellion Russo-Japanese War World War I Russian Revolution of 1917 Russian Civil War Finnish Civil War Estonian War of Independence Polish-Soviet War Spanish Civil War Winter War World War II Chinese Civil War Hukbalahap Rebellion Korean War Vietnam War Tuareg rebellion (1990–1995) |
| Designer: | Léon Nagant |
| Number: | ~2,000,000 |
| Length: | 10.5 in (235 mm) |
| Action: | Double action, Single-action |
| Origin: | Belgium |
| Is Ranged: | yes |
| Used By: | See Users |
| Design Date: | 1886 |
| Manufacturer: | Nagant, Soviet Arsenals (Tula & Izhevsk), Państwowa Fabryka Karabinów[1] |
| Production Date: | 1895–1945 |
| Variants: | See Variants |
| Weight: | 1.8 lb (0.8 kg), unloaded |
| Part Length: | 4.5 in (114 mm) |
| Cartridge: | 7.62×38mmR .32 ACP (aftermarket cylinder) |
| Rate: | 14–21 rounds/min |
| Velocity: | 1100 ft/s (335 m/s)[2] [3] |
| Range: | 50 yds (46 m)[4] |
| Feed: | 7-round cylinder |
| Sights: | Fixed front post and rear notch |
The Nagant M1895 is a seven-shot, gas-seal revolver designed and produced by Belgian industrialist Léon Nagant for the Russian Empire.
The Nagant M1895 was chambered for a proprietary cartridge, 7.62×38mmR, and features a gas-seal system, in which the cylinder moves forward when the gun is cocked, to close the gap between the cylinder and the barrel, providing a boost to the muzzle velocity of the bullet and allowing the weapon to be suppressed. Its design would inspire the Pieper M1893 carbine[5] and Steyr 1893 revolver.[6]
The Nagant was designed by Léon Nagant, whose brother Émile had also designed the Mosin–Nagant rifle.[7] The Nagant M1895 was adopted as the standard issue sidearm for the Imperial Russian Army and police officers, where it replaced earlier Smith & Wesson models such as the Model 3.[8]
Production began in Liège, Belgium; however Russia purchased the manufacturing rights in 1898, and moved production to the Tula Arsenal in Russia, and was soon producing 20,000 examples per year.[8]
It was produced in two versions: a double-action version for officers, and a cheaper single-action version for the lower ranks.[9] Seven Nagant revolvers were used by communist revolutionaries to kill the Russian imperial family and their servants in July 1918.[10] After the Russian Revolution, only the double-action version was made. Nagant revolvers were used by the NKVD and Red Army units until the end of World War II, with a total of 2,000,000 produced.[11] The Nagant began to be replaced by the Tokarev semi-automatic pistol in 1933, and was formally replaced by the Makarov in 1952, though Nagant revolvers continued to see limited use in the Korean War and Vietnam War.[12]
The M1895 has a mechanism which, as the hammer is cocked, first turns the cylinder and then moves it forward, closing the gap between the cylinder and the barrel. The cartridge, also unique, plays an important part in sealing the gun to prevent the escape of propellant gases. The bullet is deeply seated, entirely within the cartridge case, and the case is slightly reduced in diameter at its mouth. The barrel features a short conical section at its rear; this accepts the mouth of the cartridge, completing the gas seal. By sealing the gap, the velocity of the bullet is increased by 15 to 45 m/s (50 to 150 ft/s.) This feature also eliminates the possibility of injury from gases escaping through the gap, which can injure a finger if the user holds the gun with a finger positioned beside the gap.[13] The Nagant's sealed firing system meant that the Nagant revolver, unlike most other revolvers, could make effective use of a sound suppressor, and suppressors were sometimes fitted to it.[14]
The disadvantage of this design is that Nagant revolvers were laborious and time-consuming to reload, with the need to manually eject each of the used cartridges, and reload one cartridge at a time through a loading gate. At the time the revolver was designed, this system was obsolete. In British service the Webley Revolver used a top-break cylinder and star extractor to simultaneously eject all spent cartridges and in American service the Smith & Wesson Model 10 employed a similar system but with a swing-out cylinder. The Nagant with its side-loading gate, and ejector rod to remove spent cartridges individually in succession was for all its novelty, outdated as a military revolver in this regard. However, the Nagant design did have the advantage of requiring less machining than more modern formats.
The Nagant M1895 has a heavy trigger pull (about 12 lbs for single and 20 lbs for double).
See main article: 7.62×38mmR.
7.62mm Nagant is also known as 7.62×38mmR (Rimmed) or "Cartridge, Type R". The projectile is seated below the mouth of the cartridge, with the cartridge crimp sitting just above the bullet. When fired, the crimp expands into the forcing cone, completing the gas seal and ostensibly increasing muzzle velocity by approximately 75 ft/s.
Aftermarket cylinders for .32-caliber can be installed, allowing the Nagant to safely fire .32 H&R Magnum or .32 ACP. Shooting any ammunition other than the 7.62×38mmR cartridge with the original cylinder can cause bodily injury from bullet shrapnel or escaping gas, and the excessive pressures produced by some .32 ammunition could also cause catastrophic failure of the cylinder or frame.
Proper fitting ammunition can be reloaded from .32-20 Winchester brass by using the Lee Nagant die set or .30" carbine dies and 9mm Luger shell-holders in the reloading press. This allows the reloaders to work up a load that fits their needs and is specific for the Nagant. While this eliminates the bulged/split/stuck cases experienced when using .32 S&W and .32 H&R, the gas seal that made the Nagant famous will still not fully function as the .32-20 is not long enough to protrude past the cylinder like the original Nagant ammunition.
The Luxembourgish, Swedish, and Norwegian Nagants used a different cartridge, the 7.5 mm Nagant. This ammunition is dimensionally similar but not interchangeable with the 7.5mm 1882 Ordnance (aka Swiss 7.5mm revolver).[15] [16] They lack the gas-seal lock of the Belgian and Russian models.
The black powder cartridge used in Nagant's original gas-sealed revolver design.
Year of introduction: 1878.
Bullet Diameter: 9.25 – 9.30mm (.364 - .374”). Round-nosed lead bullet with paper patch.
Bullet Weight: 11.95-12.3 grams
Case diameters,
Neck: 9.90 – 10.20mm (.389 - .401” inch)
Head: 10.75 – 10.90mm (.423 - .429” inch)
Rim: 12.00 – 12.35mm (.472 - .486” inch)
Berdan primer
Cartridge overall length 33.30 – 34.50mm (1.311 – 1.358 inches)
Cartridge weight 11.95 – 12.30gm (184.41 - 189.81 grains)
Nagant M1878 Belgian Officer's Revolver [9.4mm Nagant] - Single Action / Double Action trigger. 6-shot cylinder.
Nagant M1883 Belgian Infantry Revolver [9.4mm Nagant] - Simplified Single Action Only trigger version. 6-shot cylinder.
Nagant M1886 Belgian Officer's Revolver [9.4mm Nagant] - Simplified Double Action Only trigger version. 6-shot cylinder.
In the 1880s, Luxembourg purchased a total of 190 Nagant revolvers, with the standard model chambered in 7.5mm, and the Gendarmerie receiving a black powder 9.4x22mm variant which could also affix a spike bayonet.[25]
Designated the M1893, and based on the Swedish M1887.[26]
Poland designed approximately 21,000 Nagant wz. 30 revolvers for police use from 1928-1939.[27]
Purchased 12,000 7.5mm Nagants from Belgium in the 1880s.[28]
Chambered in 7.5mm, the Swedish M1887 notably does not have the same gas-sealing feature of the Belgian or Russian Nagants.[29]
In use after independence[33]
