NZASM 10 Tonner 0-4-0T explained

NZASM 10 Tonner 0-4-0T
Powertype:Steam
Designer:Machinefabriek Breda v/h Backer & Rueb
Builder:Louis Smulders & Co., Utrecht
Serialnumber:68, 69, 72
Builddate:1889-1890
Totalproduction:3
Uicclass:Bn2t
Driver:2nd coupled axle
Coupleddiameter:NaN0NaN0
Wheelbase:4feet
Over Couplers:150NaN0
Height:10feet
Frametype:Plate
Axleload:5lt
Coupled 1:5lt
Coupled 2:5lt
Locoweight:10lt
Fueltype:Coal
Fireboxtype:Round-top
Firearea:2.53square feet
Pitch:5feet
Diameterinside:2feet
Lengthinside:4feet
Smalltubediameter:73 tubes
Cylindercount:Two
Cylindersize:NaN0NaN0 bore
NaN0NaN0 stroke
Valvegear:Joy
Valvetype:Slide
Coupling:Johnston link-and-pin
Operator:Delagoa Bay Railway
NZASM
Operatorclass:NZASM 10 Tonner
Numinclass:3
Fleetnumbers:Delagoa 50-52
NZASM 6-8
Officialname:10 Tonner
Deliverydate:1889-1890
Firstrundate:1890

The NZASM 10 Tonner 0-4-0T of 1889 was a South African steam locomotive from the pre-Union era in Transvaal.

In 1889 and 1890, the Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij obtained three tramway steam locomotives for use on the new line from Johannesburg to Boksburg which became known as the Randtram line. Since the railway classified its locomotives according to their weight, these tank locomotives were known as the 10 Tonners.[1]

The Randtram line

As a result of the rapid development of the goldfields on the Witwatersrand in the 1880s and the demand for coal by the growing industry, a concession was granted by the Zuid-Afrikaansche Republiek (ZAR) government to the Nederlandsche-Zuid-Afrikaansche Spoorweg-Maatschappij (Netherlands-South African Railway Company, NZASM) on 20 July 1888 to construct a 16miles railway from Johannesburg to Boksburg. The railway, which was opened on 17 March 1890 with the first train being hauled by a 14 Tonner locomotive, became known as the Randtram, even though it was actually a railway in every aspect and not singularly dedicated to tram traffic. This was the first working railway line in Transvaal.[1] [2] [3]

The concession was extended the following year to continue the line eastwards to Springs, where coal was known to exist, and westwards via Roodepoort to Krugersdorp. The entire 49miles railway was opened to traffic on 10 February 1891.[1]

Manufacturer

In 1889 and 1890, motive power for the tramway service on the Randtram line was obtained from the Machinefabriek Breda voorheen Backer & Rueb (Breda machine factory, formerly Backer & Rueb). It consisted of three tramway steam locomotives, which were built by Louis Smulders & Co. in Utrecht in the Netherlands. Since the NZASM classified its locomotives according to their weight, these tramway locomotives were known as 10 Tonners.[4] [5]

Characteristics

The locomotive was a smaller and less ornate version of the range of rectangular steam tram locomotives which were produced by Machine­fabriek Breda from the later 1800s into the first decades of the 20th century. They were nicknamed Backertjes in the Netherlands.[5] [6]

The compact little locomotive was completely enclosed and the chimney extended through the roof. The inclined cylinders were arranged between the plate frames, while the slide valves above the cylinders were arranged horizontally and actuated by Joy valve gear. The regulator handle was fitted to the side of the steam dome and controlled from that position, while the firebox door was also arranged on the side of the firebox.[1]

Numbering conundrum

Instead of the NZASM 10 Tonner engine numbers in the range from 6 to 8, the Machinefabriek Breda works list recorded them as Delagoa Bay Railway numbers 50 to 52. While one source described these locomotives as having begun their service life on the Randtram line and having later been transferred to the Delagoa Bay Railway in Mozambique, the manufacturer's works list suggests that it was probably the other way around.[4]

This seems to be borne out by another source, according to which the engines only entered service on the Randtram line in 1891.[1]

A similar anomaly exists in respect of the six NZASM 18 Tonner locomotives which were acquired from Manning Wardle and Company in 1890. They were rostered on the NZASM in the number range from 9 to 14, following on from the 10 Tonner engine numbers. However, the Manning Wardle works records list the 18 Tonners as being numbered in the Delagoa Bay Railway number range from 53 to 58, following on from the Delagoa engine numbers for the 10 Tonners. Furthermore, a Manning Wardle builder's picture of an 18 Tonner shows it bearing the Delagoa Bay Railway engine number 57.[7] [8]

At the time the first 10 Tonners and 18 Tonners entered service in March and April 1890, the Randtram line where the 10 Tonners were to be placed in service, had just been opened, with the first train being hauled by a 14 Tonner locomotive. The extensions of the Randtram line towards the east to Springs and towards the west via Roodepoort to Krugersdorp were still in progress.[2]

It appears, therefore, that the 10 Tonners and 18 Tonners initially entered service on, or were at least delivered to, the Delagoa Bay Railway and were only rostered on the NZASM at a later stage.[1] [8]

Service

All railway operations in the two Boer Republics, the ZAR and the Orange Free State, were taken over by the Imperial Military Railways (IMR) during the Second Boer War. The 10 Tonners do not appear in the renumbering lists of the IMR or its successor, the Central South African Railways (CSAR).[9]

Works numbers

The NZASM 10 Tonner works numbers and renumbering are shown in the table.

Notes and References

  1. Espitalier, T.J.; Day, W.A.J. (1944). The Locomotive in South Africa – A Brief History of Railway Development. Chapter IV – The N.Z.A.S.M.. South African Railways and Harbours Magazine, October 1944. pp. 762, 764.
  2. The South African Railways – Historical Survey (Editor George Hart, Publisher Bill Hart, Sponsored by Dorbyl Ltd, Circa 1978)
  3. http://mysite.mweb.co.za/residents/grela/transnet.html A South African Railway History
  4. De Pater, A.D. (1970). The locomotives built by 'Machinefabriek "Breda" voorheen Backer & Rueb. Brill Archive. p. 54.
  5. https://books.google.com/books?id=UcwUAAAAIAAJ Google books extract from The locomotives built by 'Machinefabriek "Breda" voorheen Backer & Rueb
  6. [:nl:Machinefabriek Breda#Activiteiten|Machinefabriek Breda – Activiteiten]
  7. Harman, Fred W. (1999). The Locomotives Built by Manning Wardle & Company – Volume 1 Narrow Gauge, (1st ed.). Toddington, Beds: Century Locoprints. p. 51. .
  8. [:Talk:NZASM 18 Tonner 0-6-0ST#Information on the 18 Tonners|18 Tonner Information supplied by John Nicholas Middleton]
  9. [:Talk:NZASM 10 Tonner 0-4-0T#Information on the 10, 14 and 18 Tonners|10, 14 and 18 Tonner Information supplied by John Nicholas Middleton]