| Murwani Dam | |
| Location Map: | Saudi Arabia |
| Coordinates: | 22.1795°N 39.5687°W |
| Location: | Makkah Region, Saudi Arabia |
| Purpose: | Flood control |
| Status: | O |
| Construction Began: | 2004 |
| Opening: | 2010 |
| Dam Type: | Rock-fill embankment dam |
| Dam Crosses: | Wadi Murwani |
| Dam Height Foundation: | 102m (335feet) |
| Dam Length: | 1012m (3,320feet) |
| Dam Elevation Crest: | 251m (823feet) |
| Dam Volume: | 6000000m2 |
| Spillway Type: | Over the dam |
| Res Capacity Total: | 150000000m2 |
Murwani Dam is a rock-fill embankment dam crossing wadi Murwani in Makkah Region, Saudi Arabia. It is located about 100 km northeast of Jeddah.
The 263 mio. SR contract to build the dam was awarded to Yuksel Insaat Saudia Co Ltd., a subsidiary of the Turkish company Yüksel Holding AŞ. Work on the dam began in 2004. The dam was completed in April 2010.
Main purpose of the dam is flood control, because of flash floods, which occur occasionally in the region (see also 2009 Jeddah floods).
Murwani Dam is a 102 (91 or 101) m tall (height above foundation) and 1,012 m long rock-fill embankment dam with a crest altitude of 251 m. The volume of the dam is 6,000,000 m³. The main dam on the right side has a length of 575 m (height 102 m), the saddle dam on the left of 437 m (height 30 m). The dam features a spillway, which is located between the two dams. Impermeability was achieved by using an asphalt-core, for which 80,000 tons of asphalt were used.
At full reservoir level the reservoir of the dam has a total capacity of 150 mio. m³. The estimated annual contribution into the reservoir is 31 mio. m³; about half of thiswater will be used at a downstream drinking water treatment plant for potable use. The remaining water will be stored in an aquifer or will be lost tofree-surface evaporation.