In chemistry, a hydride is formally the anion of hydrogen (H-), a hydrogen atom with two electrons.[1] The term is applied loosely. At one extreme, all compounds containing covalently bound H atoms are also called hydrides: water (H2O) is a hydride of oxygen, ammonia is a hydride of nitrogen, etc. For inorganic chemists, hydrides refer to compounds and ions in which hydrogen is covalently attached to a less electronegative element. In such cases, the H centre has nucleophilic character, which contrasts with the protic character of acids. The hydride anion is very rarely observed.
Almost all of the elements form binary compounds with hydrogen, the exceptions being He,[2] Ne,[3] Ar,[4] Kr,[5] Pm, Os, Ir, Rn, Fr, and Ra.[6] [7] [8] Exotic molecules such as positronium hydride have also been made.
Bonds between hydrogen and the other elements range from being highly ionic to somewhat covalent. Some hydrides, e.g. boron hydrides, do not conform to classical electron counting rules and the bonding is described in terms of multi-centered bonds, whereas the interstitial hydrides often involve metallic bonding. Hydrides can be discrete molecules, oligomers or polymers, ionic solids, chemisorbed monolayers, bulk metals (interstitial), or other materials. While hydrides traditionally react as Lewis bases or reducing agents, some metal hydrides behave as hydrogen-atom donors and act as acids.
thumb|right|200px|Tris(trimethylsilyl)silane is an example of a hydride with a weak bond to H. It is used as a source of hydrogen atoms.[9]
See also: Hydrogen anion. Free hydride anions exist only under extreme conditions and are not invoked for homogeneous solution. Instead, many compounds have hydrogen centres with hydridic character.
Aside from electride, the hydride ion is the simplest possible anion, consisting of two electrons and a proton. Hydrogen has a relatively low electron affinity, 72.77 kJ/mol and reacts exothermically with protons as a powerful Lewis base.
According to the general definition, every element of the periodic table (except some noble gases) forms one or more hydrides. These substances have been classified into three main types according to the nature of their bonding:[6]
While these divisions have not been used universally, they are still useful to understand differences in hydrides.
These are stoichiometric compounds of hydrogen. Ionic or saline hydrides are composed of hydride bound to an electropositive metal, generally an alkali metal or alkaline earth metal. The divalent lanthanides such as europium and ytterbium form compounds similar to those of heavier alkaline earth metals. In these materials the hydride is viewed as a pseudohalide. Saline hydrides are insoluble in conventional solvents, reflecting their non-molecular structures. Ionic hydrides are used as bases and, occasionally, as reducing reagents in organic synthesis.[11]
Typical solvents for such reactions are ethers. Water and other protic solvents cannot serve as a medium for ionic hydrides because the hydride ion is a stronger base than hydroxide and most hydroxyl anions. Hydrogen gas is liberated in a typical acid-base reaction.
ΔH = −83.6 kJ/mol, ΔG = −109.0 kJ/mol
Often alkali metal hydrides react with metal halides. Lithium aluminium hydride (often abbreviated as LAH) arises from reactions of lithium hydride with aluminium chloride.
According to some definitions, covalent hydrides cover all other compounds containing hydrogen. Some definitions limit hydrides to hydrogen centres that formally react as hydrides, i.e. are nucleophilic, and hydrogen atoms bound to metal centers. These hydrides are formed by all the true non-metals (except zero group elements) and the elements like Al, Ga, Sn, Pb, Bi, Po, etc., which are normally metallic in nature, i.e., this class includes the hydrides of p-block elements. In these substances the hydride bond is formally a covalent bond much like the bond made by a proton in a weak acid. This category includes hydrides that exist as discrete molecules, polymers or oligomers, and hydrogen that has been chem-adsorbed to a surface. A particularly important segment of covalent hydrides are complex metal hydrides, powerful soluble hydrides commonly used in synthetic procedures.
Molecular hydrides often involve additional ligands; for example, diisobutylaluminium hydride (DIBAL) consists of two aluminum centers bridged by hydride ligands. Hydrides that are soluble in common solvents are widely used in organic synthesis. Particularly common are sodium borohydride and lithium aluminium hydride and hindered reagents such as DIBAL.
Interstitial hydrides most commonly exist within metals or alloys. They are traditionally termed "compounds" even though they do not strictly conform to the definition of a compound, more closely resembling common alloys such as steel. In such hydrides, hydrogen can exist as either atomic or diatomic entities. Mechanical or thermal processing, such as bending, striking, or annealing, may cause the hydrogen to precipitate out of solution by degassing. Their bonding is generally considered metallic. Such bulk transition metals form interstitial binary hydrides when exposed to hydrogen. These systems are usually non-stoichiometric, with variable amounts of hydrogen atoms in the lattice. In materials engineering, the phenomenon of hydrogen embrittlement results from the formation of interstitial hydrides. Hydrides of this type form according to either one of two main mechanisms. The first mechanism involves the adsorption of dihydrogen, succeeded by the cleaving of the H-H bond, the delocalisation of the hydrogen's electrons, and finally the diffusion of the protons into the metal lattice. The other main mechanism involves the electrolytic reduction of ionised hydrogen on the surface of the metal lattice, also followed by the diffusion of the protons into the lattice. The second mechanism is responsible for the observed temporary volume expansion of certain electrodes used in electrolytic experiments.
Palladium absorbs up to 900 times its own volume of hydrogen at room temperatures, forming palladium hydride. This material has been discussed as a means to carry hydrogen for vehicular fuel cells. Interstitial hydrides show certain promise as a way for safe hydrogen storage. Neutron diffraction studies have shown that hydrogen atoms randomly occupy the octahedral interstices in the metal lattice (in an fcc lattice there is one octahedral hole per metal atom). The limit of absorption at normal pressures is PdH0.7, indicating that approximately 70% of the octahedral holes are occupied.[12]
Many interstitial hydrides have been developed that readily absorb and discharge hydrogen at room temperature and atmospheric pressure. They are usually based on intermetallic compounds and solid-solution alloys. However, their application is still limited, as they are capable of storing only about 2 weight percent of hydrogen, insufficient for automotive applications.[13]
See main article: Transition metal hydride. Transition metal hydrides include compounds that can be classified as covalent hydrides. Some are even classified as interstitial hydrides and other bridging hydrides. Classical transition metal hydride feature a single bond between the hydrogen centre and the transition metal. Some transition metal hydrides are acidic, e.g., and . The anions potassium nonahydridorhenate and are examples from the growing collection of known molecular homoleptic metal hydrides.[14] As pseudohalides, hydride ligands are capable of bonding with positively polarized hydrogen centres. This interaction, called dihydrogen bonding, is similar to hydrogen bonding, which exists between positively polarized protons and electronegative atoms with open lone pairs.
Hydrides containing protium are known as protides.
Hydrides containing deuterium are known as deuterides. Some deuterides, such as LiD, are important fusion fuels in thermonuclear weapons and useful moderators in nuclear reactors.
Hydrides containing tritium are known as tritides.
Mixed anion compounds exist that contain hydride with other anions. These include boride hydrides, carbohydrides, hydridonitrides, oxyhydrides and others.
Protide, deuteride and tritide are used to describe ions or compounds that contain enriched hydrogen-1, deuterium or tritium, respectively.
In the classic meaning, hydride refers to any compound hydrogen forms with other elements, ranging over groups 1–16 (the binary compounds of hydrogen). The following is a list of the nomenclature for the hydride derivatives of main group compounds according to this definition:[15]
borane, BH3
alumane, AlH3
gallane, GaH3
indigane, InH3
thallane, TlH3
alkanes, alkenes, alkynes, and all hydrocarbons
ammonia ("azane" when substituted), hydrazine
phosphine (note "phosphane" is the IUPAC recommended name)
arsine (note "arsane" is the IUPAC recommended name)
stibine (note "stibane" is the IUPAC recommended name)
bismuthine (note "bismuthane" is the IUPAC recommended name)
helium hydride (only exists as an ion)
According to the convention above, the following are "hydrogen compounds" and not "hydrides":
water ("oxidane" when substituted; synonym: hydrogen oxide), hydrogen peroxide
hydrogen sulfide ("sulfane" when substituted)
hydrogen selenide ("selane" when substituted)
hydrogen telluride ("tellane" when substituted)
hydrogen polonide ("polane" when substituted)
Examples:
used in NiMH batteries
electrodes in cold fusion experiments
a powerful reducing agent used in organic chemistry
selective specialty reducing agent, hydrogen storage in fuel cells
a powerful base used in organic chemistry
reducing agent, rocket fuel, semiconductor dopant, catalyst, used in organic synthesis; also borane, pentaborane and decaborane
used for doping semiconductors
used in semiconductor industry
used for fumigation
many industrial uses, e.g. manufacture of composite materials and water repellents
coolant, fuel, fertilizer, many other industrial uses
component of natural gas, important source of sulfur
All metalloid hydrides are highly flammable. All solid non-metallic hydrides except ice are highly flammable. But when hydrogen combines with halogens it produces acids rather than hydrides, and they are not flammable.
According to IUPAC convention, by precedence (stylized electronegativity), hydrogen falls between group 15 and group 16 elements. Therefore, we have NH3, "nitrogen hydride" (ammonia), versus H2O, "hydrogen oxide" (water). This convention is sometimes broken for polonium, which on the grounds of polonium's metallicity is often referred to as "polonium hydride" instead of the expected "hydrogen polonide".
W. M. Mueller, J. P. Blackledge, G. G. Libowitz, Metal Hydrides, Academic Press, N.Y. and London, (1968)