The aircraft was destroyed and the designer killed in a soaring accident on 22 May 2004.[4]
The Scimitar was intended to use new aerodynamic technology to achieve higher performance in a competition sailplane. The aircraft mated a Schempp-Hirth Ventus fuselage with a wing of the same planform as the Schempp-Hirth Discus, outfitted with an electronic boundary layer control system.
The aircraft was made from carbon-fiber-reinforced polymer and fiberglass with Kevlar wing skins. Its 151NaN1 span wing initially employed a Wortmann FX 79-K-144 airfoil.[5]
The sole example was registered with the US Federal Aviation Administration in the Experimental - Amateur-built category.
The aircraft was involved in a minor accident on 25 April 1998 when trying to land after hitting sinking air while ridge soaring near Scrabble, West Virginia. While landing in a short 4500NaN0 length field the pilot ground looped the aircraft to avoid hitting a tree.[6]
The Scimitar was destroyed on 22 May 2004 while flying in the US Nationals near Alexandria, Pennsylvania. Masak was attempting to cross a ridge line and struck a tree, resulting in his death. The US National Transportation Safety Board determined the cause of the accident to be "The pilot's failure to maintain airspeed, which resulted in an inadvertent stall/spin. A factor was the turbulent wind conditions." A "nationally known, locally based glider instructor" who assisted the accident investigation stated that if Masak had successfully crossed the ridgeline, "he would have been the only pilot to do so, and probably would have easily won the day."