-11.6667°N 27.4667°WThe Lufilian Arc (or Lufilian Belt) is part of a system of orogenic belts in southern Africa formed during the Pan-African orogeny, a stage in the formation of the Gondwana supercontinent.It extends across eastern Angola, the Katanga Province of the southern Democratic Republic of the Congo and the northwest of Zambia.The arc is about long. It has global economic importance owing to its rich deposits of copper and cobalt.
The Katanga Supergroup of Neoproterozoic sediments rests on a basement formed in the Paleoproterozoic or Mesoproterozoic eras.The lower basement is made of granites, gneisses and schists formed during the Eburnean age, about 2100–2000 Ma.The upper basement extends under part of the arc in Zambia and is mostly made of schists, quartzites and quartz-muscovite schists.The Kibaran orogeny deformed and metamorphosed the upper basement between 1350 Ma and 1100 Ma.
The Katanga supergroup sediments are from to thick.Rifting between the Congo and Kalahari cratons around 880 Ma opened two basins, first the Roan rift and then the Nguba rift, both of which gathered sediments.Extension was replaced by compression as the Kalahari and Congo cratons moved back towards each other at the start of the Pan-African orogeny.Nappes advancing from the south deposited olistostrome detritus into the Fungurume foreland basin to the north of the arc.Nappe overthrusting and deformation of the foreland followed before the olistostrome sediments had lithified.
The crust was shortened by up to between 590 and 512 Ma in the Pan-African orogeny. Compression deformed the Katanga supergroup sedimentary rocks into a fold and thrust belt, the Lufilian Arc.Tectonic inversion raised up deposits from the deepest levels.The orogeny lifted and folded Roan strata holding copper and cobalt deposits, which later became exposed through erosion.In several areas they are now accessible through open pit mines, as in the Kambove mines in Katanga.
The Mwembeshi Shear Zone forms the southern boundary of the Lufilian Arc, separating it from the Zambezi belt.The shear zone also dates to the Pan-African orogeny.It allowed a change in the structural vergence, or direction of folding, between the Zambezi Belt and the Lufilian Arc.The Hook granite massif, in the inner arc just north of the Mwembeshi Shear Zone, is a large composite batholith (emplacement of igneous rock) that has intruded into the arc's Kundelungu strata of sediments during or after tectonic activity.Uranium-lead dating of samples of syntectonic granite in the massif gives ages of 559±18 and 566±5 Ma, with 533±3 Ma for post-tectonic granite, showing that the intrusion developed around the same time as the shear zone, presumably from the same causes.
The oldest group of sediments in the Katanga supergroup is the Roan, which started to be deposited in a continental rift basin formed after about 880 Ma as the Congo craton pulled away from the Kalahari craton.Above this the Nguba group until recently has been defined as strata that begin with a diamictite layer, probably created by Sturtian glacial action.It is capped with another diamictite layer that may have been laid down during the Marinoan glaciation (650 to 635 Ma).Many geologists place the most recent strata of the Katanga supergroup within the Kundelungu group.The groups and subgroups of sedimentary rocks are shown in the table below, from youngest to oldest.
| Supergroup | Group | Subgroup | Oldest age | Lithologies |
|---|---|---|---|---|
| Katanga | Kundelungu | Plateaux | Shales and arkoses | |
| Kiubo | Dolomitic shales, sandy shales and sandstones | |||
| Kalule | Dolomitic shales or sandy shales, pink limestones, diamictite | |||
| Nguba | Monwezi | Dolomitic shales or siltstones | ||
| Likasi | Dolomitic or sandy shales, dolomites or limestone, diamictite | |||
| Roan | Mwashya | 760 Ma | Dolomitic shales, dolomites, jaspers and pyroclastics | |
| Dipeta | Interbedded dolomites, argillaceous and dolomitic siltstones | |||
| Mines | Dolomites, dolomitic shales and sandstones | |||
| R.A.T. | 880 Ma | Argillaceous dolomitic siltstones, sandstone and pelites |
| Supergroup | Group | Subgroup | Oldest age | Lithologies |
|---|---|---|---|---|
| Katanga | Plateau | Continental melasse arkoses and shales | ||
| Fungurume | ≤573 Ma | 3. Marginal marine carbonates 2. Marginal marine siliciclastics and continental red beds 1. Olistostromes | ||
| Kundelungu | Kiubo | Marine siliciclastics and carbonates | ||
| Kalule | Marine siliciclastics and carbonates, cap carbonates, glacial deposits | |||
| Nguba | Monwezi | Marine siliciclastics and carbonates | ||
| Likasi | 735 Ma | Cap carbonates, glacial deposits, last rift volcanoes | ||
| Mwashya | 765 Ma | 3. Black shales and volcanics 2. Marine siliciclastics and carbonates 1. Olistostromes | ||
| Roan | Bancroft | Platform carbonates | ||
| Kitwe | Siliciclastics and carbonates | |||
| Mindola | 880 Ma | Siliciclastics, copper mineralization |
The Lufilian Arc contains the African copperbelt, which runs in a northwesterly direction from Zambia into the Katanga Province in the Democratic Republic of the Congo (DRC).The copper deposits are found in the older rocks of the Roan group.In the DRC they are mostly held in dolomitic hosts, with high levels of cobalt.In Zambia they are in low-carbonate shale, sandstone and graywacke.
Historically the African copperbelt ores have been more accessible and higher grade than ores from other locations. In 1932 copper percentages in Zambian ore reserves were 3.44% (Roan Antelope), 4.3% (Rhokana) and 4.14% (Mufulira, Chambishi and Baluba). This compares to 1.41% on average for copper ore reserves in the United States at that time. Additional advantages are that the mines mostly contain sulphide ores, which are comparatively easy to concentrate and smelt, and that labor costs are low.As of 2010 the African copperbelt provided about 25% of the world's copper and about 80% of its cobalt.It also has major zinc and lead deposits.