| Lithgow Blast Furnace | |
| Coordinates: | -33.4751°N 150.1704°W |
| Map Relief: | yes |
| Location: | Inch Street, Lithgow, City of Lithgow, New South Wales, Australia |
| Beginning Label: | Design period |
| Built: | 1906 - 1907 |
| Owner: | Lithgow City Council |
| Designation1: | New South Wales State Heritage Register |
| Designation1 Offname: | Lithgow Blast Furnace; Eskbank Ironworks Blast Furnace site; Industrial Archaeological Site |
| Designation1 Type: | State heritage (archaeological-terrestrial) |
| Designation1 Date: | 2 April 1999 |
| Designation1 Number: | 548 |
| Designation1 Free1name: | Type |
| Designation1 Free1value: | Furnace |
| Designation1 Free2name: | Category |
| Designation1 Free2value: | Mining and Mineral Processing |
| Designation1 Free3name: | Builders |
| Designation1 Free3value: | William Sandford Ltd. |
The Lithgow Blast Furnace is a heritage-listed former blast furnace and now park and visitor attraction at Inch Street, Lithgow, City of Lithgow, New South Wales, Australia. It was built from 1906 to 1907 by William Sandford Limited. It is also known as Eskbank Ironworks Blast Furnace site; Industrial Archaeological Site. The property is owned by Lithgow City Council. It was added to the New South Wales State Heritage Register on 2 April 1999.[1]
Lithgow's association with its iron and steel works was another of this city's big manufacturing eras. Its iron and steel works commenced in October 1875 when the first iron smelting took place. Ore had been discovered by Dan Williams on Eskbank land which was then owned by Enoch Hughes, who had previously worked at the Fitzroy Iron Works at Mittagong. The foundry was erected nearby after Hughes convinced James Rutherford, of Cobb & Co. fame, from Bathurst to become involved. The other principal shareholders were the NSW Minister for Public Works, the Hon. John Sutherland and Dan Williams, an engineer from Canada who worked on the Lithgow Zig Zag railway project. The Lithgow Valley Iron Works (later the Eskbank Ironworks) then consisted of a blast furnace, foundry and two bar rolling mills with the necessary fitting and smiths' shops. About 20000ST of pig iron was made initially from local ores, which was converted into rails and bars. Work was carried on intermittently, until it was decided to pull down the blast furnace and convert the castings into merchant iron.[2]
In May 1880 in the Lithgow Report it stated that the Eskbank Ironworks were working at the rate of four miles of rails per week. The new rails stood the test of 40ST, the required standard being 30ST. The blast furnace was in full swing and 100ST per week of iron was anticipated.
The original blast furnace at the Eskbank Ironworks closed in 1882, and it is reported that James Rutherford - to avoid the temptation to ever reopen it - in the dead of night, used two dray-loads of blasting powder to blow it up. After the blast furnace closed down, the rolling mills were used to re-roll old iron rails into merchant bars. In 1886, William Sandford, leased the rolling mills at the Eskbank Ironworks to roll rails. Sandford bought the ironworks in 1894.[3] The Lithgow Blast Furnace was erected by William Sandford in 1906-1907, a short distance from the Eskbank Colliery which he had purchased outright in 1892. The construction of this later furnace over 1km (01miles) away from the Colliery was widely criticised, but its proximity to the railway and its size, providing scope for expansion, made it an understandable choice. It was constructed for the sole purpose of smelting iron from ore. It is a popular misconception that the site was also an ironworks. Indeed the Eskbank Colliery furnace, which operated between 1875 and 1882, is often confused with Sandford's later furnace.[4]
After a layoff the mills at the Eskbank Ironworks were restarted on 30 July 1894. The old system had been discarded and the mills had now commenced on a partially co-operative principle, which it was expected would cheapen production and give better results generally. During the cessation of work the plant was added to and improved, in this way the sheet mill now starts equipped to produce nearly double its former product. An order for 100ST of spike iron, to be supplied at the rate of 10ST weekly, had been obtained from the Railway Commissioners. The company soon found themselves with an overdraft of about A£60,000 and had decided on closing the works when Sandford took them on lease in 1885. He added mill after mill, with powerful shears, furnaces, boilers and rollers, so that now the mills were fully equipped for the work they had to do. Output for all classes of finished iron and steel for the three years ending 31 December 1901 averaged over 7000ST per annum. It did not cover more than a small percentage of what was imported into Sydney.
The works and sidings occupied a space of about 120NaN0, situated between the Main Western Railway Line and Farmer's Creek, being connected with the main line at Eskbank Station, with sidings all round the works. Sand for the works was obtained from Farmer's Creek, close by, and loam for the foundry from a paddock adjoining the works. Within the ironworks' fence is a colliery adit, where the coal was drawn out by an engine, and the same skips drawn around the works, so that coal was only handled once, into the skips; and the same skips were tipped into the furnace bins in the ironworks. Coal was thus used fresh from the colliery, and bore comparison in heating qualities with most of the English coals. On the siding to the works was situated the steam sawmills, where timber of any ordinary size could be cut and delivered to the works.
To heat the iron for the mill, four large furnaces were used, each capable of heating from NaNST of iron per shift. Attached were large horizontal boilers for raising steam by the waste-head from the furnaces. There was a great deal of equipment on site including immense Cornish boilers, weighing 22ST for raising steam by the waste heat from the furnaces. There was a 1.5adj=onNaNadj=on steam hammer, massive shears for cutting up rails into lengths, a large gantry, 360NaN0 horizontal condensing 175adj=onNaNadj=on engine and giant fly-wheels with 300NaN0 diameters, weighing 40ST.
The No. 2 Sheet Mill had a 35adj=onNaNadj=on flywheel. In the fitting shops were lathes, screwing, drilling and punching machines, nut and bolt machines, and a complete spike-making machine, where spikes for the Railway Construction Department had been made the previous three years. The foundry department had two large travelling cranes, a large and small cupola and an air furnace. There was also a large Siemens melting furnace, for dealing with scrap, scrap and pig iron. It was complete with a steam travelling crane capable of lifting 7adj=onNaNadj=on cast iron moulds and large wrought iron ladles. Cement used in the works was mostly made at the Cullen Bullen Company's lime and cement works, about 10miles from Lithgow There was another mill principally for rolling sheets for galvanising and corrugating sheets up to 120NaN0 long and 27 gauge.
On 24 April 1901 Sandford organised a gala dinner to announce that he and his son Esk had successfully tapped the first viable quantities of steel produced in Australia at the Eskbank Ironworks. He had been working Eskbank since the 1880s, and although tapping steel was a triumph, he was nearly exhausted by it. Sandford felt iron and steel were basic commodities and needed to be boosted, and tried every which way to protect and support his venture. While Lithgow's coal miners were free traders, iron workers and their bosses were protectionists, so, to advance his cause, Sandford ran as a protectionist against Joseph Cook in the 1901 federal parliamentary election. He then tried to convince the NSW government to take over the works.
Finally, when a tender for steel and iron supply became available he bribed three parliamentarians, including William Holman, to win the contract. Part of that deal included the construction of a blast furnace, to enable production of pig iron for steel. Sandford complied.The Blast Furnace was "blown in" and officially opened by the premier of New South Wales, on 13 May 1907. It was Sandford's proudest moment and won him the title of the father of the Australian steel industry. His relations with workers were relatively harmonious and beneficent and the Eskbank estate was, to him, a satisfyingly noisy and smoky place. However behind the scenes, Sandford was financially and mentally strained. He could not raise capital but was unwilling to cede his management to external investors such as John Lysaght Ltd., and although Charles Hoskins and his brother George looked at the plant, they pulled out when they saw the state of the books.
The Commercial Banking Company of Sydney, which had underwritten the operation, foreclosed on the ironworks on 9 December 1907, although it kept the Blast Furnace running. William Sandford Limited could not fulfil its contract to supply the government with iron and steel. With 700 out of work, the Premier invited the Hoskins brothers to take over the Lithgow iron and steelworks. They took over Sandford's overdraft of £138,000, paying £14,000 to shareholders in the form of 4 per cent bonds and paying £50,000 to Sandford himself. Although the complicated deal ensured Sandford's debts were paid and he received enough money to guarantee his financial security, he was devastated and felt deceived by Charles Hoskins. His parting with the Lithgow community was sad for him, his wife Caroline, the workers and their community.[5]
In 1908 the company was purchased by Hoskins Bros, owners of the premier manufacturer of iron pipes in Australia. They made few initial alterations to the Blast Furnace, although the ironworks underwent substantial changes. The Hoskins also succeeded in having Sandford's government contract transferred to themselves and extended until the end of 1916. Their success prompted them to build 80 coke ovens and a second blast furnace at the eastern end of the site in 1913. The second furnace was a near replica of Sandford's original construction, although slightly larger. Fifteen coke ovens were added shortly afterwards to cope with the extra fuel requirements.[1]
The Hoskins were highly active in the development of the ironworking industry and staunchly opposed the growth of unionism.[4] The Hoskins were clear-sighted about the technological problems of the steel and ironworks, and the labour issues, and had considerable business acumen, but Charles Hoskins was impatient and imperious and provoked industrial unrest as soon as he set foot in Lithgow in 1908. He was also a protectionist, and although his negotiations with government over tariffs were never entirely successful, he did manage to get the Eskbank enterprise onto a solid footing before the surge in production caused by World War I.[1] [5]
The outbreak of WWI saw considerable expansion in operations, although Lithgow's monopoly on iron smelting was about to be seriously challenged by BHP, who opened their Newcastle plant in 1915. However, the opening of a Small Arms factory in Lithgow ensured that the Hoskins' works flourished. A great deal of their profit was ploughed back into the expansion of capacity at the steelworks. In 1923 a fifth blowing engine was added to the original furnace. At 400ST, it was the largest in Australia.[1]
In the mid 1920s, the decision was taken to move operations to Port Kembla, where the natural resource and transport network were more attractive. The first parts of the Lithgow site were closed in 1928, although the last employees were dismissed in 1932.[4] [1]
The site was bought by the Lithgow City Council and was opened to the public as The Lithgow Blast Furnace Park in 1988.[1]
The site is on the south-western edge of the former Coal Stage Hill, a natural ridge which has been much modified by the construction and operation of the furnace and plant. It is roughly wedge shaped, with its base line and southern boundary on the line of the Great Western railway line, which runs south-west north-east. The western boundary is formed by the back of Inch Street, while the northern boundary is an artificial line west-east.[1]
The site is on three levels:
Archaeological remains of the three phases of occupation are as follows:
The archaeological potential is high.[1]
Construction was in three phases:
As at 8 April 2009, the layout of the Blast Furnace site represents the organic and uninterrupted growth of a workplace which is now the only relic of one of Australia's major industries. The Blast Furnace was the sole producer of iron in Australia for the first seven years of its life. The remains are in themselves a resource for studying technical changes in ironmaking.[9] [1]
Lithgow Blast Furnace was listed on the New South Wales State Heritage Register on 2 April 1999 having satisfied the following criteria.[1]
Built in 1906-7, the Blast Furnace was the sole producer of iron in Australia for the first seven years of its life. It remained a major producer for the next thirteen, until its closure in 1928. It reflects the growth of the Australian iron and steel industry and the confidence of the emerging nation. These industries were also of enormous importance to New South Wales and Lithgow in particular.[10] [1]
The Blast Furnace has aesthetic value in its superb siting clear of the town, its fine views and its functional architecture. It also has a romantic appeal and has been photographed often. The slag dumps which border the western part of the site powerfully evoke the elemental forces at work in the blast furnace.[9] [1]
The men who built the furnace and worked there under difficult conditions, displayed endurance, solidarity, skill and pride in their work which deserves to be remembered. It is a symbol for the struggle for better conditions. There is still a "spirit of Lithgow" of which the site is a potent expression.[9] [1]
The remains represent an organic growth and refinement of a major industrial plant and are in themselves a resource for studying technical change in ironmaking.[9] [1]