| Weston Windmill | |
| Name Of Mill: | Lannock Mill |
| Coordinates: | 51.9597°N -0.1753°W |
| Operator: | Private |
| Built: | 1860 |
| Purpose: | Corn mill |
| Type: | Tower mill |
| Storeys: | Five storeys |
| Sail Number: | Four sails |
| Sail Type: | Single Patent sails |
| Winding: | Fantail |
| Fantail Blades: | Eight blades |
| Auxpower: | Steam engine, later replaced by a gas engine |
| Pairs Of Millstones: | Four pairs |
Lannock Mill is a Grade II listed tower mill at Weston, Hertfordshire, England which is derelict.
Lannock Mill was built in 1860. A windmill had previously been shown on Warburton's map dated 1720 and Thomas Kitchin's map dated 1749. The mill was built by Richard Christy, who worked it until his son Richard took over in 1868. In 1882, Richard Christy Jr emigrated to America and the mill was taken over by Thomas Sanderson. He installed a steam engine as auxiliary power. The mill was badly damaged in a storm in the late 1880s. Repairs including new sails and cap were carried out by Course's, the Biggleswade millwrights. The steam engine was eventually replaced by a gas engine. The mill was working by wind into the early 1920s and by engine until 1929. The mill was stripped of machinery over the years, leaving the empty tower standing today.[1]
Lannock Mill is a five storey tower mill. The tower is 21feet internal diameter at the base with walls 2feet thick. It is 15feet diameter at curb level with walls 1inchesft4inchesin (ftin) thick. The tower is 48feet to the curb. The mill stood over 60feet high to the top of the cap finial. It had an ogee cap winded by an eight bladed fantail. There were four Single Patent sails. The mill drove four pairs of millstones. The great spur wheel was of cast iron.[1]
Reference for above:-[1]