| Lancer 25 | |
| Designer: | W. Shad Turner |
| Location: | United States |
| Year: | 1975 |
| Builder: | Lancer Yacht Corp Endeavour Yachts |
| Draft: | 2.33feet |
| Displacement: | 34000NaN0 |
| Hull Type: | monohull |
| Construction: | fiberglass |
| Loa: | 24.67feet |
| Lwl: | 20.08feet |
| Beam: | 8feet |
| Engine: | outboard motor |
| Keel Type: | fin keel |
| Ballast: | 12000NaN0 |
| Rudder Type: | internally-mounted spade-type rudder |
| Rig Type: | Bermuda rig |
| Sailplan: | masthead sloop |
| Sailarea Total: | 248square feet |
| Phrf: | 264 |
| Successor: | Lancer 25 Mark V |
The Lancer 25 is an American trailerable sailboat that was designed by W. Shad Turner as a cruiser and first built in 1975.[1] [2] [3]
The boat is a development of the Columbia T-23, which was designed by Alan Payne. The T-23 tooling was supplied by Richard Valdes, the co-founder of Columbia Yachts and founder of Lancer Yachts, who was the brother of Rob Valdes, one of the principals of Endeavour Yachts, who built the Lancer 25 under contract.[1] [3] [4]
The Lancer 25 design was developed into the Lancer 25 Mark V in 1982.[5]
The Lancer 25 PS is a motorsailer design with a new hull shape from the Lancer 25.[6]
The design was actually built by Endeavour Yachts in the eastern United States, under contract to the Lancer Yacht Corp in the United States, both companies founded by Valdes. Production ran from 1975 until 1984.[1] [3] [7] [8]
The Lancer 25 is a recreational keelboat, built predominantly of fiberglass, with wood trim. It has a masthead sloop rig, a raked stem, an angled transom, an internally mounted spade-type rudder controlled by a tiller and a fixed shoal draft fin keel. The keel is wide and hollow to increase cabin space and height. The boat displaces 34000NaN0 and carries 12000NaN0 of lead ballast.[1] [3]
The boat has a draft of 2.33feet with the standard shallow draft keel.[1] [3]
The boat is normally fitted with a small 6to outboard motor for docking and maneuvering.[1] [3]
The design has sleeping accommodation for four to six people, with a short double "V"-berth in the bow cabin, two straight settee berths and two quarter berths in the main cabin. The galley is located on both sides, just forward of the companionway ladder. The galley is equipped with a two-burner stove to port, with an ice box and a sink to starboard. The stove flips over to form a navigation station on the port side. The head is located centered under the "V" berth in the bow cabin. Cabin headroom is 700NaN0.[1] [3]
The design has a PHRF racing average handicap of 264 and a hull speed of 6kn.[3]
In a 2010 review Steve Henkel wrote, "the Lancer 25 has some features not commonly found in boats of this size, for example: berths for four with two quarter berths and two settee berths, all 6' 4" long, plus an optional mini-double V-berth forward over the head area—'mini' because the berth is only 6' 0" long; a standard bed ashore measures 6' 8". Also, the port side counter doubles as a nav work station when the stove is flipped to a counter-side-up position. Good standing headroom is achieved below, but only in part of the cabin ... Best features: The outstanding parameter of the Lancer ... is her headroom, 5' 10", which is gained by lowering part of the cabin sole down into the extra-wide keel cavity (18" at its widest). The remainder of the cabin sole, including the portion on which you would rest your feet while sitting on either settee berth, looks to be about 18 inches higher. Worst features: We have not seen this boat close up, but wonder if absent-minded or oblivious crew might not be in danger of falling into the keel cavity when arising from a settee. Also, the Lancer's 2' 4" keel is not deep enough to permit efficient sailing to windward."[3]
Related development
