In 1953 Central Aircraft, a crop-spraying company based at Yakima, Washington, went into collaboration with the Lamson Aircraft Company, whose President and designer, Robert L. Lamson was a former test pilot for Boeing, setting up a joint venture, the Central-Lamson Corporation, to design and build a specialized agricultural aircraft, the Air Tractor, one of the first purpose-built aircraft for this role.[1] [2] [3] The first prototype Air Tractor, registration N-31237, made its maiden flight on December 10, 1953.[3] It was a single-engined, single-seat biplane of mixed wood and metal construction, with a gulled upper wing to give improved visibility for the pilot, who sat in an open cockpit aft of the trailing edge of the wings. The fuselage was of steel-tube construction, with the structure aft of the pilot's cockpit left uncovered for ease of maintenance. The wings were of fabric-covered wood structure, with all four main wing panels interchangeable, and with fuel tanks installed in the upper wing roots. Large endplates were fitted to the wingtips to give greater lift and better distribution of chemicals. The aircraft was fitted with a fixed tailwheel undercarriage, and was powered by a single Pratt & Whitney Wasp Junior radial engine.[1]
The second Air Tractor, to production standards, flew on December 18, 1954.[3] It had a number of differences from the first prototype, with the rear fuselage fully enclosed and the fuel tanks moved from the wing roots to inside the fuselage, while the engine was enclosed by a cowling.[4] Four more Air Tractors were under construction work but the project was stopped late in 1955.[5] However the design was purchased by Grumman and was later developed into the successful Grumman Ag-Cat.[6]