Kolb Firestar Explained

The Kolb Firestar is a family of American open cockpit, high wing, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.[1] [2] [3] [4]

The Firestar was designed to comply with the American FAR 103 ultralight regulations, including that category's maximum 2540NaN0 empty weight and was later a developed into the current production Kolb Firefly.

Design and development

The Firestar was intended to be a FAR 103 legal ultralight when powered by the 280NaN0 Rotax 277 engine. The 400NaN0 Rotax 447 or the 500NaN0 Rotax 503 were optional engines, although the aircraft then falls into the US Experimental - amateur-built category.

The design features a forward fuselage of welded 4130 steel tubing, mated to an aluminum tailboom. The horizontal stabilizer, tail fin and wings are also constructed of riveted aluminum tubing with all flying surfaces covered in doped aircraft fabric. The wings are quick-folding for storage and ground transport. The aircraft can be made ready to fly from trailering in eight minutes by one person, without the use of tools.

The landing gear is sprung tubing for the main gear, with a steerable sprung tailwheel.

Factory options originally included removable doors for cool weather flying.

The Firestar II was created using the same fuselage but adding a small jump seat in the baggage area. The seating is very restricted for the rear seat passenger and their legs are placed beside the front seat pilot. There are no dual controls. The wing used on the Firestar II is taken from the Kolb Twinstar Mk III. In 1999 the two seat option added only US$216 to the Firestar I base price.[5]

The Firestar II was developed into the Tandem ultralight trainer, which was introduced in 2000. The Tandem incorporated dual controls to facilitate flight instruction.

In 2012 the company introduced the Firestar II SS, with side-by-side configuration seating.[6]

Operational history

Reviewer Andre Cliche said of the Firestar I: "the Firestar is a well proven ultralight that is held in high esteem by pilots and non-pilots alike. lt probably has something to do with its charming clean lines. It has exceptionally clean aerodynamics and can fly with little power."

Kit builder Woody Spurlock of Percival, Iowa stated: "building the little jewel has been a fun project...we are very pleased with the flying characteristics, it handles beautifully".

Variants

Firestar I
  • Single seat, high wing ultralight, powered by a 280NaN0 Rotax 277 engine or optionally a 400NaN0 Rotax 447 or a 500NaN0 Rotax 503 two stroke engine.
    Firestar II
  • Two seat, high wing ultralight, powered by a 400NaN0 Rotax 447 or a 500NaN0 Rotax 503 two stroke engine.
    Tandem
  • Two seat, high wing ultralight trainer, powered by a 640NaN0 Rotax 582 two stroke, liquid-cooled engine.
    Firestar II SS
  • Two seat side-by-side configuration seating and 500NaN0 Rotax 503 two stroke engine or optionally a 640NaN0 Rotax 582 two stroke engine. Introduced in 2012.

    Notes and References

    1. Vandermeullen, Richard: 2012 Kit Aircraft Buyer's Guide, Kitplanes, Volume 28, Number 12, December 2011, page 72. Belvoir Publications. ISSN 0891-1851
    2. Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 53. Primedia Publications. ISSN 0891-1851
    3. Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-36. Cybair Limited Publishing, 2001.
    4. Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, page 187. BAI Communications.
    5. Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page B-87. Cybair Limited Publishing, 2001.
    6. Bernard, Mary and Suzanne B. Bopp: Kolb Aircraft: Firestar II SS, Kitplanes, Volume 29, Number 12, December 2012, page 26. Belvoir Publications. ISSN 0891-1851