Frisco Bridge Explained

Bridge Name:Frisco Bridge
Carries:BNSF Railway
Crosses:Mississippi River
Locale:West Memphis, Arkansas and Memphis, Tennessee
Maint:BNSF Railway
Design:Cantilevered through Truss bridge
Mainspan:791feet
Length:4887feet
Width:30feet
Below:109feet
Num Track:1
Traffic:32.9 trains per day [1]
Open:May 12, 1892
Coordinates:35.1286°N -90.0764°W

The Frisco Bridge, previously known as the Memphis Bridge, is a cantilevered through truss bridge[2] carrying a rail line across the Mississippi River between West Memphis, Arkansas, and Memphis, Tennessee.

Construction

At the time of the Memphis bridge construction, it was a significant technological challenge and is considered to be chief engineer George S. Morison's crowning achievement. No other bridges had ever been attempted on the Lower Mississippi River.

The bridge is built entirely of open-hearth steel, a newly developed material at the time of construction. The structure features a 790feet main span and two additional 600feet spans. Its 65feet height above the water was the highest clearance of any U.S. bridge of that era. The construction of the piers went nearly 100feet below the water's surface.

Though some sources claim two cantilevered roadways were added to the bridge in the 1930s, one on each side,[3] they probably confuse this bridge with the neighboring Harahan Bridge, which had two cantilevered roadways from 1917 until the Memphis & Arkansas Bridge opened in 1949. (The former roadway on the north side of the Harahan Bridge is now designated as Big River Crossing, having been refitted to carry pedestrian and bicycle traffic across the Mississippi River in 2016.) While the Frisco Bridge has not featured cantilevered roadways, pedestrians, buggies, and some automobiles used its main deck before the Harahan Bridge opened (the bridge was closed to such traffic while a train was crossing).[4]

Construction for the Kansas City, Fort Scott and Memphis Railway, later acquired by the "Frisco," began in 1888 and was completed May 12, 1892. In the end the project created a bridge that was the farthest south on the Mississippi River, featured the longest truss span in the United States and cost nearly 3 million dollars.[5]

A testament to its design and construction, the bridge is still used by BNSF Railway and is being renovated as part of a system-wide BNSF infrastructure improvement program.[6] The west approach to the bridge, which was made of 52 spans totaling in length, was replaced by a new 27-span bridge. This project was completed in 2017.[7] The bridge was designated as a National Historic Civil Engineering Landmark in 1987.[8]

See also

External links

Notes and References

  1. Grant application . . The Merchants Bridge rehabilitation program . 2017 . Figure 10: Rail Traffic Volumes Overlaid with Seismic Hazard, 2014 .
  2. https://bridgehunter.com/tn/shelby/frisco/ Bridge Hunter Historic Bridge Page
  3. https://live.asce.org/hh/?lid=116 American Society of Civil Engineers: Morison's Memphis Bridge
  4. Web site: Frisco Bridge, Memphis, TN . Weeks . John A. III . Highways & Bridges.
  5. Web site: Nebraska City Bridge . Fraser . Clayton B. . October 1986 . . . Washington, D.C. . 315–380 . October 19, 2018.
  6. News: Historic Frisco Bridge getting extensive makeover by BNSF . The Commercial Appeal . 2017-10-01 . en.
  7. News: Strand Jacking Optimizes Scheduling and Cost Efficiency in Rail Bridge Overhaul . 20 . Engineering News-Record . January 8, 2018.
  8. News: Waddell . Lisa . October 5, 1987 . Historic bridge to be designated as landmark of civil engineering . The Commercial Appeal . Memphis . B4.