Jordan matrix explained

In the mathematical discipline of matrix theory, a Jordan matrix, named after Camille Jordan, is a block diagonal matrix over a ring (whose identities are the zero 0 and one 1), where each block along the diagonal, called a Jordan block, has the following form:\begin\lambda & 1 & 0 & \cdots & 0 \\0 & \lambda & 1 & \cdots & 0 \\\vdots & \vdots & \vdots & \ddots & \vdots \\0 & 0 & 0 & \lambda & 1 \\0 & 0 & 0 & 0 & \lambda\end .

Definition

λ\inR

, and is denoted as . It is an

n x n

matrix of zeroes everywhere except for the diagonal, which is filled with

λ

and for the superdiagonal, which is composed of ones.

Any block diagonal matrix whose blocks are Jordan blocks is called a Jordan matrix. This square matrix, consisting of diagonal blocks, can be compactly indicated as

J
λ1,n1

J
λr,nr
or
diag\left(J
λ1,n1

,\ldots,

J
λr,nr

\right)

, where the i-th Jordan block is .

For example, the matrixJ=\left[\begin{array}{ccc|cc|cc|ccc} 0 & 1 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 \\ 0 & 0 & 1 & 0 & 0 & 0 & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 \\ \hline 0 & 0 & 0 & i & 1 & 0 & 0 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & i & 0 & 0 & 0 & 0 & 0 \\ \hline 0 & 0 & 0 & 0 & 0 & i & 1 & 0 & 0 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & i & 0 & 0 & 0 \\ \hline 0 & 0 & 0 & 0 & 0 & 0 & 0 & 7 & 1 & 0 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 7 & 1 \\ 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 0 & 7 \end{array}\right]is a Jordan matrix with a block with eigenvalue, two blocks with eigenvalue the imaginary unit, and a block with eigenvalue 7. Its Jordan-block structure is written as either

J0,3Ji,2Ji,2J7,3

or .

Linear algebra

Any square matrix whose elements are in an algebraically closed field is similar to a Jordan matrix, also in

Mn(K)

, which is unique up to a permutation of its diagonal blocks themselves. is called the Jordan normal form of and corresponds to a generalization of the diagonalization procedure. A diagonalizable matrix is similar, in fact, to a special case of Jordan matrix: the matrix whose blocks are all .

More generally, given a Jordan matrix

J=J
λ1,m1

J
λ2,m2

⊕ … ⊕

J
λN,mN
, that is, whose th diagonal block,

1\leqk\leqN

, is the Jordan block and whose diagonal elements

λk

may not all be distinct, the geometric multiplicity of

λ\inK

for the matrix, indicated as

\operatorname{gmul}Jλ

, corresponds to the number of Jordan blocks whose eigenvalue is . Whereas the index of an eigenvalue

λ

for, indicated as

\operatorname{idx}Jλ

, is defined as the dimension of the largest Jordan block associated to that eigenvalue.

The same goes for all the matrices similar to, so

\operatorname{idx}Aλ

can be defined accordingly with respect to the Jordan normal form of for any of its eigenvalues

λ\in\operatorname{spec}A

. In this case one can check that the index of

λ

for is equal to its multiplicity as a root of the minimal polynomial of (whereas, by definition, its algebraic multiplicity for,

\operatorname{mul}Aλ

, is its multiplicity as a root of the characteristic polynomial of ; that is,

\det(A-xI)\inK[x]

). An equivalent necessary and sufficient condition for to be diagonalizable in is that all of its eigenvalues have index equal to ; that is, its minimal polynomial has only simple roots.

Note that knowing a matrix's spectrum with all of its algebraic/geometric multiplicities and indexes does not always allow for the computation of its Jordan normal form (this may be a sufficient condition only for spectrally simple, usually low-dimensional matrices). Indeed, determining the Jordan normal form is generally a computationally challenging task. From the vector space point of view, the Jordan normal form is equivalent to finding an orthogonal decomposition (that is, via direct sums of eigenspaces represented by Jordan blocks) of the domain which the associated generalized eigenvectors make a basis for.

Functions of matrices

Let

A\inMn(\Complex)

(that is, a complex matrix) and

C\inGLn(\Complex)

be the change of basis matrix to the Jordan normal form of ; that is, . Now let be a holomorphic function on an open set

\Omega

such that

specA\subset\Omega\subseteq\Complex

; that is, the spectrum of the matrix is contained inside the domain of holomorphy of . Letf(z)=\sum_^a_h (z-z_0)^hbe the power series expansion of around

z0\in\Omega\setminus\operatorname{spec}A

, which will be hereinafter supposed to be 0 for simplicity's sake. The matrix is then defined via the following formal power seriesf(A)=\sum_^a_h A^hand is absolutely convergent with respect to the Euclidean norm of

Mn(\Complex)

. To put it another way, converges absolutely for every square matrix whose spectral radius is less than the radius of convergence of around and is uniformly convergent on any compact subsets of

Mn(\Complex)

satisfying this property in the matrix Lie group topology.

The Jordan normal form allows the computation of functions of matrices without explicitly computing an infinite series, which is one of the main achievements of Jordan matrices. Using the facts that the th power (

k\in\N0

) of a diagonal block matrix is the diagonal block matrix whose blocks are the th powers of the respective blocks; that is, and that, the above matrix power series becomes

f(A) = C^f(J)C = C^\left(\bigoplus_^N f\left(J_\right)\right)C

where the last series need not be computed explicitly via power series of every Jordan block. In fact, if

λ\in\Omega

, any holomorphic function of a Jordan block

f(Jλ,n)=f(λI+Z)

has a finite power series around

λI

because

Zn=0

. Here,

Z

is the nilpotent part of

J

and

Zk

has all 0's except 1's along the

kth

superdiagonal. Thus it is the following upper triangular matrix:f(J_)= \sum_^ \frac =\beginf(\lambda) & f^\prime (\lambda) & \frac & \cdots & \frac & \frac \\0 & f(\lambda) & f^\prime (\lambda) & \cdots & \frac & \frac \\0 & 0 & f(\lambda) & \cdots & \frac & \frac \\\vdots & \vdots & \vdots & \ddots & \vdots & \vdots \\0 & 0 & 0 & \cdots & f(\lambda) & f^\prime (\lambda) \\0 & 0 & 0 & \cdots & 0 & f(\lambda) \\\end.

As a consequence of this, the computation of any function of a matrix is straightforward whenever its Jordan normal form and its change-of-basis matrix are known. For example, using

f(z)=1/z

, the inverse of

Jλ,n

is:J_^ = \sum_^\frac =\begin\lambda^ & -\lambda^ & \,\,\,\lambda^ & \cdots & -(-\lambda)^ & \,-(-\lambda)^ \\0 & \;\;\;\lambda^ & -\lambda^ & \cdots & -(-\lambda)^ & -(-\lambda)^ \\0 & 0 & \,\,\,\lambda^ & \cdots & -(-\lambda)^ & -(-\lambda)^ \\\vdots & \vdots & \vdots & \ddots & \vdots & \vdots \\0 & 0 & 0 & \cdots & \lambda^ & -\lambda^ \\0 & 0 & 0 & \cdots & 0 & \lambda^ \\\end.

Also, ; that is, every eigenvalue

λ\inspecA

corresponds to the eigenvalue

f(λ)\in\operatorname{spec}f(A)

, but it has, in general, different algebraic multiplicity, geometric multiplicity and index. However, the algebraic multiplicity may be computed as follows:\text_f(\lambda)=\sum_~\text_A \mu.

The function of a linear transformation between vector spaces can be defined in a similar way according to the holomorphic functional calculus, where Banach space and Riemann surface theories play a fundamental role. In the case of finite-dimensional spaces, both theories perfectly match.

Dynamical systems

Now suppose a (complex) dynamical system is simply defined by the equation\begin\dot(t)&=A(\mathbf)\mathbf(t), \\\mathbf(0) &=\mathbf_0 \in\Complex^n,\end

where

z:\R+\tol{R}

is the (-dimensional) curve parametrization of an orbit on the Riemann surface

l{R}

of the dynamical system, whereas is an complex matrix whose elements are complex functions of a -dimensional parameter

c\in\Complexd

.

Even if

A\inMn\left(C0\left(\Complexd\right)\right)

(that is, continuously depends on the parameter) the Jordan normal form of the matrix is continuously deformed almost everywhere on

\Complexd

but, in general, not everywhere: there is some critical submanifold of

\Complexd

on which the Jordan form abruptly changes its structure whenever the parameter crosses or simply "travels" around it (monodromy). Such changes mean that several Jordan blocks (either belonging to different eigenvalues or not) join to a unique Jordan block, or vice versa (that is, one Jordan block splits into two or more different ones). Many aspects of bifurcation theory for both continuous and discrete dynamical systems can be interpreted with the analysis of functional Jordan matrices.

From the tangent space dynamics, this means that the orthogonal decomposition of the dynamical system's phase space changes and, for example, different orbits gain periodicity, or lose it, or shift from a certain kind of periodicity to another (such as period-doubling, cfr. logistic map).

In a sentence, the qualitative behaviour of such a dynamical system may substantially change as the versal deformation of the Jordan normal form of .

Linear ordinary differential equations

The simplest example of a dynamical system is a system of linear, constant-coefficient, ordinary differential equations; that is, let

A\inMn(\Complex)

and

z0\in\Complexn

:\begin\dot(t) &= A\mathbf(t), \\\mathbf(0) &= \mathbf_0,\endwhose direct closed-form solution involves computation of the matrix exponential:\mathbf(t)=e^\mathbf_0.

Another way, provided the solution is restricted to the local Lebesgue space of -dimensional vector fields

1
z\inL
loc
n
(\R
+)
, is to use its Laplace transform

Z(s)=l{L}[z](s)

. In this case\mathbf(s)=\left(sI-A\right)^\mathbf_0.

The matrix function is called the resolvent matrix of the differential operator \frac-A. It is meromorphic with respect to the complex parameter

s\in\Complex

since its matrix elements are rational functions whose denominator is equal for all to . Its polar singularities are the eigenvalues of, whose order equals their index for it; that is,
ord
(A-sI)-1

λ=idxAλ

.

See also