Join and meet explained

S of a partially ordered set P is the supremum (least upper bound) of S, denoted $\backslash bigvee\; S,$ and similarly, the meet of S is the infimum (greatest lower bound), denoted $\backslash bigwedge\; S.$ In general, the join and meet of a subset of a partially ordered set need not exist. Join and meet are dual to one another with respect to order inversion.

A partially ordered set in which all pairs have a join is a join-semilattice. Dually, a partially ordered set in which all pairs have a meet is a meet-semilattice. A partially ordered set that is both a join-semilattice and a meet-semilattice is a lattice. A lattice in which every subset, not just every pair, possesses a meet and a join is a complete lattice. It is also possible to define a partial lattice, in which not all pairs have a meet or join but the operations (when defined) satisfy certain axioms.^[1]

The join/meet of a subset of a totally ordered set is simply the maximal/minimal element of that subset, if such an element exists.

If a subset

S of a partially ordered set P is also an (upward) directed set, then its join (if it exists) is called a directed join or directed supremum. Dually, if S is a downward directed set, then its meet (if it exists) is a directed meet or directed infimum.

Definitions

Partial order approach

Let

A be a set with a partial order \leq, and let x, y \in A. An element m of A is called the (or or ) of x and y and is denoted by x \wedge y, if the following two conditions are satisfied:m \leq x and m \leq y (that is, m is a lower bound of x and y ).

1. For any

w \in A, if w \leq x and w \leq y, then w \leq m (that is, m is greater than or equal to any other lower bound of x and y ).

The meet need not exist, either since the pair has no lower bound at all, or since none of the lower bounds is greater than all the others. However, if there is a meet of

x and y, then it is unique, since if both m and m ^{\prime} are greatest lower bounds of x and y, then m \leq m ^{\prime} and m ^{\prime} \leq m, and thus m = m ^{\prime} . ^[2] If not all pairs of elements from A have a meet, then the meet can still be seen as a partial binary operation on A.

If the meet does exist then it is denoted

x \wedge y. If all pairs of elements from A have a meet, then the meet is a binary operation on A, and it is easy to see that this operation fulfills the following three conditions: For any elements x, y, z \in A,

1. x \wedge y = y \wedge x (commutativity),
2. x \wedge (y \wedge z) = (x \wedge y) \wedge z (associativity), and
3. x \wedge x = x (idempotency).

Joins are defined dually with the join of

x and y, if it exists, denoted by x \vee y. An element j of A is the (or or ) of x and y in A if the following two conditions are satisfied:x \leq j and y \leq j (that is, j is an upper bound of x and y ).

1. For any

w \in A, if x \leq w and y \leq w, then j \leq w (that is, j is less than or equal to any other upper bound of x and y ).

Universal algebra approach

\wedge on a set A is a if it satisfies the three conditions a, b, and c. The pair (A, \wedge) is then a meet-semilattice. Moreover, we then may define a binary relation \leq on A, by stating that x \leq y if and only if x \wedge y = x. In fact, this relation is a partial order on A. Indeed, for any elements x, y, z \in A, x \leq x, since x \wedge x = x by c;

• if

x \leq y and y \leq x then x = x \wedge y = y \wedge x = y by a; and

• if

x \leq y and y \leq z then x \leq z since then x \wedge z = (x \wedge y) \wedge z = x \wedge (y \wedge z) = x \wedge y = x by b.

Both meets and joins equally satisfy this definition: a couple of associated meet and join operations yield partial orders which are the reverse of each other. When choosing one of these orders as the main ones, one also fixes which operation is considered a meet (the one giving the same order) and which is considered a join (the other one).

Equivalence of approaches

If

(A, \leq) is a partially ordered set, such that each pair of elements in A has a meet, then indeed x \wedge y = x if and only if x \leq y, since in the latter case indeed x is a lower bound of x and y, and since x is the lower bound if and only if it is a lower bound. Thus, the partial order defined by the meet in the universal algebra approach coincides with the original partial order.

Conversely, if

(A, \wedge) is a meet-semilattice, and the partial order \leq is defined as in the universal algebra approach, and z = x \wedge y for some elements x, y \in A, then z is the greatest lower bound of x and y with respect to \leq, since$$z\; \backslash wedge\; x\; =\; x\; \backslash wedge\; z\; =\; x\; \backslash wedge\; (x\; \backslash wedge\; y)\; =\; (x\; \backslash wedge\; x)\; \backslash wedge\; y\; =\; x\; \backslash wedge\; y\; =\; z$$and therefore z \leq x. Similarly, z \leq y, and if w is another lower bound of x and y, then w \wedge x = w \wedge y = w, whence$$w\; \backslash wedge\; z\; =\; w\; \backslash wedge\; (x\; \backslash wedge\; y)\; =\; (w\; \backslash wedge\; x)\; \backslash wedge\; y\; =\; w\; \backslash wedge\; y\; =\; w.$$Thus, there is a meet defined by the partial order defined by the original meet, and the two meets coincide.

In other words, the two approaches yield essentially equivalent concepts, a set equipped with both a binary relation and a binary operation, such that each one of these structures determines the other, and fulfill the conditions for partial orders or meets, respectively.

Meets of general subsets

If

(A, \wedge) is a meet-semilattice, then the meet may be extended to a well-defined meet of any non-empty finite set, by the technique described in iterated binary operations. Alternatively, if the meet defines or is defined by a partial order, some subsets of A indeed have infima with respect to this, and it is reasonable to consider such an infimum as the meet of the subset. For non-empty finite subsets, the two approaches yield the same result, and so either may be taken as a definition of meet. In the case where subset of A has a meet, in fact (A, \leq) is a complete lattice; for details, see completeness (order theory).

Examples

\wp(X) is partially ordered in the usual way (by \subseteq ) then joins are unions and meets are intersections; in symbols, \vee = \cup and \wedge = \cap (where the similarity of these symbols may be used as a mnemonic for remembering that \vee denotes the join/supremum and \wedge denotes the meet/infimum^[3]).

More generally, suppose that

l{F} ≠ \varnothing is a family of subsets of some set X that is partially ordered by \subseteq. If l{F} is closed under arbitrary unions and arbitrary intersections and if A, B, \left(F _{i\right)} _{i} belong to l{F} then $$A\; \backslash vee\; B\; =\; A\; \backslash cup\; B,\; \backslash quad\; A\; \backslash wedge\; B\; =\; A\; \backslash cap\; B,\; \backslash quad\; \backslash bigvee\_\; F\_i\; =\; \backslash bigcup\_\; F\_i,\; \backslash quad\; \backslash text\; \backslash quad\; \backslash bigwedge\_\; F\_i\; =\; \backslash bigcap\_\; F\_i.$$But if l{F} is not closed under unions then A \vee B exists in ( l{F}, \subseteq) if and only if there exists a unique \subseteq -smallest J \in l{F} such that A \cup B \subseteq J. For example, if l{F} = \{ \{ 1 \}, \{ 2 \}, \{ 1 , 2 , 3 \}, \R \} then \{ 1 \} \vee \{ 2 \} = \{ 1 , 2 , 3 \} whereas if l{F} = \{ \{ 1 \}, \{ 2 \}, \{ 1 , 2 , 3 \}, \{ 0 , 1 , 2 \}, \R \} then \{ 1 \} \vee \{ 2 \} does not exist because the sets \{ 0 , 1 , 2 \} and \{ 1 , 2 , 3 \} are the only upper bounds of \{ 1 \} and \{ 2 \} in ( l{F}, \subseteq) that could possibly be the upper bound \{ 1 \} \vee \{ 2 \} but \{ 0 , 1 , 2 \} \not\subseteq \{ 1 , 2 , 3 \} and \{ 1 , 2 , 3 \} \not\subseteq \{ 0 , 1 , 2 \}. If l{F} = \{ \{ 1 \}, \{ 2 \}, \{ 0 , 2 , 3 \}, \{ 0 , 1 , 3 \} \} then \{ 1 \} \vee \{ 2 \} does not exist because there is no upper bound of \{ 1 \} and \{ 2 \} in ( l{F}, \subseteq).

References

• Book: 1002.06001. Davey. B.A.. Priestley. H.A.. Introduction to Lattices and Order. Introduction to Lattices and Order. 2nd. Cambridge. Cambridge University Press. 2002. 0-521-78451-4.
• Book: Vickers, Steven. Steve Vickers (computer scientist)

. Steve Vickers (computer scientist). Topology via Logic. Cambridge Tracts in Theoretic Computer Science. 5. 0-521-36062-5. 1989. 0668.54001.

Notes and References

1. Book: Grätzer . George . General Lattice Theory: Second edition . 21 November 2002 . Springer Science & Business Media . 978-3-7643-6996-5 . en . 52.
2. Book: Hachtel . Gary D. . Somenzi . Fabio . Logic synthesis and verification algorithms . 1996 . Kluwer Academic Publishers . 0792397460 . 88 . registration.
3. It can be immediately determined that supremums and infimums in this canonical, simple example (\wp(X), \subseteq) are \cup and \cap, respectively. The similarity of the symbol \vee to \cup and of \wedge to \cap may thus be used as a mnemonic for remembering that in the most general setting, \vee denotes the supremum (because a supremum is a bound from above, just like A \cup B is "above" A and B ) while \wedge denotes the infimum (because an infimum is a bound from below, just like A \cap B is "below" A and B ). This can also be used to remember whether meets/joins are denoted by \vee or by \wedge. Intuition suggests that ""ing two sets together should produce their union A \cup B, which looks similar to A \vee B, so "join" must be denoted by \vee. Similarly, two sets should "" at their intersection A \cap B, which looks similar to A \wedge B, so "meet" must be denoted by \wedge.