| Bridge Name: | John O'Connell Bridge |
| Carries: | 2 lanes of AK-935 |
| Crosses: | Sitka Channel |
| Locale: | Sitka, Alaska |
| Design: | Cable-stayed bridge |
| Material: | steel (pylons) composite steel-reinforced concrete (deck) |
| Length: | 1255feet |
| Width: | 38feet |
| Mainspan: | 450feet |
| Below: | 52feet |
| Complete: | 1971 |
| Open: | 1972 |
| Traffic: | 4,900 (2008) |
The John O'Connell Bridge is a cable-stayed bridge over the Sitka Channel located in Sitka, Alaska. The bridge connects the town of Sitka on Baranof Island to the airport and Coast Guard Station on Japonski Island. Until the bridge was completed in 1971, the commute was only achievable through a ferry service. The bridge is named after John W. O'Connell, a former mayor of Sitka. The two-lane bridge is in total length, with a main span of .[1] The bridge was also the United States' first vehicular cable-stayed girder spanned bridge.[2] The four 100adj=midNaNadj=mid steel pylons carry two three-cable sets, each carrying a section of the bridge deck.[3] [4] Special consideration was given to the bridge's aesthetics due to its proximity to nearby Castle Hill.
Approximately 4000 vehicles cross the bridge every day, up from the approximate 1000 shore boat passengers per day prior to the bridge's completion.
A man from Bellingham, Washington, died in August 2015 after jumping off the bridge to swim ashore.[5]
The bridge was designated as an Alaska Historic Civil Engineering Landmark by the American Society of Civil Engineers in 2022.[6]