| Jinnah Barrage | |
| Dam Crosses: | Indus River |
| Location: | Kalabagh, Mianwali District |
| Dam Length: | 11520NaN0 |
| Dam Height: | 8.50NaN0 |
| Plant Hydraulic Head: | 4.80NaN0 (rated) |
| Spillway Capacity: | 950000ft3/s |
| Purpose: | Irrigation, power |
| Status: | O |
| Construction Began: | 1939 |
| Opening: | 1946 |
| Plant Turbines: | 8 x 12 MW Pit turbines |
| Plant Capacity: | 96 MW |
| Plant Annual Gen: | 688 GWh |
| Location Map: | Pakistan |
| Coordinates: | 32.9185°N 71.5219°W |
The Jinnah Barrage is a barrage on the River Indus near Kalabagh, Pakistan. It is part of the Thal Project which helps irrigate 770000ha in the Sindh Sagar Doab east of the Indus. Planning for the project dates back to the nineteenth century but final plans for the barrage were made in 1919 and it was constructed between 1939 and 1946. The barrage diverts an average of 283m3/s of water into the 51.5km (32miles) long Thal Canal where it serves areas in Bhakkar, Khushab, Layyah, Mianwali and Muzaffargarh Districts with 3362km (2,089miles) of additional canal branches and distributors.[1] [2] It has a maximum flood height of 8.50NaN0 and it spans 11520NaN0 over the river. The barrage can discharge up to 27000m3/s downstream with 42 spillway gates which are each 18.20NaN0 wide.[3] Between 2006 and 2012, a 96 MW hydroelectric power station with four 12 MW pit turbine-generators was added on the right bank.[4] In June 2012 a major rehabilitation project for the barrage began. The project includes the construction of a weir 2440NaN0 downstream to help dissipate energy from the spillway upstream of it. New guide banks will be built and existing ones repaired. The railway bridge upstream will be rehabilitated as well. The project is expected to be complete in June 2016.[2]