| Java class file | |
| Owner: | Sun Microsystems |
A Java class file is a file (with the filename extension) containing Java bytecode that can be executed on the Java Virtual Machine (JVM). A Java class file is usually produced by a Java compiler from Java programming language source files (files) containing Java classes (alternatively, other JVM languages can also be used to create class files). If a source file has more than one class, each class is compiled into a separate class file. Thus, it is called a file because it contains the bytecode for a single class.
JVMs are available for many platforms, and a class file compiled on one platform will execute on a JVM of another platform. This makes Java applications platform-independent.
On 11 December 2006, the class file format was modified under Java Specification Request (JSR) 202.[1]
There are 10 basic sections to the Java class file structure:
Class files are identified by the following 4 byte header (in hexadecimal): CA FE BA BE (the first 4 entries in the table below). The history of this magic number was explained by James Gosling referring to a restaurant in Palo Alto:[2]
"We used to go to lunch at a place called St Michael's Alley. According to local legend, in the deep dark past, the Grateful Dead used to perform there before they made it big. It was a pretty funky place that was definitely a Grateful Dead Kinda Place. When Jerry died, they even put up a little Buddhist-esque shrine. When we used to go there, we referred to the place as Cafe Dead. Somewhere along the line it was noticed that this was a HEX number. I was re-vamping some file format code and needed a couple of magic numbers: one for the persistent object file, and one for classes. I used CAFEDEAD for the object file format, and in grepping for 4 character hex words that fit after "CAFE" (it seemed to be a good theme) I hit on BABE and decided to use it.At that time, it didn't seem terribly important or destined to go anywhere but the trash-can of history. So CAFEBABE became the class file format, and CAFEDEAD was the persistent object format. But the persistent object facility went away, and along with it went the use of CAFEDEAD - it was eventually replaced by RMI."
Because the class file contains variable-sized items and does not also contain embedded file offsets (or pointers), it is typically parsed sequentially, from the first byte toward the end. At the lowest level the file format is described in terms of a few fundamental data types:
Some of these fundamental types are then re-interpreted as higher-level values (such as strings or floating-point numbers), depending on context.There is no enforcement of word alignment, and so no padding bytes are ever used.The overall layout of the class file is as shown in the following table.
| Byte offset | Size | Type or value | Description |
|---|---|---|---|
| 0 | 4 bytes | u1 = 0xCA hex | magic number (CAFEBABE) used to identify file as conforming to the class file format |
| 1 | u1 = 0xFE hex | ||
| 2 | u1 = 0xBA hex | ||
| 3 | u1 = 0xBE hex | ||
| 4 | 2 bytes | u2 | minor version number of the class file format being used |
| 5 | |||
| 6 | 2 bytes | u2 | major version number of the class file format being used.[3] Java SE 22 = 66 (0x42 hex), Java SE 21 = 65 (0x41 hex), Java SE 20 = 64 (0x40 hex), Java SE 19 = 63 (0x3F hex), Java SE 18 = 62 (0x3E hex), Java SE 17 = 61 (0x3D hex), Java SE 16 = 60 (0x3C hex), Java SE 15 = 59 (0x3B hex), Java SE 14 = 58 (0x3A hex), Java SE 13 = 57 (0x39 hex), Java SE 12 = 56 (0x38 hex), Java SE 11 = 55 (0x37 hex), Java SE 10 = 54 (0x36 hex),[4] Java SE 9 = 53 (0x35 hex),[5] Java SE 8 = 52 (0x34 hex), Java SE 7 = 51 (0x33 hex), Java SE 6.0 = 50 (0x32 hex), Java SE 5.0 = 49 (0x31 hex), JDK 1.4 = 48 (0x30 hex), JDK 1.3 = 47 (0x2F hex), JDK 1.2 = 46 (0x2E hex), JDK 1.1 = 45 (0x2D hex). For details of earlier version numbers see footnote 1 at The JavaTM Virtual Machine Specification 2nd edition |
| 7 | |||
| 8 | 2 bytes | u2 | constant pool count, number of entries in the following constant pool table. This count is at least one greater than the actual number of entries; see following discussion. |
| 9 | |||
| 10 | cpsize (variable) | table | constant pool table, an array of variable-sized constant pool entries, containing items such as literal numbers, strings, and references to classes or methods. Indexed starting at 1, containing (constant pool count - 1) number of entries in total (see note). |
| ... | |||
| ... | |||
| ... | |||
| 10+cpsize | 2 bytes | u2 | access flags, a bitmask |
| 11+cpsize | |||
| 12+cpsize | 2 bytes | u2 | identifies this class, index into the constant pool to a "Class"-type entry |
| 13+cpsize | |||
| 14+cpsize | 2 bytes | u2 | identifies super class, index into the constant pool to a "Class"-type entry |
| 15+cpsize | |||
| 16+cpsize | 2 bytes | u2 | interface count, number of entries in the following interface table |
| 17+cpsize | |||
| 18+cpsize | isize (variable) | table | interface table: a variable-length array of constant pool indexes describing the interfaces implemented by this class |
| ... | |||
| ... | |||
| ... | |||
| 18+cpsize+isize | 2 bytes | u2 | field count, number of entries in the following field table |
| 19+cpsize+isize | |||
| 20+cpsize+isize | fsize (variable) | table | field table, variable length array of fieldseach element is a field_info structure defined in https://docs.oracle.com/javase/specs/jvms/se8/html/jvms-4.html#jvms-4.5 |
| ... | |||
| ... | |||
| ... | |||
| 20+cpsize+isize+fsize | 2 bytes | u2 | method count, number of entries in the following method table |
| 21+cpsize+isize+fsize | |||
| 22+cpsize+isize+fsize | msize (variable) | table | method table, variable length array of methodseach element is a method_info structure defined in https://docs.oracle.com/javase/specs/jvms/se8/html/jvms-4.html#jvms-4.6 |
| ... | |||
| ... | |||
| ... | |||
| 22+cpsize+isize+fsize+msize | 2 bytes | u2 | attribute count, number of entries in the following attribute table |
| 23+cpsize+isize+fsize+msize | |||
| 24+cpsize+isize+fsize+msize | asize (variable) | table | attribute table, variable length array of attributeseach element is an attribute_info structure defined in https://docs.oracle.com/javase/specs/jvms/se8/html/jvms-4.html#jvms-4.7 |
| ... | |||
| ... | |||
| ... |
Since C doesn't support multiple variable length arrays within a struct, the code below won't compile and only serves as a demonstration.
The constant pool table is where most of the literal constant values are stored. This includes values such as numbers of all sorts, strings, identifier names, references to classes and methods, and type descriptors. All indexes, or references, to specific constants in the constant pool table are given by 16-bit (type u2) numbers, where index value 1 refers to the first constant in the table (index value 0 is invalid).
Due to historic choices made during the file format development, the number of constants in the constant pool table is not actually the same as the constant pool count which precedes the table. First, the table is indexed starting at 1 (rather than 0), but the count should actually be interpreted as the maximum index plus one.[6] Additionally, two types of constants (longs and doubles) take up two consecutive slots in the table, although the second such slot is a phantom index that is never directly used.
The type of each item (constant) in the constant pool is identified by an initial byte tag. The number of bytes following this tag and their interpretation are then dependent upon the tag value. The valid constant types and their tag values are:
| Tag byte | Additional bytes | Description of constant | Version introduced | |
|---|---|---|---|---|
| 1 | 2+x bytes (variable) | UTF-8 (Unicode) string: a character string prefixed by a 16-bit number (type u2) indicating the number of bytes in the encoded string which immediately follows (which may be different than the number of characters). Note that the encoding used is not actually UTF-8, but involves a slight modification of the Unicode standard encoding form. | 1.0.2 | |
| 3 | 4 bytes | Integer: a signed 32-bit two's complement number in big-endian format | 1.0.2 | |
| 4 | 4 bytes | Float: a 32-bit single-precision IEEE 754 floating-point number | 1.0.2 | |
| 5 | 8 bytes | Long: a signed 64-bit two's complement number in big-endian format (takes two slots in the constant pool table) | 1.0.2 | |
| 6 | 8 bytes | Double: a 64-bit double-precision IEEE 754 floating-point number (takes two slots in the constant pool table) | 1.0.2 | |
| 7 | 2 bytes | Class reference: an index within the constant pool to a UTF-8 string containing the fully qualified class name (in internal format) (big-endian) | 1.0.2 | |
| 8 | 2 bytes | String reference: an index within the constant pool to a UTF-8 string (big-endian too) | 1.0.2 | |
| 9 | 4 bytes | Field reference: two indexes within the constant pool, the first pointing to a Class reference, the second to a Name and Type descriptor. (big-endian) | 1.0.2 | |
| 10 | 4 bytes | Method reference: two indexes within the constant pool, the first pointing to a Class reference, the second to a Name and Type descriptor. (big-endian) | 1.0.2 | |
| 11 | 4 bytes | Interface method reference: two indexes within the constant pool, the first pointing to a Class reference, the second to a Name and Type descriptor. (big-endian) | 1.0.2 | |
| 12 | 4 bytes | Name and type descriptor: two indexes to UTF-8 strings within the constant pool, the first representing a name (identifier) and the second a specially encoded type descriptor. | 1.0.2 | |
| 15 | 3 bytes | Method handle: this structure is used to represent a method handle and consists of one byte of type descriptor, followed by an index within the constant pool. | 7 | |
| 16 | 2 bytes | Method type: this structure is used to represent a method type, and consists of an index within the constant pool. | 7 | |
| 17 | 4 bytes | Dynamic: this is used to specify a dynamically computed constant produced by invocation of a bootstrap method. | 11 | |
| 18 | 4 bytes | InvokeDynamic: this is used by an invokedynamic instruction to specify a bootstrap method, the dynamic invocation name, the argument and return types of the call, and optionally, a sequence of additional constants called static arguments to the bootstrap method. | 7 | |
| 19 | 2 bytes | Module: this is used to identify a module. | 9 | |
| 20 | 2 bytes | Package: this is used to identify a package exported or opened by a module. | 9 |
There are only two integral constant types, integer and long. Other integral types appearing in the high-level language, such as boolean, byte, and short must be represented as an integer constant.
Class names in Java, when fully qualified, are traditionally dot-separated, such as "java.lang.Object". However within the low-level Class reference constants, an internal form appears which uses slashes instead, such as "java/lang/Object".
The Unicode strings, despite the moniker "UTF-8 string", are not actually encoded according to the Unicode standard, although it is similar. There are two differences (see UTF-8 for a complete discussion). The first is that the code point U+0000 is encoded as the two-byte sequence C0 80 (in hex) instead of the standard single-byte encoding 00. The second difference is that supplementary characters (those outside the BMP at U+10000 and above) are encoded using a surrogate-pair construction similar to UTF-16 rather than being directly encoded using UTF-8. In this case each of the two surrogates is encoded separately in UTF-8. For example, U+1D11E is encoded as the 6-byte sequence ED A0 B4 ED B4 9E, rather than the correct 4-byte UTF-8 encoding of F0 9D 84 9E.