| JY15 | |
| Class Image: | Image:JY15 logo.png |
| Image Boat: | JY15s_Racing_at_Raritan_Yacht_Club.jpg |
| Image Caption: | JY15s racing at the Raritan Yacht Club, Perth Amboy, New Jersey |
| Designer: | Rod Johnstone |
| Location: | United States |
| Year: | 1989 |
| No Built: | 3000 |
| Builder: | JY Sailboats Hunter Marine Nickels Boat Works Windrider |
| Crew: | 2 |
| Draft: | 3feet |
| Displacement: | 2750NaN0 |
| Hull Type: | Monohull |
| Construction: | ACP (Advanced Composite Plastic) or Fiberglass |
| Loa: | 15feet |
| Beam: | 5.83feet |
| Keel Type: | centerboard |
| Ballast: | none |
| Rudder Type: | transom-mounted rudder |
| Rig Type: | Bermuda rig |
| Sailplan: | Fractional rigged sloop |
| Sailarea Main: | 100square feet |
| Sailarea Headsail: | 35square feet |
| Sailarea Total: | 135square feet |
The JY15 is an American one-design centerboard dinghy designed by Rod Johnstone in 1989.[1]
The boat was built by JY Sailboats and then by Hunter Marine in the United States. The design was acquired by Nickels Boats Works and built from 2011. Nickels merged with WindRider LLC of Minneapolis, Minnesota in 2015 and production continued, but had ended by 2020.[2] [3] [4] [5] [6]
The JY15 is a recreational, planing hull, sailing dinghy, built predominantly of Advanced Composite Process (ACP) by JY Sailboats and Hunter and later from fiberglass by Nickels and WindRider. It has a fractional sloop, a raked stem, a vertical transom, a transom-hung rudder controlled by a tiller with an extension and a folding centerboard. It displaces 2750NaN0.[2]
The boat has a draft of 3feet with the centreboard extended and 0.5feet with it retracted, allowing beaching or ground transportation on a trailer.[2]
The stays have lever adjusters for rapid set-up and the mast disassembles for ease of ground transport. The mainsheet is a 2:1 and is led off to the centerboard trunk. The rudder swings up for launching and recovering in shallow water. The design is optimized for crew hiking out, with hiking straps and rounded deck and hull for comfort.[1]
The Hunter-production JY-15 was made out of ACP (Advanced Composite Process). ACP is a laminate consisting of a foam core, an inner fiberglass skin, and a 1/8" outer plastic skin. When the design was acquired by Nickels it was rendered in fiberglass.[2] [6]
The JY15 is sailed in over 80 fleets in the US.[6]
Similar sailboats