An isotropic radiator is a theoretical point source of waves which radiates the same intensity of radiation in all directions.[1] [2] [3] [4] It may be based on sound waves or electromagnetic waves, in which case it is also known as an isotropic antenna. It has no preferred direction of radiation, i.e., it radiates uniformly in all directions over a sphere centred on the source.
Isotropic radiators are used as reference radiators with which other sources are compared, for example in determining the gain of antennas. A coherent isotropic radiator of electromagnetic waves is theoretically impossible, but incoherent radiators can be built. An isotropic sound radiator is possible because sound is a longitudinal wave.
The term isotropic radiation means a radiation field which has the same intensity in all directions at each point; thus an isotropic radiator does not produce isotropic radiation.
In physics, an isotropic radiator is a point radiation or sound source. At a distance, the Sun is an isotropic radiator of electromagnetic radiation.
The radiation field of an isotropic radiator in empty space can be found from conservation of energy. The waves travel in straight lines away from the source point, in the radial direction
\hat{r
\left\langleS\right\rangle
(\theta,\phi)
r
r
\left\langleP\right\rangle
\left\langleS\right\rangle
4\pir2
The term isotropic radiation is not usually used for the radiation from an isotropic radiator because it has a different meaning in physics. In thermodynamics it refers to the electromagnetic radiation pattern which would be found in a region at thermodynamic equilibrium, as in a black thermal cavity at a constant temperature.[7] In a cavity at equilibrium the power density of radiation is the same in every direction and every point in the cavity, meaning that the amount of power passing through a unit surface is constant at any location, and with the surface oriented in any direction.[8] This radiation field is different from that of an isotropic radiator, in which the direction of power flow is everywhere away from the source point, and decreases with the inverse square of distance from it.
In antenna theory, an isotropic antenna is a hypothetical antenna radiating the same intensity of radio waves in all directions. It thus is said to have a directivity of 0 dBi (dB relative to isotropic) in all directions. Since it is entirely non-directional, it serves as a hypothetical worst-case against which directional antennas may be compared.
In reality, a coherent isotropic radiator of linear polarization can be shown to be impossible.[9] Its radiation field could not be consistent with the Helmholtz wave equation (derived from Maxwell's equations) in all directions simultaneously. Consider a large sphere surrounding the hypothetical point source, in the far field of the radiation pattern so that at that radius the wave over a reasonable area is essentially planar. In the far field the electric (and magnetic) field of a plane wave in free space is always perpendicular to the direction of propagation of the wave. So the electric field would have to be tangent to the surface of the sphere everywhere, and continuous along that surface. However the hairy ball theorem shows that a continuous vector field tangent to the surface of a sphere must fall to zero at one or more points on the sphere, which is inconsistent with the assumption of an isotropic radiator with linear polarization.
Incoherent isotropic antennas are possible and do not violate Maxwell's equations.
\scriptstyle G ,
\scriptstyle I
\scriptstyle Iiso
In EMF measurement applications, an isotropic receiver (also called isotropic antenna) is a calibrated radio receiver with an antenna which approximates an isotropic reception pattern; that is, it has close to equal sensitivity to radio waves from any direction. It is used as a field measurement instrument to measure electromagnetic sources and calibrate antennas. The isotropic receiving antenna is usually approximated by three orthogonal antennas or sensing devices with a radiation pattern of the omnidirectional type such as short dipoles or small loop antennas.
The parameter used to define accuracy in the measurements is called isotropic deviation.
In optics, an isotropic radiator is a point source of light. The Sun approximates an (incoherent) isotropic radiator of light. Certain munitions such as flares and chaff have isotropic radiator properties. Whether a radiator is isotropic is independent of whether it obeys Lambert's law. As radiators, a spherical black body is both, a flat black body is Lambertian but not isotropic, a flat chrome sheet is neither, and by symmetry the Sun is isotropic, but not Lambertian on account of limb darkening.
An isotropic sound radiator is a theoretical loudspeaker radiating equal sound volume in all directions. Since sound waves are longitudinal waves, a coherent isotropic sound radiator is feasible; an example is a pulsing spherical membrane or diaphragm, whose surface expands and contracts radially with time, pushing on the air.[10]
The aperture of an isotropic antenna can be derived by a thermodynamic argument, which follows.[11] [12] [13]
Suppose an ideal (lossless) isotropic antenna A located within a thermal cavity CA is connected via a lossless transmission line through a band-pass filter F to a matched resistor R in another thermal cavity CR (the characteristic impedance of the antenna, line and filter are all matched). Both cavities are at the same temperature
T~.
\nu
\nu+\Delta\nu~.
The amount of this power
PA
\Delta\nu
T~.
PR
\Delta\nu
The radio noise in the cavity is unpolarized, containing an equal mixture of polarization states. However any antenna with a single output is polarized, and can only receive one of two orthogonal polarization states. For example, a linearly polarized antenna cannot receive components of radio waves with electric field perpendicular to the antenna's linear elements; similarly a right circularly polarized antenna cannot receive left circularly polarized waves. Therefore, the antenna only receives the component of power density in the cavity matched to its polarization, which is half of the total power densitySuppose
B\nu
\nu
T
Ae(\theta,\phi)
\Delta\nu
d\Omega=d\theta d\phi
\theta,\phi
\Delta\nu
4\pi
Ae(\theta,\phi)=Ae
B\nu
The Johnson–Nyquist noise power produced by a resistor at temperature
T
\Delta\nu
PA=PR ,