State: | UT |
Alternate Name: | I-15 Business Loop, Beaver |
Type: | BLSR |
Route: | 160 |
Section: | 121 |
Map Custom: | yes |
Length Mi: | 3.808 |
Length Round: | 3 |
Length Ref: | [1] |
Established: | 1971[2] |
Direction A: | South |
Terminus A: | near Beaver |
Junction: | in Beaver |
Direction B: | North |
Terminus B: | in Beaver |
Previous Type: | SR |
Previous Route: | 159 |
Next Type: | SR |
Next Route: | 161 |
State Route 160 (SR-160) is a state highway in the U.S. state of Utah providing a business loop around I-15 for the town of Beaver in the south-central portion of the state. The route is the main street for the town and spans 3.8miles. The highway was established 1961 as I-15 was constructed through the area, replacing US-91.
The highway begins at a diamond interchange on I-15 heading east and quickly turns north into Main Street. It continues in a northerly direction through the center of the town of Beaver for about 3miles. In the main part of town, it intersects with SR-21 to the west and SR-153 to the east. After leaving town to the north, the route turns back to the west and ends at another diamond interchange with I-15.
The current incarnation of State Route 160 was created in 1961 while I-15 was under construction in the area.[2] It consisted of just 0.4miles of road from the I-15 interchange about 1.3miles south of Beaver northwest to US-91 (SR-1), which ran through the center of town as Main Street. At the same time, State Route 161 was also created, serving a similar purpose, but on the interchange 1miles north of Beaver.
When I-15 was completed north of town in 1964, SR-1 was rerouted as it left Beaver to connect with the new interstate, following the same route as SR-161.[3] As a result, SR-161 was withdrawn to avoid the two state routes overlapping. In 1969, the rest of SR-1 through the town was realigned with I-15. As a result, SR-160 was extended northward to follow the former route of SR-1 along main street north through town, then turning northwest to the interchange at I-15.[2]