Insulated-gate bipolar transistor explained

Insulated-gate bipolar transistor
Working Principle:Semiconductor
Invented:1959
Symbol Caption:IGBT schematic symbol

An insulated-gate bipolar transistor (IGBT) is a three-terminal power semiconductor device primarily forming an electronic switch. It was developed to combine high efficiency with fast switching. It consists of four alternating layers (NPNP)[1] [2] [3] [4] [5] that are controlled by a metal–oxide–semiconductor (MOS) gate structure.

Although the structure of the IGBT is topologically similar to a thyristor with a "MOS" gate (MOS-gate thyristor), the thyristor action is completely suppressed, and only the transistor action is permitted in the entire device operation range. It is used in switching power supplies in high-power applications: variable-frequency drives (VFDs) for motor control in electric cars, trains, variable-speed refrigerators, and air conditioners, as well as lamp ballasts, arc-welding machines, uninterruptible power supply systems (UPS), and induction stoves.

Since it is designed to turn on and off rapidly, the IGBT can synthesize complex waveforms with pulse-width modulation and low-pass filters, thus it is also used in switching amplifiers in sound systems and industrial control systems. In switching applications modern devices feature pulse repetition rates well into the ultrasonic-range frequencies, which are at least ten times higher than audio frequencies handled by the device when used as an analog audio amplifier., the IGBT was the second most widely used power transistor, after the power MOSFET.

IGBT comparison table[6] !Device characteristic!Power BJT!Power MOSFET!IGBT
Voltage ratingHigh <1 kVHigh <1 kVVery high >1 kV
Current ratingHigh <500 ALow <200 AHigh >500 A
Input driveCurrent ratio
hFE ~ 20–200
Voltage
VGS ~ 3–10 V
Voltage
VGE ~ 4–8 V
Input impedanceLowHighHigh
Output impedanceLowMediumLow
Switching speedSlow (μs)Fast (ns)Medium
CostLowMediumHigh

Device structure

An IGBT cell is constructed similarly to an n-channel vertical-construction power MOSFET, except the n+ drain is replaced with a p+ collector layer, thus forming a vertical PNP bipolar junction transistor.This additional p+ region creates a cascade connection of a PNP bipolar junction transistor with the surface n-channel MOSFET. The whole structure comprises a four layered NPNP.

Difference between thyristor and IGBT

Difference between thyristor and IGBT[7]
Aspect Thyristor IGBT
Definition A four-layer semiconductor device with a P-N-P-N structure An insulated-gate bipolar transistor combining features from bipolar transistors and MOSFETs
Terminals Anode, cathode, gate Emitter, collector, gate
Layers Four layers Three layers
Junction PNPN structure NPN(P) structure
Modes of operation Reverse blocking, forward blocking, forward conducting On-state, off-state
Design structure Coupled transistors (PNP and NPN) Combined bipolar and MOSFET features
Carrier source Two sources of carriers One source of carriers
Turn-on voltage N/A Low gate voltage required
Turn off loss Higher Lower
Plasma density Higher Lower
Operating frequency range Suitable for line frequency, typically lower Suitable for high frequencies, typically higher
Die size and paralleling requirements Larger die size, can be manufactured as monolithic devices up to 6" (15 cm) in diameter Smaller die size, often paralleled in a package
Power range Suitable for high-power applications Suitable for medium-power applications
Control requirements Requires gate current Requires continuous gate voltage
Value for money Cost-effective Relatively higher cost
Control method Pulse triggering Gate voltage control
Switching speed Slower Faster
Current switching capability High Moderate
Control current High current drive Low current drive
Voltage capability High voltage handling Lower voltage handling
Power loss Higher power dissipation Lower power dissipation
Application High voltage, robustness High-speed switching, efficiency

History

The bipolar point-contact transistor was invented in December 1947[8] at the Bell Telephone Laboratories by John Bardeen and Walter Brattain under the direction of William Shockley. The junction version known as the bipolar junction transistor (BJT), invented by Shockley in 1948.[9] Later the similar thyristor was proposed by William Shockley in 1950 and developed in 1956 by power engineers at General Electric (GE). The metal–oxide–semiconductor field-effect transistor (MOSFET) was also invented at Bell Labs.[10] [11] [12] The basic IGBT mode of operation, where a pnp transistor is driven by a MOSFET, was first proposed by K. Yamagami and Y. Akagiri of Mitsubishi Electric in the Japanese patent S47-21739, which was filed in 1968.[13]

Following the commercialization of power MOSFETs in the 1970s, B. Jayant Baliga submitted a patent disclosure at General Electric (GE) in 1977 describing a power semiconductor device with the IGBT mode of operation, including the MOS gating of thyristors, a four-layer VMOS (V-groove MOSFET) structure, and the use of MOS-gated structures to control a four-layer semiconductor device. He began fabricating the IGBT device with the assistance of Margaret Lazeri at GE in 1978 and successfully completed the project in 1979.[14] The results of the experiments were reported in 1979.[15] [16] The device structure was referred to as a "V-groove MOSFET device with the drain region replaced by a p-type anode region" in this paper and subsequently as "the insulated-gate rectifier" (IGR),[17] the insulated-gate transistor (IGT),[18] the conductivity-modulated field-effect transistor (COMFET) and "bipolar-mode MOSFET".[19]

An MOS-controlled triac device was reported by B. W. Scharf and J. D. Plummer with their lateral four-layer device (SCR) in 1978.[20] Plummer filed a patent application for this mode of operation in the four-layer device (SCR) in 1978. USP No. 4199774 was issued in 1980, and B1 Re33209 was reissued in 1996.[21] The IGBT mode of operation in the four-layer device (SCR) switched to thyristor operation if the collector current exceeded the latch-up current, which is known as "holding current" in the well known theory of the thyristor.

The development of IGBT was characterized by the efforts to completely suppress the thyristor operation or the latch-up in the four-layer device because the latch-up caused the fatal device failure. IGBTs had, thus, been established when the complete suppression of the latch-up of the parasitic thyristor was achieved as described in the following.

Hans W. Becke and Carl F. Wheatley developed a similar device, for which they filed a patent application in 1980, and which they referred to as "power MOSFET with an anode region".[22] [23] The patent claimed that "no thyristor action occurs under any device operating conditions". The device had an overall similar structure to Baliga's earlier IGBT device reported in 1979, as well as a similar title.[14]

A. Nakagawa et al. invented the device design concept of non-latch-up IGBTs in 1984.[24] The invention[25] is characterized by the device design setting the device saturation current below the latch-up current, which triggers the parasitic thyristor. This invention realized complete suppression of the parasitic thyristor action, for the first time, because the maximal collector current was limited by the saturation current and never exceeded the latch-up current.

In the early development stage of IGBT, all the researchers tried to increase the latch-up current itself in order to suppress the latch-up of the parasitic thyristor. However, all these efforts failed because IGBT could conduct enormously large current. Successful suppression of the latch-up was made possible by limiting the maximal collector current, which IGBT could conduct, below the latch-up current by controlling/reducing the saturation current of the inherent MOSFET. This was the concept of non-latch-up IGBT. "Becke’s device" was made possible by the non-latch-up IGBT.

The IGBT is characterized by its ability to simultaneously handle a high voltage and a large current. The product of the voltage and the current density that the IGBT can handle reached more than 5 W/cm2, which far exceeded the value, 2 W/cm2, of existing power devices such as bipolar transistors and power MOSFETs. This is a consequence of the large safe operating area of the IGBT. The IGBT is the most rugged and the strongest power device yet developed, affording ease of use and so displacing bipolar transistors and even gate turn-off thyristors (GTOs). This excellent feature of the IGBT had suddenly emerged when the non-latch-up IGBT was established in 1984 by solving the problem of so-called "latch-up", which is the main cause of device destruction or device failure. Before that, the developed devices were very weak and were easy to be destroyed because of "latch-up".

Practical devices

Practical devices capable of operating over an extended current range were first reported by B. Jayant Baliga et al. in 1982.[17] The first experimental demonstration of a practical discrete vertical IGBT device was reported by Baliga at the IEEE International Electron Devices Meeting (IEDM) that year.[26] [17] General Electric commercialized Baliga's IGBT device the same year.[14] Baliga was inducted into the National Inventors Hall of Fame for the invention of the IGBT.[27]

A similar paper was also submitted by J. P. Russel et al. to IEEE Electron Device Letter in 1982.[28] The applications for the device were initially regarded by the power electronics community to be severely restricted by its slow switching speed and latch-up of the parasitic thyristor structure inherent within the device. However, it was demonstrated by Baliga and also by A. M. Goodman et al. in 1983 that the switching speed could be adjusted over a broad range by using electron irradiation.[18] [29] This was followed by demonstration of operation of the device at elevated temperatures by Baliga in 1985.[30] Successful efforts to suppress the latch-up of the parasitic thyristor and the scaling of the voltage rating of the devices at GE allowed the introduction of commercial devices in 1983,[31] which could be used for a wide variety of applications. The electrical characteristics of GE's device, IGT D94FQ/FR4, were reported in detail by Marvin W. Smith in the proceedings of PCI April 1984.[32] Smith showed in Fig. 12 of the proceedings that turn-off above 10 amperes for gate resistance of 5 kΩ and above 5 amperes for gate resistance of 1 kΩ was limited by switching safe operating area although IGT D94FQ/FR4 was able to conduct 40 amperes of collector current. Smith also stated that the switching safe operating area was limited by the latch-up of the parasitic thyristor.

Complete suppression of the parasitic thyristor action and the resultant non-latch-up IGBT operation for the entire device operation range was achieved by A. Nakagawa et al. in 1984.[24] The non-latch-up design concept was filed for US patents.[33] To test the lack of latch-up, the prototype 1200 V IGBTs were directly connected without any loads across a 600 V constant-voltage source and were switched on for 25 microseconds. The entire 600 V was dropped across the device, and a large short-circuit current flowed. The devices successfully withstood this severe condition. This was the first demonstration of so-called "short-circuit-withstanding-capability" in IGBTs. Non-latch-up IGBT operation was ensured, for the first time, for the entire device operation range.[34] In this sense, the non-latch-up IGBT proposed by Hans W. Becke and Carl F. Wheatley was realized by A. Nakagawa et al. in 1984. Products of non-latch-up IGBTs were first commercialized by Toshiba in 1985. This was the real birth of the present IGBT.

Once the non-latch-up capability was achieved in IGBTs, it was found that IGBTs exhibited very rugged and a very large safe operating area. It was demonstrated that the product of the operating current density and the collector voltage exceeded the theoretical limit of bipolar transistors, 2 W/cm2 and reached 5 W/cm2.[34]

The insulating material is typically made of solid polymers, which have issues with degradation. There are developments that use an ion gel to improve manufacturing and reduce the voltage required.[35]

The first-generation IGBTs of the 1980s and early 1990s were prone to failure through effects such as latchup (in which the device will not turn off as long as current is flowing) and secondary breakdown (in which a localized hotspot in the device goes into thermal runaway and burns the device out at high currents). Second-generation devices were much improved. The current third-generation IGBTs are even better, with speed rivaling power MOSFETs and excellent ruggedness and tolerance of overloads.[36] Extremely high pulse ratings of second- and third-generation devices also make them useful for generating large power pulses in areas including particle and plasma physics, where they are starting to supersede older devices such as thyratrons and triggered spark gaps. High pulse ratings and low prices on the surplus market also make them attractive to the high-voltage hobbyists for controlling large amounts of power to drive devices such as solid-state Tesla coils and coilguns.

Patent issues

The device proposed by J. D. Plummer in 1978 (US Patent Re. 33209) has the same structure as a thyristor with a MOS gate. Plummer discovered and proposed that the device can be used as a transistor although the device operates as a thyristor in higher current density.[37] The device proposed by J. D. Plummer is referred here as "Plummer’s device". On the other hand, Hans W. Becke proposed, in 1980, another device in which the thyristor action is eliminated under any device operating conditions although the basic device structure is the same as that proposed by J. D. Plummer. The device developed by Hans W. Becke is referred here as "Becke’s device" and is described in US Patent 4364073. The difference between "Plummer’s device" and "Becke’s device" is that "Plummer’s device" has the mode of thyristor action in its operation range, but "Becke’s device" never has the mode of thyristor action in its entire operation range. This is a critical point, because the thyristor action is the same as so-called "latch-up". Latch-up is the main cause of fatal device failure. Thus, theoretically, "Plummer’s device" never realizes a rugged or strong power device which has a large safe operating area. The large safe operating area can be achieved only after latch-up is completely suppressed and eliminated in the entire device operation range. However, the Becke's patent (US Patent 4364073) did not disclose any measures to realize actual devices.

Despite Becke's patent describing a similar structure to Baliga's earlier IGBT device,[14] several IGBT manufacturers paid the license fee of Becke's patent.[22] Toshiba commercialized "non-latch-up IGBT" in 1985. Stanford University insisted in 1991 that Toshiba's device infringed US Patent RE33209 of "Plummer’s device". Toshiba answered that "non-latch-up IGBTs" never latched up in the entire device operation range and thus did not infringe US Patent RE33209 of "Plummer’s patent". Stanford University never responded after Nov. 1992. Toshiba purchased the license of Becke’s patent but never paid any license fee for "Plummer’s device". Other IGBT manufacturers also paid the license fee for Becke's patent.

Applications

See also: Power MOSFET.

, the IGBT is the second most widely used power transistor, after the power MOSFET. The IGBT accounts for 27% of the power transistor market, second only to the power MOSFET (53%), and ahead of the RF amplifier (11%) and bipolar junction transistor (9%).[38] The IGBT is widely used in consumer electronics, industrial technology, the energy sector, aerospace electronic devices, and transportation.

Advantages

The IGBT combines the simple gate-drive characteristics of power MOSFETs with the high-current and low-saturation-voltage capability of bipolar transistors. The IGBT combines an isolated-gate FET for the control input and a bipolar power transistor as a switch in a single device. The IGBT is used in medium- to high-power applications like switched-mode power supplies, traction motor control and induction heating. Large IGBT modules typically consist of many devices in parallel and can have very high current-handling capabilities in the order of hundreds of amperes with blocking voltages of . These IGBTs can control loads of hundreds of kilowatts.

Comparison with power MOSFETs

An IGBT features a significantly lower forward voltage drop compared to a conventional MOSFET in higher blocking voltage rated devices, although MOSFETS exhibit much lower forward voltage at lower current densities due to the absence of a diode Vf in the IGBT's output BJT. As the blocking voltage rating of both MOSFET and IGBT devices increases, the depth of the n- drift region must increase and the doping must decrease, resulting in roughly square relationship decrease in forward conduction versus blocking voltage capability of the device. By injecting minority carriers (holes) from the collector p+ region into the n- drift region during forward conduction, the resistance of the n- drift region is considerably reduced. However, this resultant reduction in on-state forward voltage comes with several penalties:

In general, high voltage, high current and lower frequencies favor the IGBT while low voltage, medium current and high switching frequencies are the domain of the MOSFET.

Modeling

Circuits with IGBTs can be developed and modeled with various circuit simulating computer programs such as SPICE, Saber, and other programs. To simulate an IGBT circuit, the device (and other devices in the circuit) must have a model which predicts or simulates the device's response to various voltages and currents on their electrical terminals. For more precise simulations the effect of temperature on various parts of the IGBT may be included with the simulation.Two common methods of modeling are available: device physics-based model, equivalent circuits or macromodels. SPICE simulates IGBTs using a macromodel that combines an ensemble of components like FETs and BJTs in a Darlington configuration. An alternative physics-based model is the Hefner model, introduced by Allen Hefner of the National Institute of Standards and Technology. Hefner's model is fairly complex but has shown good results. Hefner's model is described in a 1988 paper and was later extended to a thermo-electrical model which include the IGBT's response to internal heating. This model has been added to a version of the Saber simulation software.[39]

IGBT failure mechanisms

The failure mechanisms of IGBTs includes overstress (O) and wearout(wo) separately.

The wearout failures mainly include bias temperature instability (BTI), hot carrier injection (HCI), time-dependent dielectric breakdown (TDDB), electromigration (ECM), solder fatigue, material reconstruction, corrosion. The overstress failures mainly include electrostatic discharge (ESD), latch-up, avalanche, secondary breakdown, wire-bond liftoff and burnout.[40]

See also

Further reading

External links

Notes and References

  1. https://www.onsemi.com/pub/Collateral/HBD871-D.PDF
  2. G.c . Mahato . Niranjan . Abu . Waquar Aarif . 2018-04-24 . Analysis on IGBT Developments . International Journal of Engineering Research & Technology . en-US . 4 . 2 . 10.17577/IJERTCONV4IS02018 . 2278-0181.
  3. Web site: insulated-gate bipolar transistor (IGBT) JEDEC . 2024-08-20 . www.jedec.org.
  4. Web site: IGBT Structure About IGBTs TechWeb . 2024-08-20 . techweb.rohm.com.
  5. Shao . Lingfeng . Hu . Yi . Xu . Guoqing . 2020 . A High Precision On-Line Detection Method for IGBT Junction Temperature Based on Stepwise Regression Algorithm . IEEE Access . 8 . 186172–186180 . 10.1109/ACCESS.2020.3028904 . 2169-3536.
  6. http://www.electronics-tutorials.ws/power/insulated-gate-bipolar-transistor.html Basic Electronics Tutorials
  7. https://www.nevsemi.com/blog/igbt-vs-thyristor Difference Between IGBT and Thyristor
  8. Web site: 1947: Invention of the Point-Contact Transistor . August 10, 2016 . Computer History Museum.
  9. Web site: 1948: Conception of the Junction Transistor . August 10, 2016 . Computer History Museum.
  10. Frosch . C. J. . Derick . L . 1957 . Surface Protection and Selective Masking during Diffusion in Silicon . Journal of The Electrochemical Society . en . 104 . 9 . 547 . 10.1149/1.2428650.
  11. KAHNG . D. . 1961 . Silicon-Silicon Dioxide Surface Device . Technical memorandum of Bell Laboratories.
  12. Book: Lojek, Bo . History of Semiconductor Engineering . 2007 . Springer-Verlag Berlin Heidelberg . 978-3-540-34258-8 . Berlin, Heidelberg . 321.
  13. Book: Majumdar . Gourab . Takata . Ikunori . Power Devices for Efficient Energy Conversion . 2018 . . 9781351262316 . 144, 284, 318 .
  14. Book: Baliga . B. Jayant . The IGBT Device: Physics, Design and Applications of the Insulated Gate Bipolar Transistor . 2015 . . 9781455731534 . xxviii, 5–12 .
  15. Baliga . B. Jayant . B. Jayant Baliga . Enhancement- and depletion-mode vertical-channel m.o.s. gated thyristors . Electronics Letters . 1979 . 15 . 20 . 645–647 . 10.1049/el:19790459 . 1979ElL....15..645J . 0013-5194.
  16. Advances in Discrete Semiconductors March On . Power Electronics Technology . . 52–56 . 31 July 2019 . September 2005 . https://web.archive.org/web/20060322222716/http://powerelectronics.com/mag/509PET26.pdf . 22 March 2006 . live .
  17. Book: 10.1109/IEDM.1982.190269 . The insulated gate rectifier (IGR): A new power switching device . 1982 International Electron Devices Meeting . 1982 . Baliga . B.J. . Adler . M. S. . Gray . P. V. . Love . R. P. . Zommer . N. . 264–267 . 40672805 .
  18. 10.1109/EDL.1983.25799 . Fast-switching insulated gate transistors . 1983 . Baliga . B.J. . . 4 . 12 . 452–454 . 1983IEDL....4..452B . 40454892 .
  19. Book: 10.7567/SSDM.1984.B-6-2 . High Voltage Bipolar-Mode MOSFET with High Current Capability . Extended Abstracts of the 1984 International Conference on Solid State Devices and Materials . 1984 . Nakagawa . Akio . Ohashi . Hiromichi . Tsukakoshi . Tsuneo .
  20. Scharf . B. . Plummer . J. . A MOS-controlled triac device . 1978 IEEE International Solid-State Circuits Conference. Digest of Technical Papers . 1978 . XXI . 222–223 . 10.1109/ISSCC.1978.1155837 . 11665546 .
  21. https://patents.google.com/patent/USRE33209 B1 Re33209
  22. https://patents.google.com/patent/US4364073 U. S. Patent No. 4,364,073
  23. Web site: C. Frank Wheatley, Jr., BSEE . Innovation Hall of Fame at A. James Clark School of Engineering.
  24. Book: 10.1109/IEDM.1984.190866 . Non-latch-up 1200V 75A bipolar-mode MOSFET with large ASO . 1984 International Electron Devices Meeting . 1984 . Nakagawa . A. . Ohashi . H. . Kurata . M. . Yamaguchi . H. . Watanabe . K. . 860–861 . 12136665 .
  25. A. Nakagawa, H. Ohashi, Y. Yamaguchi, K. Watanabe and T. Thukakoshi, "Conductivity modulated MOSFET" US Patent No. 6025622 (Feb. 15, 2000), No. 5086323 (Feb. 4, 1992) and No. 4672407 (Jun. 9, 1987).
  26. Shenai . K. . The Invention and Demonstration of the IGBT [A Look Back] . IEEE Power Electronics Magazine . 2015 . 2 . 2 . 12–16 . 10.1109/MPEL.2015.2421751 . 37855728 . 2329-9207.
  27. Web site: NIHF Inductee Bantval Jayant Baliga Invented IGBT Technology . . 17 August 2019.
  28. 10.1109/EDL.1983.25649 . The COMFET—A new high conductance MOS-gated device . 1983 . Russell . J.P. . Goodman . A. M. . Goodman . L.A. . Neilson . J. M. . IEEE Electron Device Letters . 4 . 3 . 63–65 . 1983IEDL....4...63R . 37850113 .
  29. Book: 10.1109/IEDM.1983.190445 . Improved COMFETs with fast switching speed and high-current capability . 1983 International Electron Devices Meeting . 1983 . Goodman . A.M. . Russell . J. P. . Goodman . L. A. . Nuese . C. J. . Neilson . J. M. . 79–82 . 2210870 .
  30. Temperature behavior of insulated gate transistor characteristics . Solid-State Electronics . 28 . 3 . 289–297 . 10.1016/0038-1101(85)90009-7 . 1985 . Baliga . B. Jayant . 1985SSEle..28..289B.
  31. Product of the Year Award: "Insulated Gate Transistor", General Electric Company, Electronics Products, 1983.
  32. Marvin W. Smith, "APPLICATIONS OF INSULATED GATE TRANSISTORS", PCI April 1984 PROCEEDINGS, pp. 121–131, 1984.
  33. A. Nakagawa, H. Ohashi, Y. Yamaguchi, K. Watanabe and T. Thukakoshi, "Conductivity modulated MOSFET", US Patent No. 6025622 (Feb. 15, 2000), No. 5086323 (Feb. 4, 1992) and No. 4672407 (Jun. 9, 1987).
  34. Book: 10.1109/IEDM.1985.190916 . Experimental and numerical study of non-latch-up bipolar-mode MOSFET characteristics . 1985 International Electron Devices Meeting . 1985 . Nakagawa . A. . Yamaguchi . Y. . Watanabe . K. . Ohashi . H. . Kurata . M. . 150–153 . 24346402 .
  35. Web site: Ion Gel as a Gate Insulator in Field Effect Transistors . dead . https://web.archive.org/web/20111114011218/http://www.license.umn.edu/Products/Ion-Gel-as-a-Gate-Insulator-in-Field-Effect-Transistors__Z07062.aspx . 2011-11-14 .
  36. 10.1109/T-ED.1987.22929 . Safe operating area for 1200-V nonlatchup bipolar-mode MOSFET's . 1987 . Nakagawa . A. . Yamaguchi . Y. . Watanabe . K. . Ohashi . H. . IEEE Transactions on Electron Devices . 34 . 2 . 351–355 . 1987ITED...34..351N . 25472355 .
  37. Book: 10.1109/ISSCC.1978.1155837 . A MOS-controlled triac device . 1978 IEEE International Solid-State Circuits Conference. Digest of Technical Papers . 1978 . Scharf . B. . Plummer . J. . 222–223 . 11665546 .
  38. News: Power Transistor Market Will Cross $13.0 Billion in 2011 . 15 October 2019 . IC Insights . June 21, 2011.
  39. Hefner . A.R. . Diebolt . D.M. . An experimentally verified IGBT model implemented in the Saber circuit simulator . IEEE Transactions on Power Electronics . September 1994 . 9 . 5 . 532–542 . 10.1109/63.321038 . 1994ITPE....9..532H . 53487037 .
  40. Patil . N. . Celaya . J. . Das . D. . Goebel . K. . Pecht . M. . Precursor Parameter Identification for Insulated Gate Bipolar Transistor (IGBT) Prognostics . IEEE Transactions on Reliability . June 2009 . 58 . 2 . 271–276 . 10.1109/TR.2009.2020134 . 206772637 .