| InflateSail | |
| Mission Type: | Technology |
| Operator: | von Karman Institute for Fluid Dynamics |
| Cospar Id: | 2017-036F |
| Satcat: | 42770 |
| Spacecraft Type: | 3U CubeSat |
| Manufacturer: | Surrey Space Centre[1] |
| Launch Date: | UTC |
| Launch Rocket: | PSLV-C38 |
| Deployment Date: | UTC |
| Decay Date: | 3 September 2017[2] |
| Orbit Epoch: | 29 August 2017 03:26:51 UTC |
| Orbit Reference: | Geocentric |
| Orbit Regime: | Low Earth |
| Orbit Periapsis: | 397km (247miles) |
| Orbit Apoapsis: | 408km (254miles) |
| Orbit Inclination: | 97.4408 degrees |
| Orbit Period: | 92.6 minutes |
| Apsis: | gee |
InflateSail was a 3U CubeSat launched on PSLV C38 on 23 June 2017 into a 505 km polar Sun-synchronous orbit. It carried a 1 m long inflatable rigidizable mast, and a 10 m2 drag-deorbiting sail. Its primary aim was to demonstrate the effectiveness of drag based deorbiting from low Earth orbit (LEO).[3] [4] Built by Surrey Space Centre of the University of Surrey, it was one of the Technology Demonstrator CubeSats for the QB50 mission. An identical drag sail payload was planned to be included on the RemoveDEBRIS demonstrator.
The inflatable mast was deployed first to distance the sail from the main body of the satellite. The inflatable skin was a 3-ply, 45 μm thick metal-polymer laminate which used the same strain rigidization process as the Echo 2 balloon. The inflation gas was stored in two cool gas generators (CGGs).[5] The inflation gas was vented almost immediately after the deployment and rigidization process. Fully folded, the inflatable was just over 6cm (02inches) in height.[6]
The 10 m2 sail was made up of four quadrants of 12 μm thick polyethylene naphthalate, supported by four bistable carbon fiber tape-springs.[7] The structure was similar in format to both NanoSail-D2[8] and LightSail 2.[9] The deployment of the sail was driven by a brushless DC motor.
InflateSail included an avionics suite to support the deployable sail payload. The spacecraft was powered by a GOMSpace power system and returned attitude data from the Stellenbosch/Surrey Attitude Determination and Control System.
Communications with ground were executed through the TRXVU Transceiver procured from ISIS, using the UHF band to transmit and the VHF to receive.
Beacon data containing spacecraft parameters were transmitted at 60s intervals at 436.060MHz 1200bd BPSK.[10]
InflateSail was launched on board the PSLV-C38 as one of 31 passenger satellites. InflateSail was one of 8 QB50 satellites on this launch. PSLV-C38 lifted off at 09:29 (IST)/03:59 (UTC) on 23 June 2017 from Satish Dhawan Space Centre in India. InflateSail was ejected into a 518x494km orbit approximately 20 minutes after lift off.
InflateSail successfully deployed its sail approximately one hour after ejection from the launch vehicle and was the first European sail successfully deployed in space. InflateSail rapidly lost altitude and decayed on 3 September 2017 after 72 days in orbit.[11]