IS-2 | |
Type: | Heavy tank |
Origin: | Soviet Union |
Is Ranged: | Yes |
Is Artillery: | Yes |
Is Vehicle: | Yes |
Service: | 1944-1970s |
Used By: | See Operators |
Wars: | World War II, Korean War |
Designer: | Zhozef Kotin Nikolay Dukhov |
Number: |
|
Spec Label: | IS-2 Model 1944 |
Length: | 9.9m (32.5feet) |
Width: | 3.09m (10.14feet) |
Height: | 2.73m (08.96feet) |
Design Date: |
|
Manufacturer: | Kirov Factory, UZTM |
Unit Cost: | IS-2 Model 1944: 264,400 rubles[1] |
Production Date: |
|
Weight: | 46t |
Crew: | 4 (Commander/Radio Operator, Gunner, Loader, Driver |
Armour: | IS-2 Model 1944: Hull front: 100 mm at 60° angle Lower glacis: 100 mm at 30° angle Turret front: 100 mm (rounded) Mantlet: 120 mm (rounded) Hull side: 90–130 mm at 9-25° Turret side: 90 mm at 20° angle. |
Primary Armament: | D-25T 122 mm gun (28 rounds) |
Secondary Armament: | 1×DShK, 3×DT (2,079 rounds) |
Engine: | V-2-10 (V-2IS) based on the Kharkiv model V-2 |
Engine Power: | 520PS |
Pw Ratio: | 11.3 PS/tonne |
Suspension: | torsion bar |
Fuel Capacity: | 820L |
Vehicle Range: | Road: 240km (150miles) Cross-country: 180km (110miles) [2] |
Speed: | 37km/h |
The IS-2 (Russian: ИС-2, sometimes romanized as JS-2[3]) is a Soviet heavy tank, the second of the IS tank series named after the Soviet leader Joseph Stalin. It was developed and saw combat during World War II and saw service in other Soviet allied countries after the war.
The KV-1 was criticized by its crews for its poor mobility and the lack of a larger caliber gun than the T-34 medium tank. It was much more expensive than the T-34, without having greater combat performance. Moscow ordered some KV-1 assembly lines to shift to T-34 production, leading to fears that KV-1 production would be halted, and the SKB-2 design bureau, led by Kotin, closed. In 1942, this problem was partially addressed by the KV-1S tank, which had thinner armor than the original, making it lighter and faster. It was competitive with the T-34 but at the cost of no longer having the heavier armor. Production of the KV-1S was gradually replaced by the SU-152 and ended in April 1943.
The capture of a German Tiger tank in January 1943 led to a decision to develop a new heavy tank, which was given the codename Object 237. Before Object 237 had time to mature, intense tank fighting in the summer of 1943 demanded a response. Dukhov's team was instructed to create a stopgap KV tank, the KV-85, which was armed with the 52-K-derivative gun of the SU-85, the 85 mm D-5T, that proved capable of penetrating the Tiger I from 1000m (3,000feet). The KV-85 was created by mounting an Object 237 turret on a KV-1S hull. To accommodate the Object 237 turret, the KV-1S hull was modified, increasing the diameter of the turret ring with fillets on the sides of the hull. The radio operator was replaced with an ammunition rack for the larger 85 mm ammunition. The hull MG was then moved to the opposite side of the driver and fixed in place to be operated by the driver. From September to October 1943, a total of 130 KV-85s were produced, before the assembly lines began to shift over. Like the KV-1S, the KV-85 served in dwindling numbers and was quickly overshadowed by the superior IS series.
The Object 237 prototype, a version of the cancelled KV-13, was accepted for production as the IS-85 heavy tank. First deliveries were made in October 1943, and the tanks went immediately into service. Production ended in January 1944. Its designation was simplified to IS-1 after the introduction of the IS-122, later renamed as IS-2 for security purposes.
By 1943, engineers had succeeded in mounting the 85 mm gun to the T-34 medium tank, making it as well-armed as the KV-85 heavy tank. Efforts to up-gun the IS-85 began in late 1943. Two candidate weapons were the D-25 122 mm tank gun, the ballistic characteristics of which were identical to the A-19 122 mm gun, and the D-10 100 mm gun, which was based on a dual-purpose naval gun. The D-10 had been designed for anti-tank fire and had better armor penetration than the A-19, but the smaller caliber meant it had a less useful high explosive round. Also, the D-10 was a relatively new weapon in short supply, while there was excess production capacity for the A-19 and its ammunition. Compared to the older F-34 76.2 mm tank gun, the D-25 delivered 5.37 times the muzzle energy.
After testing both the D-25 and D-10 on the IS-122, the former was selected as the main armament of the new tank. The D-25 used a separate shell and powder charge, resulting in a lower rate of fire compared to the single-piece ammunition used in most tanks, a serious disadvantage in tank-to-tank engagements. Soviet proving-ground tests showed that the D-25 could penetrate the front armor of the German Panther at 2500m (8,200feet) while the D-10 could do so at a maximum range of 1500m (4,900feet).[4] It was therefore considered an adequate anti-tank gun. First deliveries of IS-122s mounted with this gun were in December 1943.
A Wa Pruef 1 Report dated 5 October 1944 has data on the penetration ranges of the 122 mm A-19 gun against a Panther tank angled at 30 degrees; this estimated that the A-19 gun was unable to penetrate the upper glacis plate of the Panther from any distance, could penetrate the lower glacis plate from 100m (300feet), could penetrate the mantlet from 500m (1,600feet) and could penetrate the front turret from 1500m (4,900feet). The side armour of the Panther was comparatively weaker and could be penetrated at 3500m (11,500feet) according to the same report. Testing with captured Tiger I tanks in Kubinka showed that the 122 mm D-25T was capable of penetrating the Tiger's turret from 1000– and the weld joint or edges of the front hull plates at ranges of 500–.[5] In 1944, the BR-471 was the sole armor-piercing round available. An improved version, the BR-471B (Russian: БР-471Б|links=no) was developed in spring 1945 but was available in quantity only after World War II ended.
According to the same Wa Pruef 1 report, it was estimated that at 30 degree obliquity the hull armor of the Soviet IS-2 model 1943 would be defeated by a Tiger I between at the driver's front plate and nose, while the IS-2's 122 mm gun would penetrate the Tiger's front armor from between . A Panther had to close to to guarantee penetration of the IS-2's frontal armor (The Panther's 75 mm gun could penetrate the IS-2 model 1943's mantlet from, front turret from, and driver's front plate from), while the IS-2 could penetrate the Panther at ranges of . However, in the summer of 1944, the Germans experienced a shortage of manganese and had to switch to using high-carbon steel alloyed with nickel, which made armor very brittle, especially at the seam welds. The performance of the 122 mm AP shells of the IS-2 against the Panther improved considerably. The reports from the front described cases where the BR-471 APHE round 122 mm projectile fired from ricocheted off the front armor of a Panther, leaving huge breaches in it.[6] According to Steven Zaloga, the IS-2 and Tiger I could knock each other out in normal combat distances below . At any range, the performance of each tank against each other was dependent on the crew and combat situation.
The large 122 mm HE shell was its main asset, proving highly useful and destructive as an infantry-killer. In extremis, the IS-2 engaged enemy heavy armor with OF-471 (Russian: ОФ-471|links=no) high explosive projectiles. These shells weighed, a muzzle velocity of, and were equipped with a TNT charge. The explosive power could blow off an enemy tank turret, drive sprocket and tread off the heaviest German tank even if it could not penetrate the armor.[7] Mechanical shock and explosion was often enough to knock out enemy heavy tanks.[8]
The most recognizable disadvantage of the D-25T gun was its slow rate of fire due to the large size and weight of the shells; only one to one and a half rounds per minute could be fired, initially.[9] After some design improvements, including a semi-automatic drop breech over the previously manual screw breech, the rate of fire increased to 2–3 rounds per minute.[9] According to other sources, the increase may have amounted to 3–4 rounds per minute. Another limitation imposed by the size of its ammunition in a relatively small vehicle was the ammunition stowage: only 28 rounds could be carried inside the tank, with a complement of 20 HE rounds, and 8 AP rounds the norm.
The IS-2's armour was primarily composed from casting, which involves pouring molten metal into a mold and letting it cool. This method was done to reduce production costs and thus increase the number of vehicles that could be built (in contrast to its contemporary the Tiger II, which required significant machining in its construction). Casting also made it easier to vary the shape and thickness of the armour, which also reduced the exterior surface relative to tank volume. However, casting had to account for the metal shrinking as it cooled (becoming denser) and with limitations on Soviet casting technology, IS-2 armour thickness could vary even when produced from the same mold. Lower-quality alloys had to sometimes be used, substituting manganese for nickel, meaning that while the armour had high hardness and resisted penetration better than steel, it was also quite brittle and thus at risk of shattering.[10]
The IS-122 prototype replaced the IS-85 and began mass production as the IS-2. The 85 mm guns could be reserved for the new T-34-85 medium tank and some of the IS-1s built were rearmed before leaving the factory and issued as IS-2s. It was slightly lighter and faster than the heaviest KV model 1942 tank, with thicker front armor and a much-improved turret design. The tank could carry thicker armor than the KV series, while remaining lighter, due to the better layout of the armor envelope. The KV's armor was less well-shaped and featured heavy armor even on the rear, while the IS series concentrated its armor at the front. The IS-2 was slightly heavier than the Panther, much lighter than the Tiger I and Tiger II and had a lower silhouette than both. Western observers tended to criticize Soviet tanks for their lack of finish and crude construction. The Soviets argued that it was warranted, considering the need for wartime expediency and the typically short battlefield life of their tanks.
Early IS-2s can be identified by the 'stepped' front hull casting with its small, opening driver's visor. The early tanks lacked gun tube travel locks or anti-aircraft-capable machine guns and had narrow mantlets.
In late 1944, the stepped hull front was replaced with an improved single casting of 120 mm thickness angled at 60 degrees. This new nose lacked the opening driver's visor. It is sometimes incorrectly referred to as the IS-2M, but that designation actually refers to a much later modernization program from the 1950s. Other minor upgrades included the addition of a travel lock on the hull rear, wider mantlet and, on very late models, an anti-aircraft machine gun. However, the model 1944 did not fully replace the model 1943.
In comparison to the Tiger I, the IS-2 had advantages in armour, even though it was 10 tons lighter. In 1944, the IS-2 was the only large-scale Allied tank whose armor provided some protection from the well-known Tiger 88mm long-barreled guns and Panther 75mm L/70 guns.
In the mid-1950s, the remaining IS-2 tanks (mostly model 1944 variants although several model 1943 variants) were upgraded to the IS-2M standard, which introduced fittings such as external fuel tanks on the rear hull (the basic IS-2 had these only on the hull sides), stowage bins on both sides of the hull and protective skirting along the top edges of the tracks.
The IS-2 tank first saw combat in early 1944, equipping elite Guards Heavy Tank Regiments of the Red Army. A regiment had 21 IS-2 tanks in four companies of five tanks each and one being used by the regimental commander. The special tank regiments were reserved for important attacks, often to spearhead attempts to break through fortified German positions like anti-tank defence lines and bunkers. The tanks supported infantry in the assault by destroying bunkers, buildings, dug-in weapons and engaging German armoured vehicles. Once a breakthrough was achieved, lighter and more mobile tanks were used for exploitation and mopping-up. The IS-2 tank first saw action in Ukraine in early 1944 and claimed to have destroyed more than forty Tigers and Elefants for the loss of only eight tanks.
On the morning of 11 August 1944, the 16th Panzer Division attacked the 53rd Guards Tank Brigade reinforced by the 71st Independent Guards Heavy Tank Regiment in the town of Oględów, toward Staszów. The extremely sandy terrain forced the eleven King Tigers to keep to the roads, whilst the defending Soviet forces positioned their tanks and assault guns in ambush positions and concentrated on the known German avenues of approach. When the attack started, three Tiger IIs were destroyed by fire from Soviet IS-2 tanks at a range of 800m (2,600feet), and one more Tiger II was knocked out a few hours later by a T-34/76 at a range of less than 400m (1,300feet). Later in the day, Soviet forces counter-attacked and seized the town of Oględów and found three abandoned Tiger IIs. The capture of these tanks allowed the Soviets to conduct tests at Kubinka and to evaluate its strengths and weaknesses.
By the 1950s, the emergence of the main battle tank concept—combining medium-tank mobility with the firepower and armor of the heavy tank—had rendered heavy tanks obsolete. In the late 1960s the remaining Soviet heavy tanks were transferred to Red Army reserve service and storage. The IS-2 Model 1944 remained in service much longer in the armies of Cuba, China and North Korea. A regiment of Chinese IS-2s was available for use in the Korean War but saw no service there.
After the Korean War, China attempted to reverse-engineer the IS-2/IS-3 as the Type 122 medium tank. The project was cancelled in favor of the Type 59, a copy of the Soviet T-54A.
There are several surviving IS-1 and IS-2 tanks, with examples found at the following:
ro:Cristian Crăciunoiu
. 221 . 1995 . Arms and Armour . London . 9781854092670.