| IMBEL IA2 | |
| Type: | Assault rifle (5.56mm) Battle rifle (7.62mm) Sniper rifle (7.62mm) |
| Service: | 2012–present |
| Number: | 200.000+ |
| Length: | IA2 5.56: 850mm IA2 7.62: NaNmm |
| Origin: | Brazil |
| Is Ranged: | yes |
| Part Length: | IA2 5.56: 350mm IA2 7.62: NaNmm |
| Feed: | STANAG magazine (5.56 mm Version) 20-round FAL Mag (7.62 mm Version) |
| Rate: | 650–750-round/min cyclic (Depending on the version) |
| Weight: | 3.38lk=onNaNlk=on to 4kg (09lb) empty (Depending on the version) |
| Velocity: | 850m/s to 900m/s (Depending on the version) |
| Used By: | See Users below |
| Variants: | See Variants |
| Production Date: | 2012–present |
| Range: | 300m-600m (Depending on the version) |
| Max Range: | 3600m (Depending on the version) |
| Sights: | Rear sight with side adjustment with 2 positions (150 and 300 meters); various optics |
The IA2 assault rifle, designed and built in Brazil by IMBEL, is designed to replace the FAL, M16A2 and HK33 currently in service with the Brazilian Armed Forces.
The IA2 was created by Lieutenant Colonel Paulo Augusto Capetti Rodrigues Porto of the Brazilian Armaments Industry (IMBEL),[1] to replace FN FAL and its variants in the ranks of the Brazilian Army. After the Army realized that IMBEL MD-97 could not meet the basic requirements to replace the FAL, IMBEL began to modernize the MD-97 project, but the simple modernization of the project, which used many FAL parts, was not enough to meet the needs of the Army.
With this, the project of a totally new weapon began in 2012, initially named as MD-97 Mk.II, not just a modernization of the MD-97, but a totally new rifle. It was unveiled in 2010, when it began to be tested in the Center of Evaluations of Army (CAEx), in the test field of Marambaia, Rio de Janeiro. In 2012, the Army commissioned the initial order of 1,500 IA-2 rifles, in the 5.56×45mm NATO and 7.62×51mm NATO model, to be distributed for testing between Various units of the Army, such as the Special Operations Brigade, the Parachute Infantry Brigade and the Jungle Infantry Brigades.[2]
The final product performed over 70 thousand fire shots, and was subjected to endurance tests, sand, dust, high and low temperatures as well as immersion in water, followed by firing. The performance in tests in the jungle environment proved its reliability, as well as its run time of 15 seconds after submersion. Its performance was also tested in parachuting, caatinga and special operations.[3]
In 2012, tests were carried out for the operational evaluation of 20 rifles at the Brazilian Marine Corps through COMANF, the Battalion Riverine Operations and 3rd Infantry Battalion of Marines, under the coordination of Board of Navy Weapon Systems (DSAM) and Equipment Command of the Marines (CMatFN). The performance of the rifle was evaluated under operational conditions, where was verified, for example, its compatibility with the individual equipment of the military and its resistance to impacts and contact with sand, water or mud.[4]
In December 2013 the Brazilian Army placed an order for 20,000 rifles in 5.56. In 2016, it was announced that CAEx would be testing five prototypes of the Fz 7.62 version.
The IA2 comes in 2 calibers: 5.56×45mm NATO and 7.62×51mm NATO. It is not a Modular Weapon System like Colt CM901, Remington ACR, CZ 805, or Beretta ARX-160.
The 7.62 NATO variant still uses the FAL operating system (tilting breechblock) versus the 5.56's rotating bolt. The IA2 makes extensive use of polymers, and features a non-reciprocating cocking handle on the left side of the receiver. The charging handle is the same as in the FAL, though it is not the folding version featured in the para-FAL.
The 5.56 variant accepts an M16 compatible STANAG magazine,[5] while the 7.62 accepts FAL magazines. There is a magazine release button on the right side of the weapon, as well as a paddle magazine release between the magazine and the trigger guard, as in the FAL.
The IA2 uses the same sight as the Para-FAL, a flip-up 2 position sight with positions of 150 and 250 meters,[6] manually adjustable in the horizontal plane without the need for screwdrivers or other tools. The sight mass is also the same as the FAL, adjustable in height. The IA2's gas system is manually adjustable. The gas piston can be easily removed for maintenance by twisting the gas port to the disassembly position, and the rifle comes equipped with a cleaning kit. The bolt remains open on the last shot of a magazine.
The handguard has an internal heat-deflecting aluminum plate, which allows up to 200 shots in a row without overheating, unlike the FAL, which did not exceed 60. The handguard is designed to be tightly attached to the rifle, unlike the FAL which due to its age had its own worn and loose, which also caused noise. Due to integrated Picatinny rails, the IA2 supports a wide range of equipment and accessories such as scopes, flashlights, grenade launchers, lasers, etc.[5] The barrel is equipped with a standard NATO flash hider, and supports the use of rifle grenades. The rifle can be equipped with an IA2 or AMZ bayonet, manufactured by IMBEL.
Relative to the previous MD-97, the rifle had its ergonomics improved, with a reduced size and improved grip, which breaks one of the main similarities between the MD-97 and the FAL. The polymer grip, much more ergonomic than in previous weapons, allows for a more comfortable positioning of the hand in standing, kneeling and lying positions, in addition to having a polymer trigger guard integrated into the piece, avoiding the surfaces of metal contact of the previous model, which caused certain injuries in rough handling and resulted in problems in the cold.
Initially, in the 5.56 version, a telescopic polymer stock was designed, with a modern design, very similar to the one used in the FN SCAR rifle, and in the 7.62 version, a collapsible polymer stock very similar to that of the M964A1 Para-FAL, with modern design. Over time, the stock of the 5.56 rifle was abandoned, being supplanted by the stock of the 7.62 version, as it is cheaper and easier to manufacture. The butt plate has high resistance rubber to soften the impact of the rifle's recoil. The stock's polymer coating prevents facial skin contact with metal surfaces, making it useful in operations at extreme temperatures. The stock can be folded without pressing any button; however, as a way to keep it safely in the folded position, there is a locking system that joins the top of the stock with the cartridge case deflector.
Unlike the FAL, the IA2's shots don't have a tendency to rise and the weapon performs better in urban and close environments, with a size of about 30 cm and weight of about 2 kg less than the previous weapons.
The IA2 has been heavily criticized by experts and users alike. Many of such criticisms relate to the design limitations inherited from the FAL, which was used as a base for the IA2's design to retain training familiarity and parts commonality.
Among the criticisms are the fact that its charging handle is not directly attached to the bolt carrier, while also not possessing forward assist, forcing the soldier to disassemble the rifle in the middle of combat should the bolt fail to close fully due to mechanical failure or obstructions in the chamber, such as dirt and mud. The charging handle is a knob on the left side of the weapon, identical to that of the FAL, but due to it not being like that of the paratrooper FAL, which folds forwards when not in use, it often snags on soldiers' gear. The charging handle is non-ambidextrous, as is the fire mode selector and safety switch, which is positioned on the left side of the trigger assembly. All this makes it difficult for left-handed shooters to operate. The fire selector switch is the same as the MD97, and adopts a 180º angle when switching between firing modes. Meanwhile, modern rifles, aiming at better ergonomics, adopt a 90º angle. This would prevent the operator from having to take his hand off the grip to use the switch and also from uncomfortably stretching his finger too much. The designers of the weapon say they omitted considerations for left handed shooters, as they make up only 10% of the troops; it was decided it was not worth the cost and time to accommodate to them.
Some commentators say the magazine release button is stiff and difficult to actuate.
The railed dust cover has been reported by users to not be properly fixed to the handguard, which makes the use of sights and precision optical equipment ineffective as the zero of sights and lasers is not maintained consistently while firing. This greatly limits the weapon's utility as a precision weapon.
The IA2 did not modify the pivoting axis for disassembling the weapon, which is located between the magazine well and the trigger guard,.
Despite the polymer stock, the IA2 uses the same folding and locking mechanism as the MD97, which has been described as suboptimal by users, as the stock is seen to wobble while firing. Also criticized is the abandonment of the retractable stock, which provides better ergonomics for use by people of different body structures and facilitates the handling of the weapon from unusual firing positions in urban combat.
| Name | Barrel Length | Total Length (Stock Extended) | Total Length (Stock Folded) | Weight (ammunition excluded) | Ammunition Feeding | Notes | |
|---|---|---|---|---|---|---|---|
| 5.56mm Assault Rifle | 350mm | 850mm | 600mm | 3.38 kg | STANAG 5.56×45mm magazine, standard capacity 30 rounds. | ||
| 5.56mm Carbine | 350mm | 850mm | 600mm | 3.38 kg | STANAG 5.56×45mm magazine, standard capacity 30 rounds. | ||
| 7.62mm Rifle | 389mm | 920mm | 670mm | 4.03 kg | FAL 7.62×51mm magazine, standard capacity 20 rounds. | ||
| 7.62mm Carbine | 265mm | 800mm | 550mm | 3.76 kg | FAL 7.62×51mm magazine, standard capacity 20 rounds. | This short barreled version is intended for police use. This version is equipped with a muzzle brake. |