HMS Scotsman was a third-batch S-class submarine of the third batch built for the Royal Navy during World War II. After training exercises in Britain during which she ran aground, requiring repairs, she was transferred to the Pacific fleet as the war with Germany had ended. The submarine sank one junk en route to her submarine unit, but arrived after the end of the Pacific War and World War II. She was scrapped in November 1964.
The third batch was slightly enlarged and improved over the preceding second batch of the S-class. The submarines had a length of 217feet overall, a beam of 23feet and a draft of 14feet. They displaced 814LT on the surface and 990LT submerged.[1] The S-class submarines had a crew of 48 officers and ratings. Scotsman had thicker hull plating which increased her diving depth to 350feet.[2]
For surface running, the boats were powered by two 9500NaN0 diesel engines, each driving one propeller shaft. When submerged each propeller was driven by a 650hp electric motor. They could reach 15kn on the surface and underwater.[3] Scotsman could carry more fuel than most of the third batch boats and had a range of 7500nmi on the surface at and 120nmi at submerged.[2]
Scotsman was armed with six 21 inch (533 mm) torpedo tubes in the bow. She carried six reload torpedoes for a total of a dozen torpedoes. Twelve mines could be carried in lieu of the torpedoes. The boat was also equipped with a 4-inch (102 mm) deck gun[4] and a 20mm Oerlikon light AA gun.[5]
HMS Scotsman was a third-batch S-class submarine, ordered by the British Admiralty on 20 December 1941, during World War II. She was laid down in the Scotts Shipbuilding and Engineering Company shipyard in Greenock on 15 April 1943 and was launched on 18 August 1944.[6] On 9 December 1944, Scotsman, under the command of Lieutenant Alan H. B. Anderson, was commissioned into the Royal Navy.[7] [6]
After anti-submarine and gunnery exercises off the River Clyde and Scapa Flow, Scotsman departed for Holy Loch on 24 March 1945, for additional training. During additional training on 7 April, the boat ran aground, forcing her to dock for repairs in Greenock until 28 May.[7]
With the war in Europe ended, on 11 June 1945 Scotsman departed Holy Loch to redeploy to the Pacific theater of operations, where war was still being fought against he Japanese Empire. Along with her sister ship HMS Spur and HMS Turpin, she made the passage from Britain to Gibraltar, then to Malta. She continued on with Spur through Port Said, Aden, and Trincomalee to her unit based at Subic Bay, Philippines. Shortly before arriving, she sank a junk with gunfire west of the Island of Borneo. With the Surrender of Japan and the end of the war in the Pacific, the boat returned to Britain at Rothesay on 7 December 1945, after a stop in Hong Kong.[7]
In April 1947 she was taken in hand at Chatham Dockyard for reconstruction as a high-speed trials submarine.[8] As completed the following year, her ballast tanks had been moved from the sides of the pressure-hull to its underside, all torpedo tubes removed, the conning tower cut down and streamlined, the existing diesels and electric motors taken out and replaced by a single Paxman diesel-generator set as fitted in U-class submarines and electric motors of the kind fitted in A-class submarines; two additional sets of batteries were also installed, doubling electrical storage. The new machinery gave a maximum of 3600shp and up to 17 knots submerged speed. Various further modifications to the conning tower and casing were made from 1950, with a large streamlined sail installed in 1952, and a new rounded bow in 1960.
As rebuilt, Scotsman underwent a long series of trials, as well as taking part in the Fleet Review to celebrate the Coronation of Queen Elizabeth II in 1953.[9] Her last duty was to be deeply submerged to test the crush-strength of her hull, in Kames Bay in 1964. Sunk as a result, the hulk was raised by the Admiralty lifting craft LC10 and LC11, arriving at Troon on 19 November 1964 to be broken up by the West of Scotland Shipbreaking Company.