HMS Australia was one of seven armoured cruisers built for the Royal Navy in the mid-1880s. She was assigned to the Mediterranean Fleet in 1889 and remained there until 1893 when she returned home. The ship was assigned to the Coast Guard Squadron for the next decade before she was placed in reserve in 1903. Australia was sold for scrap in 1905.
Australia had a length between perpendiculars of 300feet, a beam of 56feet and a draught of 24feet. Designed to displace 5040LT, all of the Orlando-class ships proved to be overweight and displaced approximately 5535LT.
The ship was powered by a pair of three-cylinder triple-expansion steam engines, each driving one shaft, which were designed to produce a total of 8500ihp and a maximum speed of 18kn using steam provided by four boilers with forced draught. During her sea trials, Australia reached . The ship carried a maximum of 900LT of coal which was designed to give her a range of 8000nmi at a speed of . The ship's complement was 484 officers and ratings.[1]
Australias main armament consisted of two breech-loading (BL) 9.2adj=onNaNadj=on Mk V guns, one gun fore and aft of the superstructure on pivot mounts. Her secondary armament was ten BL 6adj=onNaNadj=on guns, five on each broadside. Protection against torpedo boats was provided by six quick-firing (QF) 6-pounder Hotchkiss guns and ten QF 3-pounder Hotchkiss guns, most of which were mounted on the main deck in broadside positions. The ship was also armed with six 18-inch (457 mm) torpedo tubes: four on the broadside above water and one each in the bow and stern below water.[1]
The ship was protected by a waterline compound armour belt 10inches thick. It covered the middle 200feet of the ship and was 5inchesft6inchesin (ftin) high.[1] Because the ship was overweight, the top of the armour belt was below the waterline when she was fully loaded.[2] The ends of the armour belt were closed off by transverse bulkheads 16inches. The lower deck was 2inches-3inchesin (-in) thick over the full length of the hull. The conning tower was protected by 12inches of armour.[1]
Australia, named for the Australian continent,[3] was laid down on 21 April 1885 by Robert Napier and Sons at their shipyard in Govan, Glasgow.
The ship was launched on 25 November 1886, and completed on 11 December 1888.[4] Shortly after commissioning, she was assigned to the Mediterranean Fleet and remained there until 1893 when she participated in the Columbian Review held in New York City that year to commemorate the 400th anniversary of Columbus' discovery of the New World.
Upon her return home, Australia became the coast guard ship for Southampton Water for the next decade.[5] Captain Charles Henry Adair was briefly in command from November 1899 to January 1900, when Captain George Neville was appointed in command on 20 January 1900.[6] She escorted the royal yacht when Queen Victoria visited Ireland in April 1900,[7] and in September the following year she visited Germany and Denmark when she escorted the royal yacht carrying King Edward VII from Hamburg to Elsinore.[8]
She took part in the fleet review held at Spithead on 16 August 1902 for the coronation of King Edward VII.[9] Captain Charles Home Cochran was appointed in command on 24 November 1902,[10] but the ship was placed in reserve at Chatham Dockyard in early 1903, before being sold for scrap on 4 April 1905.