See main article: River-class torpedo-boat destroyer. Swan was one of six s built for the RAN.[1] The destroyer had a displacement of 750 tons, was 250feet long overall and long between perpendiculars, had a beam of 24feet, and a maximum draught of 8feet.[1] Propulsion machinery consisted of three Yarrow boilers feeding Parsons turbines, which supplied to the ship's three propeller shafts.[2] Although designed to reach, Swan was capable of reaching a maximum speed half a knot greater.[1] Maximum range was at .[2] The ship's company consisted of 4 officers and 67 sailors.[2]
The destroyer's main armament consisted of a BL 4-inch Mark VIII gun, supplemented by three QF 12-pounder 12 cwt guns.[1] This was supplemented by three single 18 inch (450 mm) torpedo tubes and three .303-inch machine guns.[1] Later in the ship's career, two depth charge throwers and four depth charge chutes were installed.[2]
Swan was laid down by the Cockatoo Docks and Engineering Company at Sydney in New South Wales on 22 January 1913.[3] She was launched on 11 December 1915 by the wife of Sir William Rooke Creswell, the First Naval Member of the Australian Commonwealth Naval Board.[2] The destroyer was commissioned into the RAN on 16 August 1916, six days before construction work concluded.[2] The ship's name comes from the Swan River in Western Australia.[1]
Swans first operation was with British blockade forces in the Far East, particularly around the Philippines, Celebes, and Malaya.[2] On 2 July 1917, the destroyer sailed for the Mediterranean, meeting all five of her sister ships en route.[2] The Australian destroyers were based at Brindisi as an anti-submarine force.[2] The patrols were uneventful, and the only action Swan saw was when she was diverted to perform shore bombardments during the Second Battle of Durazzo on 2 October 1918.[2] On 25 October, Swan and sailed to Port Said to meet a troop transport convoy and their Japanese escort, and accompany them to Salonika.[2] The ship received the battle honour "Adriatic 1917–18" for her wartime service.[4] [5]
After the end of World War I, Swan was assigned to an Allied fleet responsible for taking over Russian anti-Bolshevik naval units as Sebastapol. She then sailed in December with the French destroyer to report on conditions in the eastern Ukraine, although they reached their destination, an advance by Bolshevik forces caused the cancellation of the mission.[2] Swan sailed to Gibraltar, where she, her sister ships, and the cruiser departed for Australia on 3 January 1919.[2] Swan operated in Australian waters until June 1920, when she was placed in reserve.[2] In 1925, the destroyer was reactivated and sent to Tasmania, where she spent the next two years alternating between operational and reserve status.[2]
Swan was paid off for the final time at Sydney on 15 May 1928 and sold to Cockatoo Island Dockyard for scrapping in 1930.[2] Swan and sister ship were stripped down, and their hulks were sold to New South Wales Penal Department and towed to Cowan Creek, where they were used to house prisoner labourers working on roads along the Hawkesbury River.[2] Public outcry opposed this use of prison labour, so two hulks were sold in 1933 for 12 pounds each to George Rhodes of Cowan, New South Wales, who intended to use them as accommodation for fishers.[6] [7] Rhodes' plan did not gain government approval, and the ships were sold on to a pair of fishermen, who used them to transport blue metal to Milson and Peat Islands.[6]
On 2 February 1934, Swan and Parramatta were being towed down the Hawkesbury River for final breaking in Sydney, when gale conditions caused both hulls to break their tows.[6] While Parramatta ran aground, Swan filled with rainwater and capsized at Tumbledown, near Croppy Point and Wobbly Beach.[6] [7] The exact location of the wreck was forgotten until 1994 When Greig Berry, a researcher/diver from the Central Coast claimed to have found it in 19 metres of water near Little Wobbie public wharf. He in turn was contacted by the DSTO and Berry showed them the site in 1996 and several sonar runs positively identified the remains as Swan. A RAN hydrography team came across the wreck while updating charts in 2001.[7] Diving the wreck is not advised, as while Swan sits in only 20m (70feet) of water, the currents in the area flow at around, and visibility is less than .[7] [8] The wreck is located in -33.5489°N 151.2497°W.[9]