| Guangzhou–Sanshui railway | |
| Linelength: | 490NaN0 |
| Locale: | Guangdong |
| Map Name: | Stations and structures |
| Order: | st |
| S: | 广三铁路 |
| T: | 廣三鐵路 |
| P: | Guǎngsān Tiělù |
| J: | gwong2saam1 tit3lou6 |
The Guangzhou–Sanshui railway or Guangsan railway, historically known as the Canton–Sam Shui railway, is a railway line in Guangdong province, built from 1902 to 1904. In 2004, the line merged with the Sanshui–Maoming railway to form the Guangzhou–Maoming railway.
The 32 mile-long railway line from Canton (Guangzhou) to Sam Shui (Sanshui) was constructed between 1902 and 1904 by the American China Development Company. Commencing from its Shek Wei Tong: terminus and depot in Canton (Guangzhou) this short line was built as a branch line of the Canton–Hankow (Guangzhou–Hankou) railway and was the first portion of this southern trunk line to be constructed. The first 10 miles from Canton to Fatshan (Foshan) opened in late 1903 and the remainder to Sam Shui was completed and formally opened on 23 September 1904.[1] [2]
The origins of this railway go back to the so-called “Battle for Concessions” during 1898 when Western powers bickered among themselves over the extraction of railway concessions from the Qing Dynasty government, severely weakened by their loss of the war with Japan over Korea. Not wishing to be left out of the fray, a powerful American syndicate known as the American China Development Company, formed under the auspices of financier Calvin Brice in April 1898, obtained a concession for the construction of the 750miles-long Canton–Hankow (Guangzhou–Wuhan) Railway. In the autumn of 1898 a team of American engineers led by Chief Engineer William Barclay Parsons was dispatched to China to conduct the survey. Barclay Parsons describes the difficulties endured during this survey in his own account of this work “An American in China” published in 1900 after his return to USA.[3]
The American syndicate soon ran into all kinds of difficulties. The Spanish–American War had broken out causing a shortage of funds. On top of this, the leading driver of the scheme, Senator Brice, died leaving the syndicate without any enthusiastic and wealthy investors. Many of the Americans, who owned shares, became disillusioned and gradually sold out to French-Belgian interests, while the battle for control of the line continued. The next incident to delay the construction was the 1900 Boxer Uprising. However eventually in the autumn of 1902, with the American syndicate now under the presidency of Barclay Parsons, the short Canton-Sam Shui branch line was commenced. The American team of engineers sent to build the branch was headed by Chief Engineer C.W. Mead CE.[2]
The first section of about 10 miles from Canton (Guangzhou) to Fatshan (Foshan) was double-tracked standard gauge line using 75lb steel rails. Because of the shortage of funds economies were made by purchasing used equipment from the United States and this included eight reconditioned ex-Manhattan Elevated Railway"Forney"-type tank locomotives, which had been built in 1885–1886 and were designed for running backwards (cab-first).[4] Most of the stations along the route were initially small temporary mat-shed structures and the only permanent station erected in time for the opening of the railway was at Fatshan. This section was opened to traffic in late 1903.
Construction of the next section from Foshan to Sanshui was then continued and a ceremony attended by the railway's senior staff and a number of invited guests was held on 22 September 1904 to drive in the ‘last (silver) spike’, marking completion of the line.[5] By this time the railway had received its first two-passenger engines which were 4-4-0 tender locomotives built by the American Locomotive Company of Pittsburgh in 1903. In later years it acquired similar locomotives from both the Baldwin and Lima locomotive companies[6]
While the Guangzhou–Hankou Railway was stalled, the Belgians were making good progress on the Beijing–Hankou Railway. A diplomatic incident arose when it was discovered that the French and Belgians had purchased a majority stake in the American China Development Company. This contravened the Chinese decision to prevent a single foreign power from controlling the Beijing–Guangzhou Railway by awarding two concessions to different countries. Growing opposition to foreign ownership of railways pushed the Chinese government to cancel the American concession in December 1904, putting the Guangzhou–Sanshui Railway into Chinese hands. The Belgian concession for the Beijing–Hankou Railway would also be redeemed in 1909.[7]
By 1909 the Shek Wei Tong maintenance depot in Canton had been enlarged and incorporated a machine shop and coach works capable of producing their own 60adj=midNaNadj=mid steel passenger coaches.[8] The railway still exists and continues to be known as the Guang-San line as far as Sam Shui (Sanshui) from where the line now extends as part of a Provincially owned Sanmao Railway Company line to Maoming.[9] [10] [11]