| Gougeon 32 | |
| Designer: | Jan Gougeon |
| Location: | United States |
| Year: | 1990 |
| No Built: | 14 |
| Builder: | Gougeon Brothers |
| Draft: | 4.25feet |
| Displacement: | 11000NaN0 |
| Hull Type: | Catamaran |
| Construction: | Fiberglass with balsa and foam cores |
| Loa: | 32feet |
| Lwl: | 32feet |
| Beam: | 8.3feet |
| Engine: | 80NaN0 outboard motor |
| Keel Type: | two daggerboards |
| Ballast: | 12000NaN0 water |
| Rudder Type: | two transom-mounted rudders |
| Rig Type: | Bermuda rig |
| Sailplan: | Fractional rigged sloop |
| Sailarea Main: | 187square feet |
| Sailarea Headsail: | 109square feet |
| Sailarea Total: | 296square feet |
The Gougeon 32 is an American trailerable catamaran that was designed by Jan Gougeon and first built in 1990.[1] [2] [3]
The design was built by Gougeon Brothers in Bay City, Michigan, United States. The company completed 14 examples of the type between 1990 and 1992, but it is now out of production.[1] [2] [3]
Gougeon Brothers is a composite manufacturing company, that has built many products from composite material and also developed their own materials and processes. By 1990 the company had built many custom-built racing sailboats, but had never embarked on a mass-market production boat design before.[1]
The Gougeon 32 was a project that the company embarked upon as a complementary effort while their wind turbine blade manufacturing was ramping up after three years out of production, following the wind turbine market's 1986 crash. The sailboat design was commenced in 1990 as an intended production commercial product that would also be used to development new composite materials and techniques.[1]
The boat's design goals were, "a lightweight, trailerable catamaran that was fast, fun to sail, had weekend accommodations for 2 or 3 and was priced below $35,000." The design was intended to reach a break-even point at a production rate of two boats per week and would be profitable at three boats per week. The design challenge was to build a boat of this size that could be transported on a trailer behind a mid-sized car, a requirement that restricted the design to a towed weight of a maximum of 22000NaN0.[1]
The design used a new manufacturing technique: single vacuum bag moulded epoxy resin laminate construction, conventional polyester gelcoat and reinforcing fibers fully wetted-out mechanically on a rolling machine. It used low-temperature cured epoxy resin with long cure times to achieve the desired finished physical properties. This process became the company's Pro-Set process, which has been commercially successful.[1]
In 1992 the company sold its wind turbine blade manufacturing business and terminated the catamaran production at the same time, having produced only 14 boats and never achieved full series production.[1]
The Gougeon 32 is a recreational sailboat, built predominantly of fiberglass with balsa and foam cores, with aluminum spars. It has a fractional sloop rig with a fully battened mainsail, a jib and provisions for a light wind drifter sail. The two hulls have plumb stems, vertical transoms, transom-hung rudders controlled by a central tiller and a daggerboard in each hull. It displaces 11000NaN0 and carries 12000NaN0 of flooding water ballast, 6000NaN0 in each hull. The ballast is drained for road transport.[1] [2] [3]
The boat has a draft of 4.25feet with the daggerboards extended, allowing beaching or ground transportation on a trailer with the boards retracted.[2] [3]
The boat is normally fitted with a small outboard motor for docking and maneuvering. The fuel tank holds .[2] [3]
The design has sleeping accommodation for two adults and two children. The cabin floor is padded and can be used for additional sleeping space, as can the open cockpit. The interior seating is made from fiberglass. The galley includes a small sink and a single-burner propane stove for cooking. The head is a portable type. A bow trampoline provides space and also deflects spray when sailing.[2] [3]
The mast is a rotating design, hinged for ground transport, folding forward over the towing vehicle. The mast is supported by a single set of shrouds and running backstays. The mainsail may be reefed by rolling around the rotating boom, while the jib has roller furling. There is a full-width mainsheet traveler and the mainsheet itself has an 8:1 mechanical advantage.[2]
The 14 boats in service have won numerous races.[1]
In the 2017 Race to Alaska, Russell Brown skippered his Gougeon 32, Incognito, to first place in the solo class.[4]
In a review Richard Sherwood described the design, "the Gougeon 32 is a big, fast, stable catamaran that can besailed by one or two and will sleep two adults and two children. In addition, you can camp out in the cockpit. Six hundred pounds of water ballast may be placed in each hull for stability, but may be drained for trailering.[2]
Similar sailboats