State: | GA |
Type: | SR |
Route: | 92 |
Map Custom: | yes |
Map Notes: | SR 92 highlighted in red |
Length Mi: | 97.81 |
Length Ref: | [1] |
Established: | January 1932 |
Direction A: | South |
Terminus A: | in Griffin |
Direction B: | North |
Terminus B: | in Roswell |
Counties: | Spalding, Fayette, Fulton, Douglas, Paulding, Cobb, Cherokee |
Previous Type: | SR |
Previous Route: | 91 |
Next Type: | SR |
Next Route: | 93 |
State Route 92 (SR 92) is a 97.81adj=midNaNadj=mid state highway in the U.S. state of Georgia. Its southern terminus is an intersection with US 19 Bus./US 41 Bus./SR 16 in Griffin. Its northern terminus is an intersection with SR 9/SR 120/SR 140 in Roswell. The highway connects Griffin to Roswell, via Fayetteville, Fairburn, Douglasville, Hiram, Acworth, and Woodstock. Primarily signed from south to north, SR 92 is a rural highway that travels through three county seats. It can be seen as a western bypass of the city of Atlanta.
The highway begins at the intersection between West McIntosh Road and North Expressway, the latter carrying US 19/US 41/SR 3, on the north side of Griffin. SR 92 runs westward away from the intersection in the middle of a commercial area of the city. The highway is a divided as it passes through residential subdivisions to exit town. Turning northwesterly on Fayetteville Road, SR 92 follows a two-lane roadway through rural Spalding County, running through a combination of woods and farm fields. The highway rounds the northern end of Heads Creek Reservoir before crossing the Flint River and into Fayette County. Past the river, the highway turns northward, running next to Lake Horton before entering the town of Woolsey. Continuing northward, the landscape transitions to residential subdivisions again as the highway enters the outskirts of Fayetteville. SR 92 follows Jimmie Mayfield Boulevard north before turning west onto Helen Sams Parkway, a divided highway. SR 92 turns back northward when it merges with SR 85; the two routes run concurrently northward on Glenn Street into downtown.[2]
In downtown Fayetteville, SR 85/SR 92 meets a pair of one-way streets that carry the two directions of SR 54. Further north, SR 92 separates from SR 85 when it turns northwesterly along Forest Avenue to exit downtown. It meanders north and northwesterly through subdivisions to exit the city near a pair of small airports, Coleman Field and McLendon Airport. SR 92 crosses into the southwestern corner of Fulton County near Fairburn, and it runs through a mixture of industrial parks and commercial zones. The highway passes over I-85, without an interchange, and crosses rail lines owned by CSX Transportation. SR 92 follows Campbellton Street through downtown, intersecting US 29/SR 14 in the middle of town. The highway then follows Campbellton–Fairburn Road north of town through an intersection with US 29 Alt./SR 14 Alt. (Fulton Parkway). At Campbellton, SR 92 merges with SR 154 to cross the Chattahoochee River and enter Douglas County.[2]
On the north bank of the Chattahoochee, SR 166 joins the concurrency, and the merged highway continues northward away from the river. SR 154 and SR 166 separate to turn to the southeast, and SR 92 continues its northward course along Fairburn Road into Douglasville. On the south side of town, the highway arcs westward and crosses I-20 at that freeway's exit 37. SR 92 passes into downtown and merges with to run westward with US 78/Georgia State Route 5 /SR 8 for several blocks before turn northward again. North of town, the highway crosses into Paulding County for the first time. There it follows Hiram–Douglasville Highway north into Hiram where it crosses a line of the Norfolk Southern Railway and intersects US 278/SR 6 (Jimmy Lee Smith Parkway).[2]
North of Hiram, SR 92 meets SR 360 and SR 120 in a pair of intersections while running northward through residential subdivisions on the western edge of the Atlanta metropolitan area. The roadway follows the county line and then crosses into Cobb County. It then returns to Paulding County again near the Pickett's Mill Battlefield. The state route follows Dallas–Acworth Highway back into Cobb County and past Allatoona High School before meeting US 41/SR 3 (Cobb Parkway). SR 92 turns southeasterly onto Cobb Parkway to cross one arm of Lake Allatoona. SR 92 leaves the parkway to turn northward across the dividing line between Lake Allatoona, and Lake Acworth, entering Acworth. The highway follows Lake Acworth Drive through town and parallel to I-75 before crossing that freeway and entering Cherokee County, Georgia.[2]
In Cherokee County, SR 92 turns eastward along Alabama Road. The highway crosses I-575 in Woodstock. As passing through exit 7 of that freeway, SR 92 then arcs to the southeast, crossing the extreme northeastern corner of Cobb County to enter Fulton County near Mountain Park. The highway continues southeasterly into Roswell where it terminates at an intersection with SR 9/SR 120 (Alpharetta Highway) and SR 140 (Holcomb Bridge Road).[2]
The following portions of SR 92 are part of the National Highway System, a system of routes determined to be the most important for the nation's economy, mobility, and defense:
The roadway that would eventually become SR 92 was established at least as early as 1919 as part of SR 42 from Fayetteville to Fairburn.[4] By the end of 1921, SR 42's path was shifted to the east. Its former path was redesignated as part of SR 54.[4] [5]
By the end of 1931, the southern half of this segment of SR 54 had a "sand clay or top soil" surface.[6] [7] In January 1932, SR 92 was established from US 78/SR 8 in Douglasville to SR 6 in Hiram.[7] [8] In December 1933, SR 92 was extended south-southeast to Fairburn with a ferry over the Chattahoochee River.[9] [10] The next year, SR 54's segment from Fayetteville to Fairburn was shifted southward. SR 92 was extended from Fairburn to Griffin, absorbing this segment.[11] [12] By the end of the year, the portion in Griffin had a completed hard surface. A portion northwest of Griffin, as well as the Fulton County portion of the Fairburn–Douglasville segment, was under construction.[12] [13] Early in 1935, the northern half of the Douglas County portion of the Fairburn–Douglasville segment was under construction.[13] [14] By the middle of the year, the southern half of this portion was also under construction.[14] [15] About a year later, a portion northwest of Griffin had a sand clay or top soil surface.[16] [17] A few months later, nearly the entire Douglas County portion of the Fairburn–Douglasville segment had completed grading, but was not surfaced.[18] [19] In 1938, a portion north of the Douglas–Paulding county line was under construction.[20] [21] By the middle of 1939, the northern half of the Fulton County portion of the Fairburn–Douglasville segment was under construction. Also, the southern part of the Douglas County portion of this segment had completed grading, but was not surfaced.[21] [22] Around the middle of the year, SR 92 was established from US 278/SR 6 in Dallas to US 41/SR 3 in Acworth. However, there is no indication if the highway was concurrent with SR 6 from Hiram to Dallas or if this was a completely separate segment. The crossing of the Chattahoochee River was indicated to have "no bridge or ferry". The northern half of the Fulton County portion of the Fairburn–Douglasville segment, as well as a portion from Douglasville to just south of Hiram, had completed grading, but was not surfaced.[22] [23] At the end of the year, a portion northeast of Dallas was under construction.[23] [24]
In the early part of 1940, this segment had completed grading, but was not surfaced.[24] [25] Later that year, a portion south of Hiram had a completed hard surface. The entire Dallas–Acworth segment was under construction.[25] [26] Before the year ended, SR 92 was extended northeast and east to SR 5 in Woodstock. A portion of the highway northeast of Dallas had a completed hard surface.[26] [27] In early 1941, the crossing of the Chattahoochee River was indicated to have a ferry again. The entire Paulding County portion of the Douglasville–Hiram segment had a completed hard surface.[27] [28] A few months later, the Douglas County portion of the Douglasville–Hiram segment was under construction.[28] [29] In 1944, a small portion north-northwest of Fayetteville had a sand clay or top soil surface.[30] [31] By the end of 1946, the Acworth–Woodstock segment was shifted to a more northerly winding course. The Douglas County portion of the Fairburn–Douglasville segment had completed grading, but was not surfaced. Also, a portion in the vicinity of New Hope was hard surfaced.[31] [32] By the end of 1948, nearly the entire Griffin–Fayetteville segment, the entire Fayette County portion of the Fayetteville–Fairburn segment, and the entire Cobb County portion of the highway, had a sand clay, top soil, or stabilized earth surface. A portion from the northern end of the SR 166 concurrency to Douglasville, and then to the Douglas–Paulding county line, as well as the entire Paulding County portion of the Dallas–Acworth segment, was hard surfaced.[32] [33] The next year, the entire segment of the highway from Griffin to Fayetteville was hard surfaced.[33] [34]
By the end of 1951, the Fulton County portion of Fayetteville–Fairburn segment was hard surfaced.[35] [36] By the middle of 1955, the western half of the Acworth–Woodstock segment was hard surfaced.[37] [38] About two years later, the entire length of SR 92 from Griffin to the SR 154 intersection just southeast of the Fulton–Douglas county line, and from the northern SR 166 intersection southeast of Douglasville to the SR 205 intersection west-northwest of Woodstock, was paved.[38] [39] At the end of the decade, the ferry was removed from the crossing of the Chattahoochee River. SR 92 from the SR 154 intersection just southeast of the Fulton–Douglas county line to the northern SR 166 intersection southeast of Douglasville was paved. From the Cobb–Cherokee county line to just west of the SR 205 intersection, SR 92 had completed grading, but was not surfaced.[40] [41]
By the end of 1963, SR 92 was extended east and southeast to a point just southeast of the second crossing of the Cherokee–Cobb county line. This entire extension was paved.[41] [42] Between 1963 and 1966, the segment of SR 92 from the SR 205 intersection to Woodstock was shifted south, which removed the concurrency with SR 5. Also, an unnumbered road was built from Hiram to New Hope.[42] [43] The next year, the segment of SR 92 from Dallas to New Hope was shifted to the southeast, onto this unnumbered road, which connected it more directly to the rest of the highway. The old alignment was redesignated as SR 92 Spur.[43] [44]
In 1970, an unnumbered road was built from US 278/SR 6 and SR 92 in Hiram to SR 92 in Cross Roads.[45] [46] In 1972, the Hiram–New Hope segment was shifted east to travel between Hiram and Cross Roads on the previously unnumbered road. SR 92's old alignment was redesignated as a northeast extension of SR 92 Spur.[47] [48] In 1988, SR 92 was extended southeast to Roswell.[49] [50]
State Route 92 Connector (SR 92 Conn.) was a connector route that existed between Hiram and New Hope.[51] The highway that would eventually become SR 92 Conn. was established at the end of 1940 as SR 176 from SR 6 in Hiram to SR 92 in New Hope.[26] [27] A portion of SR 176 just west of Lost Mountain had a "sand clay, top soil, or stabilized earth" surface.[32] [33] By the middle of 1950, a portion just west of Lost Mountain was hard surfaced.[34] [35] In 1953, a portion west of Lost Mountain had completed grading, but was not surfaced.[52] [53] By the middle of 1955, this entire segment of SR 176 had a sand clay, topsoil, or stabilized earth surface.[37] [38] About two years later, it was indicated to have a "topsoil or gravel, unpaved" surface.[38] [39] Between 1957 and 1960, it was paved.[39] [41] About a decade later, the segment of SR 176 between Lost Mountain and New Hope was shifted to the northeast. Its former alignment was redesignated as SR 92 Conn.[54] [45] In 1979, SR 92 Conn. was redesignated as SR 120 Conn.[55] [56]
State: | GA |
Type: | GA 1948-Conn |
Route: | 92 |
Location: | Dallas |
Formed: | 1946 |
Deleted: | 1950 |
State Route 92 Connector (SR 92 Conn.) was a connector route of SR 92 in Dallas. Between 1945 and the end of 1946, it was established from SR 6/SR 120 and SR 61 in the eastern part of the city to SR 92 in the northeast part of the city. Its entire length was hard surfaced.[31] [32] By the middle of 1950, it was decommissioned.[34] [35]
State: | GA |
Type: | GA 1948-Spur |
Route: | 92 |
Location: | Dallas |
Formed: | 1952 |
Deleted: | 1953 |
State Route 92 Spur (SR 92 Spur) was a spur route of SR 92 in Dallas. In 1952, it was established from SR 6/SR 120 and SR 61 in the eastern part of the city to SR 92 in the northeastern part.[36] [52] The next year, it was decommissioned.[52] [53]
Header Type: | former |
State: | GA |
Type: | GA 1960-Spur |
Route: | 92 |
Location: | Dallas–Cross Roads |
Formed: | 1966 |
Deleted: | 1979 |
State Route 92 Spur (SR 92 Spur) was a spur route of SR 92 that existed from Dallas to Cross Roads.[51] The roadway that would eventually become SR 92 Spur was built in 1939, when SR 92 was extended from Hiram to Acworth.[22] By the end of 1948, the entire length of SR 92 that would become the spur route was hard surfaced.[32] [33] In 1966, the Dallas–New Hope segment of SR 92 was shifted to the southeast. Its old alignment became SR 92 Spur.[43] [44] In 1972, the Hiram–New Hope segment of SR 92 was shifted east. Its old alignment between New Hope and Cross Roads became a northeast extension of SR 92 Spur.[47] [48] In 1979, SR 92 Spur was redesignated as SR 381.[55] [56]
On April 4, 1977, Southern Airways Flight 242 attempted a landing on the stretch of highway near New Hope after hail and heavy rain shattered its windshields and destroyed its engines. The DC-9 crashed, killing the flight crew, 60 passengers, and eight people on the ground. It also destroyed a gas station, grocery store, and other structures.[57]