The General Electric TF39 is a high-bypass turbofan engine that was developed to power the Lockheed C-5 Galaxy. The TF39 was the first high-power, high-bypass jet engine developed. The TF39 was further developed into the CF6 series of engines, and formed the basis of the LM2500 and LM6000 marine and industrial gas turbine. On September 7, 2017, the last active C-5A powered with TF39 engines made its final flight to Davis-Monthan Air Force Base for retirement.[1] [2] The TF39 was effectively retired, and all remaining active C-5 Galaxies are now powered by F138 (General Electric CF6-80C2) engines.
The United States Air Force opened the "CX-X Program" in 1964, intending to produce a next-generation strategic airlifter. Of the several airframe and engine proposals returned for consideration, Lockheed's aircraft and General Electric's engine were selected for the new design in 1965.
The high-bypass turbofan was a huge leap in engine performance, offering a thrust of 43,000 pounds, while improving fuel efficiency by about 25%.[3] The TF39 had an 8:1 bypass ratio, a 25:1 compressor pressure ratio, and a 2,500 °F (1,370 °C) turbine temperature made possible by advanced forced-air cooling. The first engine went for testing in 1965. Between 1968 and 1971, 463 TF39-1 and -1A engines were produced and delivered to power the C-5A fleet.
The TF39 was a revolutionary 1960s engine rated from 41,000 to 43,000 lbf (191 to 205 kN) of thrust. It introduced use of a large by-pass ratio which, together with advances in core technology, contributed to a significant improvement in fuel efficiency over engines available at the time.
The engine included features developed from previous GE engines:
The high-bypass ratio of 8:1 for the TF-39 had its origins in the lift-fan technology demonstrated by GE in the XV-5 Vertifan aircraft. This aircraft had two X353-5 engines, each consisting of a 62.5-inch-diameter[6] lift-fan driven by a gas generator (J85). The bpr in VTOL operation was 12.3.[7] This tip-turbine driven lift-fan concept was turned 90 degrees and developed as an 80-inch-diameter "cruise fan" demonstrator, driven by a J79 gas generator. For the CX-X program GE demonstrated a half-scale engine, the GE1/6, with 15,830 lb thrust and an sfc of 0.336.[8] This was developed into the TF39 with a 97 in diameter fan.