| Gallager carbine | |
| Type: | Black powder breechloading rifle |
| Origin: | United States |
| Service: | 1861 |
| Used By: | United States Army |
| Wars: | American Civil War |
| Length: | 30 in (762mm) |
| Caliber: | .50, .56-52 Spencer, .44 |
| Action: | Single-shot, breech-loaded, percussion cap actuated |
| Rate: | 3 rounds/minute |
| Sights: | Iron front and rear |
The Gallager carbine is an American black powder breechloading rifle produced in the American Civil War.
The weapon was designed by Mahlon J. Gallager, who licensed the design to Richardson and Overman of Philadelphia for production. On 31 August 1861 the first weapons were sold to the Army.
The Gallager was loaded from the rear with brass cases, which contained the projectile and the propellant. Covered by a disc made of greased felt, the projectile was inserted in the barrel after it was tilted up by a lever, followed by the case, and (like the concurrent muzzleloaders, such as the Springfield) were ignited by percussion cap, which was placed on the bolt face. The brass cases had a paper patch in the base, to prevent powder seepage and still allow the cap to fire the round. The weapon was 0.525inches caliber with a 22inches barrel.
The rifle was strongly made, but unpopular with troops. Frequently, the cases stuck due to expansion of the front part and had to be laboriously removed.
A total of 17,782 were sold to the U.S. Army.[1]
According to the Government Procurement of Gallager Carbines, 17,728 Gallager 1860 carbines were delivered to the army by the end of 1864.
In 1865, Mahlon L. Gallager modified this carbine. He adapted it to be fed with the .50/52 Spencer cartridge. This cartridge was a rimfire cartridge, and in place of the nipple on which the percussion cap was placed, he placed a massive firing pin, which, when struck by the cock, caused the gun to fire. The Spencer cartridge had a rim, which made it possible to equip the Gallager carbine with an extractor and eliminate the hassle of cartridges extraction.
In 1865, the modified carbine was presented to the Ordnance Department. After the presentation, the Ordnance Department ordered the modification of 5,000 Gallager carbines with a cap lock to the new version.
According to the Government Procurement of Gallager Carbines, 5,000 modified Gallager 1865 carbines were delivered to the army by the June 1865.After being withdrawn from the US Army's armament, Gallager carbines found their way into the civilian market.
Richardson & Overman still briefly produced modified Gallager carbines for the civilian market, but with the market saturated with military demobilized weapons, production was halted in the second half of the 1860s.
Many of the carbines were modified to thin-walled cartridges with a rim and cartridges extractor. This eliminated problems with gas blowback and cartridges extraction.In 1870, Schuyler, Hartley and Graham of New York City purchased from the Government 2,500 of the Gallagers chambered for the Spencer cartridge at a cost of $12.25 each and shipped them to France for the Franco-Prussian War.
The Gallager carbines, after the warfare in the 19th century, were modified in various variants for private use by shooters, due to their solid workmanship.
They can now be found on the collector market in the US and Europe in various calibers.[2]
http://www.oshkoshmuseum.org/Virtual/exhibit3/images/e30257b.jpg