GWR locomotive numbering and classification explained

The GWR was the longest-lived of the pre-nationalisation railway companies in Britain, surviving the 'Grouping' of the railways in 1923 almost unchanged. As a result, the history of its numbering and classification of locomotives is relatively complicated. This page explains the principal systems that were used.

Numbering

Broad Gauge Era

From the start, the GWR gave names only to its broad gauge locomotive stock. However, many classes carried 'themed' names, e.g. stars or signs of the zodiac, which aided identification of locomotives to some extent. See List of 7-foot gauge railway locomotive names

The exception to this rule was that any broad gauge locomotives the GWR absorbed from other railways (in particular, the South Devon Railway and Bristol and Exeter Railway) were given numbers in the 2000-2199 series. This applied even where locomotives had carried names under their previous owner (indeed, these names were usually removed by the GWR) and even when the locomotives had originally belonged to the GWR and had been sold out of stock.

Towards the end of the broad gauge era, a number of locomotives were built to a design that enabled them to be easily converted from one gauge to the other (hence the term 'convertibles' used for these locomotives). These engines also carried numbers in the standard gauge series, whether or not they were running in broad gauge form.

Standard Gauge 1854-1875

Initially standard gauge locomotive numbering was a simple sequential system, starting from 1. Numbering in this series, which included new locomotives and those absorbed from other railways, eventually reached 1297.New locomotives were identified as being paid from either revenue or capital account. Initially an effort was made to treat the numbering of locomotives bought out of revenue differently from those out of capital, including by re-using old numbers left vacant following withdrawal, using a duplicate number system (unusually, giving the new locomotives an A suffix - other railways tended to apply such notation to the old locomotive being replaced) and, for a few years, using the series 1000 (later 1001) upwards. In 1875, the sequential system starting at 1 reached 1000 and then jumped to 1116, the other side of the latter range of numbers still carried.

Standard Gauge 1875-1902

Under William Dean's leadership, blocks of numbers were allocated for different locomotive types, as follows:

NumbersTypes
1298 to 1400Absorbed standard and narrow gauge locomotives
1401 to 1500Passenger tank locomotives
1501 to 2000Goods tank locomotives
2001 to 2200Absorbed broad gauge locomotives (later reused for goods tank locomotives)
2201 to 3000Goods tender locomotives
3001 to 32004-2-2 express passenger locomotives
3201 to 35002-4-0 and 4-4-0 express passenger locomotives
3501 to 3600Passenger tank locomotives

The only exceptions to these principles under Dean were use of the 20xx, 21xx, and 27xx series for goods tank engines after the end of broad gauge operations. Experimental locomotives and other small classes continued to be numbered in gaps left following withdrawals in the number series below 1000.

Standard Gauge 1902-1912

Under George Jackson Churchward, the system applied by William Dean broke down, and new classes simply took the next free block of hundred numbers starting at xx01, with experimental engines numbered in odd gaps in the earlier series of numbers, usually below 110.

1912 Renumbering

In December 1912 (the official date being 28 December), the GWR undertook a renumbering of some of its locomotives — mainly 4-4-0 classes — so that locomotives of the same class were numbered consecutively. This desirable aim was made more important following the rebuilding of some Duke and Atbara locomotives to Bulldog and City class designs. A few of the changes were connected with a decision that blocks of numbers for each class should start at xx00 rather than xx01 as previously.[1]

4-4-0 classes!Class!Original Numbers!New Number Range!Notes!Ref
Atbara3373-34124120-41483382 scrapped 1911;
3400-3409 rebuilt to City
[2]
Badminton3292-33114100-4119[3]
Bird3731-37453441-3455[4]
Bulldog (ex-Duke)Various (from 3253-3331)3300-3319[5]
Bulldog (new build)3332-3372, 3413-3432, 3443-3472, 3701-37303320-3440[6]
City (ex-Atbara)3400-34093700-3709[7]
City (new build)3433-3442 3710-3719[8]
County3473-3482, 3801-38303800, 3831-38393801-3830 not renumbered[9]
Duke3252-3291, 3312-3331 (various, total 40)3252-3291others rebuilt to Bulldog[10]
Flower4101-41204149-4168[11]
Other classes!Class!Wheel arrangement!Original Numbers!New Number Range!Ref
455 (Metro)2-4-0T36003500[12]
2600 (Aberdare)2-6-0332600[13]
27210-6-0T28002700[14]
28002-8-0972800[15]
2900 (Saint)4-6-0/4-4-298, 100, 171-1902998, 2900, 2971-2990[16]
31002-6-2T993100[17]
36002-4-2T113600[18]
4000 (Star)4-6-0404000[19]
44002-6-2T115, 3101-104400-10[20]
45002-6-2T2161-904500-29[21]
Cornwall Min. Rly0-6-0T14001398[22]

Standard Gauge 1912 onwards

From the time of the 1912 renumbering, a system was adopted for new locomotives where the second digit indicated the broad type of locomotive. For example, express passenger locomotives had x0xx numbers and large mixed traffic tender locomotives were x9xx. When a class numbered more than 100 locos, rather than continue the numbers consecutively the second digit remained constant (e.g. 4900 Class included 4900-4999, 5900-5999, and 6900 onwards).

At the same time, a change was made so that new classes usually commenced from the number xx00. There was a certain amount of renumbering so that the prototype locomotives for existing classes took the appropriate xx00 number before the series used by production locomotives. Thus, from this time on, numbers below 2000 were mainly occupied by old, absorbed or otherwise non-standard locomotives.

For the separate numbering of steam rail motors, petrol and diesel railcars, diesel shunters and gas turbine locomotives, see section Other number series below.

1923 Renumbering

In 1923, the GWR absorbed a number of small railway companies as part of the Grouping. The locomotives that it inherited were renumbered into gaps in the number series below 2199 left vacant by the withdrawal of older locomotives. Many of these engines were withdrawn after a short period of time, but those that survived in 1946 were subject to another renumbering to rationalise the system further (see below).

The bulk of the locomotives absorbed were renumbered into gaps in broad number ranges according to their wheel arrangement. Locomotives from the following railways were included in this scheme: Alexandra Docks Railway, Barry Railway, Cambrian Railways, Cardiff Railway, Midland and South Western Junction Railway, Port Talbot Railway, Rhondda and Swansea Bay Railway, Rhymney Railway, South Wales Mineral Railway, Taff Vale Railway, Vale of Rheidol Railway, and Welshpool and Llanfair Light Railway.

Locomotives from the Brecon and Merthyr Railway, Burry Port and Gwendraeth Valley Railway and Neath and Brecon Railway were also renumbered according to their wheel arrangement, but used a different set of number ranges.

The number ranges used for all these locomotives are set out below, but note that those engines that had previously been sold out of stock by the GWR regained their original GWR numbers, and were not allocated new numbers in these ranges:

Wheel ArrangementMain Number RangeBMR, BPGVR and NBR Range
0-4-4T2-23
2-6-024
4-4-4T25-27
0-6-2T30-60311-1375, 1668-1833
0-6-0T604-8432161-2199
0-6-0844-1013
4-4-01014-1128
4-4-0T1129-11841392
2-4-0T1189-11971400-1458
2-6-2T1199-1213
4-4-2T1301-13061391
2-4-2T1307-1326
2-4-01328-1336
0-4-0T1338-1343
0-6-4T1344-1357
0-8-2T1358-1386
0-8-01387-1390

The locomotives inherited by the GWR from other concerns were renumbered as follows:

1946 Renumbering

By 1946, the majority of the locomotives inherited at the 1923 Grouping had been withdrawn, as had most of the older GWR engines numbered below 2000. In order to tidy up the gaps in this number range, it was decided to renumber the surviving locomotives from each pre-Grouping company together. The series used were:

Oil burning locomotives

See main article: GWR oil burning steam locomotives. In 1946/7 a number of locomotives were converted to burn oil, and some were renumbered in the process. Eleven 4900 Hall Class locos were renumbered into the 3900 range. Twelve 2800 Class 2-8-0s and eight of the 2884 Class were renumbered into the 4800 range. To make way for these, the 4800 Class 0-4-2Ts were renumbered to the 1400 range. (In addition, five 4073 Castle Class and one 4300 Class 2-6-0 were converted, but not renumbered.) All engines were converted back to coal firing by 1950, and regained their original numbers. However, the 1400s were never renumbered back to 4800s.

Application by British Railways

When the GWR was nationalised as part of British Railways in 1948, its steam locomotives retained their numbers unchanged and new steam engines built to GWR designs continued to be allocated numbers in the same way as the GWR had done. However, its diesel locomotives were completely renumbered. They took numbers 15100-15107 in the 15xxx series allocated to pre-Nationalisation design diesel shunters.

Summary of post-1902 class numbering

GWR locomotive class numbering arranged by first and second digits
Legend
NN00-NN99 Each section has a title showing the range of one hundred locomotive numbers it covers
If any locomotive classes used numbers in that range, there will be a section for each class, as follows
First there is the number the class is known by (not necessarily in this range) linked to the appropriate article or article section
If the class was later renumbered away from this range, the later number range will be bracketed after the number following a > sign, and the section will be shaded pink
If the class was renumbered into this range, the earlier number range will be bracketed before the number preceding a > sign, and the section will be shaded blue
4-6-0 County (1945) Next will come the wheel arrangement, with any name that the class (or sub-class) was known by
1901–1966 Finally there is the date range during which any of the class was numbered in this range
-->x0 x1 x2 x3 x4 x5 x6 x7 x8 x9
0x

0000–0099

0100–0199

0200–0299

0300–0399

0400–0499

0500–0599

0600–0699

0700–0799

0800–0899

0900–0999

1x

1000–1099

1100–1199

1200–1299

1300–1399

1400–1499

1500–1599

1600–1699

1700–1799

1800–1899

1900–1999

2x

2000–2099

2100–2199

2200–2299

2300–2399

2400–2499

2500–2599

2600–2699

2700–2799

2800–2899

2900–2999

3x

3000–3099

3100–2199

3200–3299

3300–3399

3400–3499

3500–3599

3600–3699

3700–3799

3800–3899

3900–3999

4x

4000–4099

4100–4199

4200–4299

4300–4399

4400–4499

4500–4599

4600–4699

4700–4799

4800–4899

4900–4999

5x

5000–5099

5100–5199

5200–5299

5300–5399

5400–5499

5500–5599

5600–5699

5700–5799

5800–5899

5900–5999

6x

6000–6099

6100–6199

6200–6299

6300–6399

6400–6499

6500–6599

6600–6699

6700–6799

6800–6899

6900–6999

7x

7000–7099

7100–7199

7200–7299

7300–7399

7400–7499

7500–7599

7600–7699

7700–7799

7800–7899

7900–7999

8x

8000–8099

8100–8199

8200–8299

8300–8399

8400–8499

8500–8599

8600–8699

8700–8799

8800–8899

8900–8999

9x

9000–9099

9100–9199

9200–9299

9300–9399

9400–9499

9500–9599

9600–9699

9700–9799

9800–9899

9900–9999

Classification

A very simple system was adopted, whereby the name (for broad-gauge locomotives) or number of the first locomotive in a class became the classification for all locomotives in that class (e.g. 'Sun Class', '4000 Class'). After the end of the broad gauge, names were applied to principal passenger and mixed-traffic standard-gauge locomotives. These were often based on a single theme, which could also lend its name to describe a class, for example 'Stars', also known as the '4000 Class', whose names included 'North Star', 'Rising Star' etc.

However, the classes of locomotives inherited at the Grouping in 1923 continued to be referred to by the classification allocated to them by their original owner.

Other number series

In 1903, Churchward introduced the first steam rail motors, numbered 1 and 2. Construction continued until, by 1908, there were 99 consecutively-numbered rail motors in service.

In 1911, a single petrol-electric railcar was built, and given the number 100.

Collett experimented with a diesel railcar in 1933. Numbered 1, it was underpowered, but the results were sufficiently encouraging that further railcars with varying specifications followed, the fleet being numbered 1–38.

A number of diesel shunters were bought from 1933 on, and numbered 1, 2, and 501–507. These were renumbered to 15100–15107 by BR Western Region.

The GWR ordered two gas turbine locomotives in 1946, but neither was delivered until the GWR had given way to BR Western Region, which numbered them 18000 and 18100.

See also

References

Notes and References

  1. [#RCTSGWR1|RCTS Part 1]
  2. [#RCTSGWR7|RCTS Part 7]
  3. [#RCTSGWR7|RCTS Part 7]
  4. [#RCTSGWR7|RCTS Part 7]
  5. [#RCTSGWR7|RCTS Part 7]
  6. [#RCTSGWR7|RCTS Part 7]
  7. [#RCTSGWR7|RCTS Part 7]
  8. [#RCTSGWR7|RCTS Part 7]
  9. [#RCTSGWR9|RCTS Part 9]
  10. [#RCTSGWR7|RCTS Part 7]
  11. [#RCTSGWR7|RCTS Part 7]
  12. [#RCTSGWR6|RCTS Part 6]
  13. [#RCTSGWR7|RCTS Part 7]
  14. [#RCTSGWR9|RCTS Part 5]
  15. [#RCTSGWR9|RCTS Part 9]
  16. [#RCTSGWR8|RCTS Part 8]
  17. [#RCTSGWR9|RCTS Part 9]
  18. [#RCTSGWR6|RCTS Part 6]
  19. [#RCTSGWR8|RCTS Part 8]
  20. [#RCTSGWR9|RCTS Part 9]
  21. [#RCTSGWR9|RCTS Part 9]
  22. [#RCTSGWR3|RCTS Part 3]